Plantronics BACKBEAT 906, BACKBEAT 903 User Manual
Plantronics BackBeat™ 903/906
User Guide
ii
Welcome
Thank you for purchasing the Plantronics
BackBeat™ 903/906 headphones. This guide
contains instructions for setting up and using your
new headphones.
Before using this product, please refer to the
For Your Safety guide for important product safety
and charging information.
Getting Assistance
The Plantronics Customer Support Team is ready
to assist you. You can find answers to frequently
asked questions, ask a question using e-mail,
receive service over the Internet, or speak directly
with a representative. Visit www.plantronics.com/
support or call 1-866-363-BLUE (2583).
NOTE If you are considering returning this headset,
please contact the Customer Support Team first.
Registering Your Product
Visit the Customer Support area on
www.plantronics.com/productregistration to
register your product online so we can provide you
with the best service and technical support.
NOTE For pairing your headphones to your
Bluetooth® mobile phone, your Passkey
(PIN code) is 0000.
iii
EN
Contents
Package Contents and Features ................................................................2
Charging Your Headphones or Bluetooth Adaptor.....................................4
Pairing Your Headphones ...........................................................................5
Pairing Your Headphones and Phone/Device ................................... 5
Pairing Your Headphones and Bluetooth Adaptor ............................6
Adjusting the Fit .........................................................................................7
Headphones Phone Controls and Indicators .............................................8
Headphones Music Controls and Indicators ............................................12
Range .......................................................................................................14
Troubleshooting ........................................................................................15
Troubleshooting with Bluetooth Adaptor ........................................17
Product Specifications .............................................................................19
2
Package Contents and Features
AC Charger
Left Earpiece—Phone Controls
Telescoping/
Swivel Fit Adjustment
Call Control Button
(Answer/End)
LED Indicator
Charging Jack
Micro-USB
Connector(s)
[BackBeat 903] [BackBeat 906]
Power/Pairing Button
Stereo Cable
3
EN
Package Contents and Features
Right Earpiece—Music Controls
Telescoping/
Swivel Fit Adjustment
Play/Pause/
Bass Boost
OpenMic™ Button
Volume/Tracking/
Mute Button
Call Mute
Volume Down/
Track Back
Volume Up/
Track Fwd
Right Eartip
Bluetooth Adaptor
[included with
BackBeat 906 only]
3.5mm connector
(for headphone jack)
Power/Pairing Button
LED Indicator
Charging Jack
4
Charging Your Headphones or Bluetooth Adaptor
1
1 Plug the AC charger into a power outlet.
2 Connect the charger cable to the
headphones or Bluetooth adaptor.
3 Charge each for at least 1 hour before first
time use, or 3 hours to fully charge.
The LED indicator glows red while charging.
When fully charged, LED will turn blue until
unplugged. Do not use your headphones or
2 3
[BackBeat 906 shown]
Bluetooth adaptor while they are connected to
the charger.
NOTE Always charge at near room temperatures;
never charge battery at temperatures below 0ºC
(32ºF) or above 40ºC (104ºF).
CHARGING TIME
3 hours ...................
Full charge
1 hour .....................
Minimum charge
before first use
5
EN
Pairing Your Headphones and Phone/Device
SETTINGS
SETTINGS
Time and Date
Phone Settings
Bluetooth
Sound Settings
Network Services
Security
Reset Settings
SETTINGS
SETTINGS
Time and Date
Phone Settings
9xxBack Beat
Sound Settings
Network Services
Security
Reset Settings
SETTINGS
SETTINGS
Time and Date
Phone Settings
0000
Sound Settings
Network Services
Security
Reset Settings
SETTINGS
SETTINGS
Time an d Date
Phone Settings
Bluetoo th
Sound S ettin gs
Network Services
Security
Reset S ettin gs
1 Turn on your phone’s or device’s Bluetooth
feature.
2 With the headphones powered off, press
and hold the Power/Pairing button until the
LED indicator flashes blue and red.
3 Use the phone or device menu to search
for the Bluetooth headphones and select
9xxBackBeat.
See your phone’s or device’s user guide for more
information.
4 If prompted, enter 0000 for the PIN code/
passkey.
Some phones also require that you accept the
connection. Pairing is successful when the LED
indicator flashes blue.
®
1
2
3
4
Loading...