Plantronics BT600, B825 User Guide

5 (1)

Madone/Madone-M

User Guide

Contents

Overview

3

 

 

Charge stand

3

 

Headset

3

 

 

USB Bluetooth adapter

4

Connect and pair

5

 

Connect to PC

5

 

Pair your headset 5

 

Fit and charge

6

 

Right or left

6

 

Charge your headset

6

Load software

7

 

 

Customize your headset 7

The Basics

8

 

 

 

Make/Take/End Calls

8

Mute/unmute

 

8

 

Volume 8

 

 

 

Play or pause music

8

Track selection

8

 

Use sensors

8

 

 

ANC

9

 

 

 

More Features

10

 

 

DeepSleep Mode

10

 

Pair multiple devices

10

What's in the box

11

 

Support

12

 

 

 

2

Plantronics BT600, B825 User Guide

Overview

Charge stand

Headset

([ ])

 

 

 

 

 

 

 

ANC

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Volume up/down

 

 

 

 

 

 

 

 

 

Track backward

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Play/pause music

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Track forward

 

 

 

 

 

 

 

 

 

 

ANC

Active noise cancelling

 

 

 

 

 

 

 

 

 

Charge port

 

 

 

 

 

 

 

 

 

Active call = mute/unmute, call waiting (softphone only). Idle = open mic

 

 

 

 

 

 

 

 

 

Headset LEDs

 

 

 

 

 

 

 

 

 

Call button ([ ])

 

 

 

 

 

 

 

 

 

Power button

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Bluetooth pair button

 

 

 

 

 

 

 

 

3

USB Bluetooth adapter

USB LEDs

What they mean

 

 

Red and blue flashes

Pairing

 

 

Solid Blue

Pairing successful; Connected

 

 

Blue flashes

On a call

 

 

Solid red

Mute active

 

 

Purple flashes

Streaming music/media from computer

 

 

4

Connect and pair

Connect to PC Your Bluetooth USB adapter comes pre-paired to your headset.

1Insert the Bluetooth USB adapter into your laptop or PC (not docking station).

2Headset call control Some softphones require downloading Plantronics Hub for Windows and

Mac at plantronics.com/software for headset button functionality.

NOTE Plantronics Hub software allows you to customize your headset's behavior through advanced settings and options.

Pair your headset 1 To put your headset in pair mode, press and hold the power button towards the Bluetooth icon until you hear "pairing" and the headset LEDs flash red and blue.

2Activate Bluetooth on your phone and set it to search for new devices.

iPhone Settings > Bluetooth > On*

Android Settings > On > Scan for devices*

NOTE *Menus may vary by device.

3Select “PLT_Madone.”

If necessary, enter four zeros (0000) for the passcode or accept the connection.

Once successfully paired, you hear “pairing successful” and the headset LEDs stop flashing.

NOTE Your headset can pair with up to 8 devices but only maintain 2 connections simultaneously; this includes the Bluetooth USB adapter.

5

Loading...
+ 9 hidden pages