Plantronics 3200 UC User manual

Voyager 3200 UC

Bluetooth Headset System

User Guide

Headset overview 3

Be safe 3 Charge case overview 4

Charge 5

Check headset battery status 5 Use the charge case 6

Fit 7

Adjust the

Pair 8

Bluetooth pairing 8 Use with computer 8 Conﬁgure for media 8 USB Bluetooth adapter 9 Pair USB adapter again 9 NFC pairing 9 Pair mode 9

ﬁt 7

Load software 10

The Basics 11

Make/Take/End Calls 11 Voice control 12 Adjust the volume 12 Play or pause streaming audio 12 Use sensors 12

More Features 14

Select language 14 Modify the answer/ignore voice commands 14 Use two phones 14 Change headset settings 14

Update

ﬁrmware 16

Headset recovery 16

Troubleshooting 17

Support 18

00:02

Headset overview

Bluetooth pair

Be safe

Near Field Communication (NFC) pair

Call

Play/Pause

Volume

Micro-USB charge port

Headset LED (indicator light)

Voice control (Siri, Google Now, Cortana)

Mute

Power

Please read the safety guide for important safety, charging, battery and regulatory information before using your new headset.

1 2 3

Charge case overview

Charge case LEDs; indicates case/headset battery status

Charge case: Touch the icon to display the charge case battery status

Headset: Touch the icon to display the headset battery status

Micro-USB charge port

It takes 90 minutes to fully charge the charge case. When fully charged, the charge case provides an extra 10 hours of battery life for the headset.

The optional Bluetooth USB adapter is stored in the charge case.

Charge

It takes 90 minutes to fully charge the headset. The indicator light turns off once charging is complete.

TIP To reset the accuracy of the talk time prompt, deplete the headset battery then charge fully.

Headset LED behavior while charging with micro USB cable

Off Charging complete

Battery high

Battery medium

Check headset battery

status

Battery low

Battery critical

There are several ways to check your headset battery status.

1 Wearing the headset, tap the Call 2 When not wearing the headset, tap the Call button and observe the headset LEDs. 3 Check Plantronics Hub home screen.

button and listen to the voice alert.

Use the charge case

A fully charged case can supply an additional 10 hours of headset talk time. It takes 90 minutes to fully charge the charge case. It takes 2 hours to fully charge the headset and charge case together.

IMPORTANT The charge case is placed in deep sleep mode after manufacturing to save power and

protect the battery. To wake-up the charge case, plug it into a power source for a minimum of 1 minute. The LED's flash when charging.

Check the charge case or headset battery status by touching/swiping either the case or headset icons. The LEDs indicate the battery status.

Battery status LEDs for charge case and headset