
RIG 700 Series
RIG 700HD, RIG 700HS, RIG 700HX
User Guide

Contents
Fit 3
Setup and basics 4
Setup PS4 4
Setup Xbox One 4
Setup PC 5
Charge 5
Power on or off 5
Adjust volume 5
Mute 6
Adjust mic monitoring 7
Support 8
2

Fit
Your headset components easily snap into the headset frame to configure the best fit and sound.
The headband adjusts to three sizes (small, medium, large) by moving the earcups. To remove an
earcup, press the earcup to detach it from the headband.
NOTE Headband style may vary.
3

Setup and basics
Your adapter comes pre-paired to your headset. After you adjust and charge
your headset and configure your adapter, power on your headset and it's
ready to go.
Setup PS4
PS4
1 Connect your adapter to your system.
2 Power on your PS4 and Check for updates
3 To adjust system audio settings, check your console user guide.
PS4 (slim version)
1 Connect your adapter to your system.
Setup Xbox One
2 Power on your PS4 and Check for updates
3 To adjust system audio settings, check your console user guide.
1 Connect your adapter to your system.
NOTE Ensure the switch on the back of the adapter is set to your preference: console or PC.
2
Power on your Xbox One and Check for updates
3
To adjust system audio settings, check your console user guide.
4

Setup PC
1 Connect your adapter to your system.
IMPORTANT Optical cable connection is only for RIG 700HD and RIG 700HS.
2 RIG 700HX only: Ensure the switch on the back of the adapter is set to "PC."
Charge
Power on or off
It takes 2 hours to fully charge the headset. The headset LED turns off once charging is complete.
Press the Power button for 2 seconds until you hear “power on" or "power off."
Adjust volume
1
To increase or decrease the game and chat volume, adjust the top headset dial.
2
To increase or decrease the master volume, adjust the bottom headset dial.
5

IMPORTANT For the PS4 (slim version), set the top headset dial in the middle; game and chat
remain balanced. Use the bottom headset dial to increase or decrease the master volume.
Mute
Tap the Mute button to mute or unmute your headset.
6

None
Low
High
Press and hold
Adjust mic monitoring
Press and hold the Mute button to cycle through mic monitoring levels. Mic monitoring lets you
hear your own voice in the headset.
Press and hold the Mute button and hear Mic monitoring level
one tone None
two tones Low
three tones High
7

Support
NEED MORE HELP?
plantronics.com/support
Plantronics, Inc.
345 Encinal Street
Santa Cruz, CA 95060
United States
©
2019 Plantronics, Inc. All trademarks are the property of their respective owners.
Patents pending.
214554-06 (05.19)
Plantronics B.V.
Scorpius 171
2132 LR Hoofddorp
Netherlands