Plantronics 211822-99 User Manual

BackBeat GO 810 Series
User Guide

Contents

Pair 3
Get Paired 3 Pair second device 3 Pair to Mac 3
Charge 4
The basics 5
Headset overview 5 Power on/off 5 Play/pause music 5 Track selection 5 Activate voice assistant 5 Make/Take/End Calls 6 Mute 6 ANC 6 Set EQ 6 Find your headset 6
Support 7
2

Pair

Get Paired

Pair second device

The first time you power on your headphones, the pairing process begins.
1 Slide the power switch on. You hear "pairing" and the LEDs flash red and white.
2 Activate Bluetooth
iPhone Settings > Bluetooth > On*
Android Settings > Bluetooth: On > Scan for devices*
®
on your phone and set it to search for new devices.
NOTE *Menus may vary by device.
3 Select “PLT BBGO800 Series.”
If necessary, enter four zeros (0000) for the passcode or accept the connection.
Once successfully paired, you hear “pairing successful” and the LEDs stop flashing.
1 Slide and hold the power button towards the Bluetooth icon until the LEDs flash red and white.

Pair to Mac

2 Select “PLT BBGO800 Series” in your device's Bluetooth Settings.
If your Mac is Bluetooth enabled, you can pair your headset to it.
1 Place your headset in pair mode (slide and hold the power button towards the Bluetooth icon). You
will hear "pairing" and the LEDs will flash red and blue.
2 On your Mac, choose Apple menu > System Preferences > Bluetooth. 3
Click Set Up New Device or "+", select "PLT BBGO800 series stereo" and follow the onscreen instructions.
3
Loading...
+ 4 hidden pages