Plantronics 210704-99 User Manual

BackBeat FIT 500 SERIES

User Guide

Contents

Pair 3

Get Paired 3
Pair second device 3
Pair to Mac 3

Charge and

Charge 4

The basics 5

Headset overview 5
Power on/off 5
Play/pause music 5
Track selection 5
Activate voice assistant 5
Make/Take/End Calls 5
Mute 6
Find your headset 6

Support 7

fit 4

2

Pair

Get Paired

Pair second device

The first time you power on your headphones, the pairing process begins.

1 Slide the power switch on. You hear "pairing" and the LEDs flash red and blue.

2 Activate Bluetooth

• iPhone Settings > Bluetooth > On*

• Android Settings > Bluetooth: On > Scan for devices*

®

on your phone and set it to search for new devices.

NOTE *Menus may vary by device.

3 Select “PLT BBFIT500 Series.”

If necessary, enter four zeros (0000) for the passcode or accept the connection.

Once successfully paired, you hear “pairing successful” and the LEDs stop flashing.

1 Slide and hold the power button towards the Bluetooth icon until the LEDs flash red and blue.

Pair to Mac

2 Select “PLT BBFIT500 Series” in your device's Bluetooth Settings.

If your Mac is Bluetooth enabled, you can pair your headset to it.

1 Place your headset in pair mode (slide and hold the power button towards the Bluetooth icon). You

will hear "pairing" and the LEDs will flash red and blue.

2 On your Mac, choose Apple menu > System Preferences > Bluetooth.
3 Click Set Up New Device or "+", select "PLT BBFIT500 series stereo" and follow the onscreen

instructions.

3