Contents
Inline controls overview 3
Be safe 3
Pair 4
Get paired 4
Pair mode 4
Basics 5
Power on or off 5
Answer or end a call 6
Adjust the volume 6
Music and more 7
Reconnect 10
Mute the headset 10
Redial 10
Charge and
Charge 11
Get the best sound 11
Wear the headset 12
Headset Features 13
Quick charge 13
Pair multiple devices 13
Use two devices 13
Voice control 14
Voice prompts 14
DeepSleep Mode 15
Install the app 15
Support 16
fit 11
2
voice
:02
:02:04
:02
:04
:02
Inline controls overview
+
+
-
-
+ or -
Charge port
Headset indicator light (LED)
Center button: Play/pause music
Center button: Activate voice dialing, search and other smartphone controls
Center button: Answer/end/decline call
Center button: Redial
Center button: Power on/off
Center button: Status check; battery level and connection status
Volume up button: Skip to next track
Volume up button: Increase volume
Volume down button: Play previous track
Volume down button: Decrease volume
Volume up or Volume down button: Mute/unmute
Be safe
Please read the safety guide for important safety, charging, battery and regulatory information
before using your new headset.
3
Pair
Get paired
The first time you power on your headset, the pairing process begins.
1 Power on the headset by pressing the Center button until you hear "pairing" and the LED light
flashes red and blue.
2 Activate Bluetooth
• iPhone > Settings > Bluetooth > On*
• Android > Settings > Bluetooth > On > Scan*
®
on your phone to search for new devices.
NOTE *Menus may vary by device.
3 Select “PLT BBFIT300 SERIES .”
If necessary, enter four zeros (0000) for the passcode or accept the connection.
Pair mode
Once successfully paired, you hear “pairing successful” and the indicator light stops flashing.
With the headset powered off, press and hold the Center button until you hear "pairing."
NOTE You can connect up to 2 devices to your headset.
4
Basics
Power on or off
Press the Center button for 2 seconds until you hear 'power on or 'power off'.'
5