Answer or end a call6
Adjust the volume6
Mute6
Redial6
Voice control6
Change language6
Pair mode6
Charge and
Charge7
Adjust the fit7
Headset Features8
Music and more8
Decipher the lights8
Voice prompts8
DeepSleep mode8
Install the app 8
Specifications9
Support10
fit7
2
What's in the box
Headset
USB charge cableOptional earloop
3
Headset overview
Headset LED (indicator light)
Be safe
Power button
Call button
Charge port
Volume down
Volume up
Track back
Track forward
Play/pause
Mute
Please read the safety guide for important safety, charging, battery and regulatory information
before using your new headset.
4
Pair
Get paired
1Wearing your headset, power it on.
2The first time you do, you will be prompted to select your language from a set of three options.*
NOTE *Language selection not available in Europe, Russia and Africa.
3When completed, you will hear "pairing;" go to the "settings" menu on your phone to connect to
your headset.
4Activate Bluetooth
• iPhoneSettings > Bluetooth > On*
• Android Settings > Bluetooth: On > Scan for devices*
®
on your phone and set it to search for new devices.
NOTE * Menus may vary by device.
5Select “PLT E80 Series.”
If necessary, enter four zeros (0000) for the passcode or accept the connection.
Pair mode
Once successfully paired, you hear “pairing successful” and the indicator
While wearing your headset, power it on. Press and hold the Call button until you hear "pairing."
You can pair up to 2 devices to your headset.
light stops flashing.
5
Basics
Answer or end a call
Adjust the volume
Mute
Redial
Voice control
Change language
Pair mode
Tap the Call button.
Tap the Volume up or Volume down button.
During a conversation, press both the Volume up
until you hear “mute on” or “mute off.”
Double-tap the Call button to call the last number you dialed.
Siri, Google Now™, Cortana Press the Call
to activate voice dialing, search, and other smartphone voice controls.
Reselect the headset language at any time by putting your headset into pair mode.*
NOTE *Language selection not available in Europe, Russia and Africa.
While wearing your headset, power it on. Press and hold the Call button until you hear "pairing."
You can pair up to 2 devices to your headset.
and Volume down buttons for 2 seconds
button for 2 seconds and wait for the phone prompt
6
Charge and fit
Charge
Adjust the fit
It takes 2 hours to fully charge the headset; the indicator light turns off once charging is
complete.
The universal-fit eartip has a thin loop that bends to gently tuck into the contours of either ear. To
adjust the fit, you can rotate the eartip on the headset or add the optional clip-on earloop.
7
Headset Features
Music and more
Decipher the lights
Voice prompts
Listen to your music, podcasts, navigation and other streaming audio on your headset.
Play or pause audio
Press both Volume buttons at the same time.
Skip to next track
Press the Volume up button for 2 seconds.
Play previous track
Press the Volume down button for 2 seconds to restart current track. Press the button twice
(each button press 2 seconds) to go to previous track.
Your headset has an indicator light that flashes in response to a change in status or after a
button press.
Some examples of what you will see are:
• Solid red until charging complete and then solid blue
• Flashing red and blue during pairing
• Double red flash when battery low
• Double blue flash at incoming call
Your headset tells you about status changes. For example:
“Power on”
DeepSleep mode
Install the app
“Pairing successful”
"Phone 1 connected"
“Talk time (x) hours”
“Mute on”
"Answering call"
“Recharge headset”
If you leave your headset powered on but out of range of your paired phone for more than 90
minutes, your headset will conserve its battery power by entering into a DeepSleep® mode.
Once back in range with your phone, press any button to exit DeepSleep mode. If your phone is
also ringing, tap the Call
Get the most from your headset by installing our free mobile app, Plantronics Hub for iOS/
Android. Explore all of your headset's features, view instructions, and contact Plantronics support
easily from your smartphone.
plantronics.com/apps
button again to answer your call.
8
Specifications
Talk Time
Standby Time
Operating Distance
(Range)
Headset Weight
Charge Connector
Battery Type
Charge Time
(Maximum)
DeepSleep mode
Power
Requirements
Bluetooth Version
Bluetooth Profiles
Moisture Protection
Up to 11 hours
Up to 16 days
Up to 33 feet (10 meters) from phone or table, Class II
2016 Plantronics, Inc. DeepSleep and Plantronics are trademarks of Plantronics, Inc. registered in the US and other countries. Explorer, Find MyHeadset,
Plantronics Hub and PLT are trademarks of Plantronics, Inc. Bluetooth is a registered trademark of Bluetooth SIG, Inc. and any use by Plantronics is under
license. Apple, the Apple logo, iPhone, and Siri are trademarks of Apple Inc., registered in the U.S. and other countries. All other trademark are the
property of their respective owners.
Patents: US 9,264,792; D717,771; patents pending.
206921-06 (04.16)
Plantronics BV
South Point Building C
Scorpius 140
2132 LR Hoofddorp, Netherlands
Loading...
+ hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.