Contents
Welcome 3
What's in the box 4
Get paired 5
Headset overview 6
Take control 7
Power on or off 7
Play or pause music 7
Skip to next track 7
Play previous track 7
Volume 7
Mute 7
Pairing mode 7
Reconnect 7
Charge 8
Fit 9
Check battery level 10
DeepSleep Mode 11
Specifications 12
2
Welcome
Congratulations on purchasing your new Plantronics product. This guide contains instructions for
setting up and using your Plantonics BackBeat Fit.
Please refer to the safety instructions for important product safety information prior to
installation or use of the product.
3
Get paired
The first time you power on your headphones, the pairing process begins.
1 Power on the headphones by pressing the power button until you hear "pair mode" and the LED
light flashes red and blue.
2 Activate Bluetooth
• iPhone Settings > Bluetooth > On*
• Android Settings > Bluetooth: On > Scan for devices*
®
on your phone and set it to search for new devices.
NOTE *Menus may vary by device.
3 Select “PLT_BBFIT.”
If necessary, enter four zeros (0000) for the passcode or accept the connection.
Once successfully paired, you hear “pairing successful” and the indicator light stops flashing.
5