Planet Technology IGS-801T, IGS-501, IGS-501T, IGS-801 User Manual

5/8-Port 10/100/1000Mbps

Industrial Gigabit Ethernet Switch

IGS-501 / IGS-801 / IGS-501T / IGS-801T

User's Manual

Trademarks

Contents subject to revision without prior notice.

PLANET is a registered trademark of PLANET Technology Corp. All other trademarks belong to their respective owners.

Disclaimer

PLANET Technology does not warrant that the hardware will work properly in all environments and applications, and makes no warranty and representation, either implied or expressed, with respect to

the quality, performance, merchantability, or tness for a particular

purpose.

PLANET has made every effort to ensure that this User’s Manual is accurate; PLANET disclaims liability for any inaccuracies or omissions that may have occurred.

Information in this User’s Manual is subject to change without notice and does not represent a commitment on the part of PLANET. PLANET assumes no responsibility for any inaccuracies that may be contained in this User’s Manual. PLANET makes no commitment to update or keep current the information in this User’s Manual, and reserves the right to make improvements to this User’s Manual and/or to the products described in this User’s Manual, at any time without notice.

If you nd information in this manual that is incorrect, misleading, or

incomplete, we would appreciate your comments and suggestions.

FCC Warning

This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the Instruction manual, may cause harmful interference to radio

communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense.

CE Mark Warning

This is a Class A product. In a domestic environment, this product may cause radio interference, in which case the user may be required to take adequate measures.

WEEE Warning

To avoid the potential effects on the environment and human health as a result of the presence of hazardous substances in electrical and electronic equipment, end users of electrical

and electronic equipment should understand the meaning of the crossed-out wheeled bin symbol. Do not dispose of WEEE as unsorted municipal waste and have to collect such WEEE separately.

Revision

PLANET 5/8-Port 10/100/1000Mbps Industrial Gigabit Ethernet Switch User's Manual

For Models: IGS-501 / IGS-801/ IGS-501T / IGS-801T

Revision: 1.0 (January, 2009)

Part No: EM-IGS-501_801_v1.0 (2350-AH0100-000)

Table Of Contents

1. INTRODUCTION ........................................................................ 6

.1 Package Contents ............................................................... 6

.2 How to Use This Manual ..................................................... 6

.3 Product Features ................................................................. 7

.4 Product Specications ......................................................... 8

2. INSTALLATION .........................................................................10

.1 Product Description ............................................................10

2.1.1 Product Overview .

2.1.2 Switch Front Panel .

2.1.3 LED Indicators .

2.1.4 Switch Upper Panel .

2.1.5 Wiring the Power Inputs .

2.1.6 Wiring the Fault Alarm Contact .

.2 Mounting Installation ..........................................................15

2.2.1 DIN-Rail mounting .

2.2.2 Wall Mount Plate Mounting .

3. APPLICAITON ...........................................................................18

. SWITCH OPERATION .................................................................20

.1 Address Table ....................................................................20

.2 Learning ...........................................................................20

.3 Forwarding & Filtering ........................................................20

.4 Store-and-Forward .............................................................21

.....................................................11

...................................................11

.........................................................12

..................................................13

...........................................13

..................................14

....................................................15

........................................17

4.5 Auto-Negotiation ................................................................21

5. TROUBLESHOOTING .................................................................22

APPENDIX A: NETWORKING CONNECTION .

A.1 Switch’s RJ-45 Pin Assignments .

A.2 RJ-45 cable Pin Assignments .

..........................................23

..............................................24

......................................23

1. INTRODUCTION

1.1 Package Contents

Check the contents of your package for following parts:

Industrial Gigabit Ethernet Switch x 1

User's manual x 1

DIN rail kit x 1

Wall mount kit x 1

If any of these are missing or damaged, please contact your dealer immediately, if possible, retain the carton including the original packing material, and use them against to repack the product in case there is a need to return it to us for repair.

1.2 How to Use This Manual

This Industrial Gigabit Ethernet Switch User Manual is structured as follows:

Chapter 2 Installation

The chapter explains the feature, functionality and the physical installation of the Industrial Gigabit Ethernet Switch.

Chapter 3 Application

The chapter explains the Industrial Gigabit Ethernet Switch application.

Chapter 4 Switch operation

The chapter explains the Industrial Gigabit Ethernet Switch transmit operation.

Chapter 5 Troubleshooting

The chapter explains the troubleshooting of the Industrial Gigabit Ethernet Switch.

Appendix A

This chapter contains cable information of the Industrial Gigabit Ethernet Switch.

1.3 Product Features

Physical Port

5-Port 10/100/1000Base-T RJ-45 with auto MDI/MDI-X function (IGS-

501 / IGS-501T)

8-Port 10/100/1000Base-T RJ-45 with auto MDI/MDI-X function (IGS-

801 / IGS-801T)

Layer 2 Features

Complies with IEEE 802.3 10Base-T, IEEE 802.3u 100Base-TX, IEEE

802.3ab 1000Base-T Ethernet standard

Supports Auto-negotiation and 10/100Mbps half / full duplex and

1000Mbps full duplex mode

High performance Store and Forward architecture, broadcast storm

control, runt/CRC ltering eliminates erroneous packets to optimize

the network bandwidth

Prevents packet loss with back pressure (Half-Duplex) and IEEE

802.3x PAUSE frame ow control (Full-Duplex)

Backplane (Switching Fabric): IGS-501 / IGS-501T: 10Gbps, IGS-801

/ IGS-801T: 16Gbps

Integrated address look-up engine, support 8K absolute MAC

addresses

136 kilobytes on-chip frame buffer on IGS-501 / IGS-501T

176 kilobytes on-chip frame buffer on IGS-801 / IGS-801T

9K Jumbo packet size support

Automatic address learning and address aging

CSMA/CD Protocol

Industrial Case / Installation

IP-30 Metal case / Protection

DIN Rail and Wall Mount Design

12 to 48V DC, redundant power with polarity reverse protect function

and connective removable terminal block for master and slave power

-10 to 60 Degree C operation temperature on IGT-501 / IGT-801

-40 to 75 Degree C operation temperature on IGT-501T / IGT-801T

1.4 Product Specications

Model IGS-501 IGS-801

Hardware Specication

10/100/1000Base-T Ports 5 8 Dimensions (W x D x H) 135mm x 87mm x 32mm Weight 455g 473g

Power Requirement

Power Consumption / Dissipation

Installation DIN rail kit and wall mount ear

Switch Specication

Switch Processing Scheme

Address Table 8K entries Buffer 136 kilobytes 176 kilobytes

Flow Control

Switch fabric 10Gbps 16Gbps

Throughput (packet per second)

Jumbo Frame 9K

Network cables

Standards Conformance

Standards Compliance

Temperature

Humidity Operating

Regulation Compliance FCC Part 15 Class A, CE

12~48 VDC, Redundant power with polarity reverse protection function

11.9 Watts / 40BTU 13.2 Watts / 45BTU

Store-and-Forward

Back pressure for half duplex, IEEE 802.3x Pause Frame for full duplex

7.4Mpps 11.9Mpps

10/100/1000Base-T: Cat. 3, 4, 5, 5e, 6 UTP cable (100meters, max.) EIA/TIA-568 100-ohm STP (100meters, max.)

IEEE 802.3 Ethernet IEEE 802.3u Fast Ethernet IEEE 802.3ab Gigabit Ethernet

IEEE 802.3x Full-duplex ow control

Operating: -10~60 Degree C Storage: -10~60 Degree C

Operating: 5% to 90%, Storage: 5% to 90% (Non-condensing)

+ 16 hidden pages