Copyright 2014 by PLANET Technology Corp. All rights reserved. No part of this publication may be
reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language or computer
language, in any form or by any means, electronic, mechanical, magnetic, optical, chemical, manual or
otherwise, without the prior written permission of PLANET.
PLANET makes no representations or warranties, either expressed or implied, with respect to the contents
hereof and specifically disclaims any warranties, merchantability or fitness for any particular purpose. Any
software described in this manual is sold or licensed "as is". Should the programs prove defective following
their purchase, the buyer (and not PLANET, its distributor, or its dealer) assumes the entire cost of all
necessary servicing, repair, and any incidental or consequential damages resulting from any defect in the
software. Further, PLANET reserves the right to revise this publication and to make changes from time to time
in the contents hereof without obligation to notify any person of such revision or changes.
All brand and product names mentioned in this manual are trademarks and/or registered trademarks of their
respective holders.
Federal Communication Commission Interference Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to
Part 15 of FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may cause harmful interference to
radio communications. However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the interference by
one or more of the following measures:
1. Reorient or relocate the receiving antenna.
2. Increase the separation between the equipment and receiver.
3. Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
4. Consult the dealer or an experienced radio technician for help.
FCC Caution
To assure continued compliance, for example, use only shielded interface cables when connecting to
computer or peripheral devices. Any changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the Following two conditions: (1)
This device may not cause harmful interference, and (2) this Device must accept any interference received,
including interference that may cause undesired operation.
Federal Communication Commission (FCC) Radiation Exposure
Statement
This equipment complies with FCC radiation exposure set forth for an uncontrolled environment. In order to
avoid the possibility of exceeding the FCC radio frequency exposure limits, human proximity to the antenna
shall not be less than 20 cm (8 inches) during normal operation.
2
PLANET 802.11n Wireless Presentation Gateway
WPG-210N
CE mark Warning
This is a class B device, in a domestic environment; this product may cause radio interference, in which case
the user may be required to take adequate measures.
R&TTE Compliance Statement
This equipment complies with all the requirements of DIRECTIVE 1999/5/CE OF THE EUROPEAN
PARLIAMENT AND THE COUNCIL OF 9 March 1999 on radio equipment and telecommunication terminal
Equipment and the mutual recognition of their conformity (R&TTE). The R&TTE Directive repeals and
replaces in the directive 98/13/EEC (Telecommunications Terminal Equipment and Satellite Earth Station
Equipment) As of April 8, 2000.
Safety
This equipment is designed with the utmost care for the safety of those who install and use it. However,
special attention must be paid to the dangers of electric shock and static electricity when working with
electrical equipment. All guidelines of this and of the computer manufacture must therefore be allowed at all
times to ensure the safe use of the equipment.
EU Countries Intended for Use
The ETSI version of this device is intended for home and office use in Austria Belgium, Denmark, Finland, and
France (with Frequency channel restrictions). Germany, Greece, Ireland, Italy, Luxembourg .The Netherlands,
Portugal, Spain, Sweden and United Kingdom.
The ETSI version of this device is also authorized for use in EFTA member states Iceland, Liechtenstein,
Norway and Switzerland.
WEEE regulation
To avoid the potential effects on the environment and human health as a result of the presence of
hazardous substances in electrical and electronic equipment, end users of electrical and
electronic equipment should understand the meaning of the crossed-out wheeled bin symbol. Do
not dispose of WEEE as unsorted municipal waste and have to collect such WEEE separately.
Revision
User Manual for PLANET 802.11n Wireless Presentation Gateway
Model: WPG-210N
Rev: 1.1 (April, 2014)
The following items should be contained in the package:
WPG-210N × 1
Wall-mount Kit x 1
If there is any item missing or damaged, please contact the seller immediately.
Antenna × 2
CD-ROM × 1
5V DC Power adapter +
World-Wide Plug Set × 1
Quick Installation Guide × 1
1.2 Product Description
Delivering Smooth Presentations Wirelessly
PLANET WPG-210N is a wireless presentation gateway based on IEEE 802.11n technology. It is equipped
with both VGA and HDMI video output interfaces and one 10/100Mbps Ethernet port for LAN connection. With
the hardware decoding capability, the WPG-210N can project high-definition video on the screen and audio
through wireless or wired LAN connections. It facilitates multiple users to freely display the presentations,
images and videos via wirelessly connecting to a projector or LCD TV without swapping lots of cables.
6
PLANET 802.11n Wireless Presentation Gateway
WPG-210N
Near Real-time High-quality Video and Audio Projection
The WPG-210N supports near real-time [30fps (frames per second)] image screen speed and audio
projection disregarding video format and resolution. Thus, the WPG-210N can be used not only for office presentation but also for home entertainment. Home users can easily share the multimedia on the big
monitor / screen with friends without cable hassle. Furthermore, the WPG-210N output resolution supports up
to 1440 x 900 (WXGA+), which performs high quality display in presentation or full-motion video.
Dual Video Output Interfaces
To deliver a perfect presentation solution, the WPG-210N is equipped with two types of video output
interfaces: the VGA and HDMI connectors compatible with most of the popular display devices. You can
connect it to any type of projector, LCD TV, or other large screen display wirelessly right away.
4-to-1 Split Screen Projection
With this 4-to-1 split screen feature, the WPG-210N allows up to four PC / Laptop screens to be projected
through one projector at the same time. Therefore, the participants can easily do side-by-side comparison
from four PCs / Laptops to increase meeting efficiency.
7
PLANET 802.11n Wireless Presentation Gateway
WPG-210N
High-speed 802.11n Wireless Connectivity
The WPG-210N features the latest IEEE 802.11n technology to provide improved wireless data rate speed up
to 300Mbps and wider coverage. The incredible wireless speed makes it ideal for handling high bandwidth
video stream, VoIP and data streams at the same time stably and smoothly. It is also backward compliant with
802.11g and 802.11b standards and thus, it is no need to change the existing network for maintaining
connectivity.
Easy to Use, Plug & Show
The embedded Windows-based utility enables the connected users to directly download the utility from the
WPG-210N web UI or simply execute the utility from the created USB token. It offers the most convenient way
for the new user to access the presentation in seconds. Just link the PC / laptop to the WPG-210N through
wireless or Ethernet and the wireless projection can be performed via the connected projector easily.
Internet / Intranet Connectivity
The WPG-210N is also a Wireless Access Point. The 10/100Mbps LAN port and 11n wireless performance
ensures the participants in the meeting are able to access the Internet and Intranet all the time, even while
wireless presentations are projecting.
AP Client Mode
You can enable the AP-Client Mode function to let the WPG-210N join the existing Access Point through Wi-Fi.
This feature provides the flexibility of wireless network deployment in enterprise environment.
8
PLANET 802.11n Wireless Presentation Gateway
WPG-210N
Remote Desktop
Plug standard USB keyboard or mouse into the USB port on the front panel of the WPG-210N and you can
control your PC remotely. You don’t have to stand still by the side of a PC or the WPG-210N, thus making your
presentation easily and freely.
1.3 Product Features
Wirelessly Project Multimedia with Laptops and Macs
Up to 30fps Network Screen Projection
VGA / 720p HDMI output
4-to-1 Split Screen Projection
Audio / Video Streaming
Plug & Show
802.11n Wi-Fi AP and AP-client mode
Mouse / Keyboard remote operation
Web browser management
Windows XP / Vista / 7 / 8, Mac OS X support
Multiple users access
Compact size for convenient installation and placement
9
PLANET 802.11n Wireless Presentation Gateway
1.4 Product Specifications
Product WPG-210N
Hardware Specifications
Video VGA Port: D-Sub 15-pin female port
HDMI 1.2
Interfaces
LED Indicators Power
Material Metal
Dimensions (W x D x H)160 x 60.3 x 30mm
Weight 312g
Power External Power adaptor 5V DC input 2.6A
Wireless Interface Specifications
Standard Compliance with IEEE 802.11n
Frequency Band 2.412 ~ 2.4835GHz
Wireless Data Rate Up to 300Mbps
Wireless Channel America/ FCC: 2.412~2.462GHz (11 Channels)
Receive Sensitivity 802.11b: 11M -76 dBm
Wireless Security IEEE Standard 64/128 bit WEP / WPA / WPA2-PSK
Operation Mode AP (Access Point)
Video Display
Supported PC / Laptop
Resolution
Supported Output Resolution VGA:
Audio Out 2.5mm stereo jack
LAN 10/100Base-TX RJ-45
Wireless
LAN
Gain 2 x 2dBi RP-SMA detachable antenna Antenna
Orientation Omni-directional
Please follow the instructions below to build the wireless network connection between the WPG-210N, display
equipment and your computers.
2.1 Hardware Description
2.1.1 The Front Panel
The front panel provides a simple interface monitoring the wireless presentation gateway. Figure 2-1 shows
the front panel of WPG-210N.
Front Panel
Figure 2-1 WPG-210N Front Panel
USB Port: USB 2.0 Ports for USB keyboard and mouse.
User can control the projecting PC remotely by simply plugging standard USB keyboard
or mouse into WPG-210N.
2.1.2 LED Indications
The front panel LEDs indicate instant status of system power and help monitor and troubleshoot when needed.
The table below shows the LED indications of the Wireless Present Gateway.
LED (Green) Description
On Power On
Off Power Off
2.1.3 The Rear Panel
Rear Panel
12
PLANET 802.11n Wireless Presentation Gateway
WPG-210N
Figure 2-2 the WPG-210N Rear Panel
2.2 Hardware Connection
Step 1. connect HDMI or D-sub cable of the projector to WPG-210N. Please turn off your projector first, and
Then you can power on WPG-210N.
Figure 2-3 VGA / HDMI interface connection
13
PLANET 802.11n Wireless Presentation Gateway
WPG-210N
Step 2. When the projector shows the default screen as shown below, it indicates WPG-210N is ready now.
Figure 2-4 Projector default screen
Step 3.ss signal of WPG-210N, and connect your Use your laptop or desktop for site surveying the wirele
PC with it wirelessly. The default SSID is WPG-210N.
Figure 2-5 Windows platform wireless site survey
14
PLANET 802.11n Wireless Presentation Gateway
Step 4.10N web page automatically, or you can enter Open the web browser and it will redirect to WPG-2
the default IP address 192.168.1.1 to access it.
WPG-210N
Figure 2-6 WPG-210N Web UI screenshot
Now you can configure the WPG-210N and download the client utility (WPG) of Windows 8/7/Vista/XP or
Windows M
obile 5/6 via web UI. For further information of the configurations, please refer to the following
chapters.
15
Chapter 3. WINDOWS CLIENT UTILITY – WPG
3.1. Starting Program
PLANET 802.11n Wireless Presentation Gateway
WPG-210N
After installing WPG (Wireless Present
lease follow the steps below to start.
p
Step 1. Click WPG icon on the desktop to execute the program.
Step 2. WPG will start to search the available access points automatically if you have not connected your PC
to WPG-210N manually. When the WPG-210N is displayed in the list, please click it to connect and
then enter the Login Code shown on the projector screen.
ation Gateway) utility downloaded from the web page of WPG-210N,
Figure 3-1 WPG Utility – Access Point connection
Figure 3-2 WPG Utility – Access Point Login
16
Step 3. Click the button to start projection
Figure 3-3 WPG Utility – Control Panel
3.2. Control Panel
PLANET 802.11n Wireless Presentation Gateway
WPG-210N
Figure 3-4 WPG Utility – Control Panel function Introduction
Button Description Button Description
Start Full Screen Projection
Project to Split No. 1
Project to Split No. 2
Project to Split No. 3
Please refer to the following sections for detailed instructions of the menu.
Project to Split No. 4
Stop projecting
Freeze The Projection Screen
3.2.1. Show Receiver Information
Click “Show Receiver Information” and it will display the Receiver Information, such as WiFi Name, IP
Address and code on the upper of desktop, it will close automatically after 30 seconds.
17
PLANET 802.11n Wireless Presentation Gateway
WPG-210N
Figure 3-5 WPG Utility – Show Receiver Information
3.2.2. Web Admin
Click “Web Admin” to open the web UI page of WPG-210N. With regard to the web management UI page,
please refer to the next chapter.
Figure 3-6 WPG Utility – Web Admin
3.2.3. Search Receiver Device
Click “Search Receiver Device”, it will disconnect from current receiver and search the receiver again.
18
PLANET 802.11n Wireless Presentation Gateway
WPG-210N
Figure 3-7 WPG Utility –Search Receiver Device
3.2.4. Select Projection Source
Click the “Select Projection Source” then you can select to project the main screen of desktop or the virtual
extended screen.
Object Description
Main Desktop
Extended Desktop
When “Main Desktop” is
desktop screen.
When “Extended Desktop” is selected, WPG-210N will project out the
virtual screen.
The virtual second monitor is invisible, but it is just right of the main one.
Just pull the presentation item out of right side screen, and you’ll see it
appears on the projector screen.
selected, WPG-210N will project out the main
19
PLANET 802.11n Wireless Presentation Gateway
WPG-210N
Figure 3-8 Virtual Extended Screen
For Windows XP system, before starting the Extended Desktop screen projection,
please install the “VDD.exe” (Virtual Display Driver) first on your computer. Please
find the software in the CD-ROM.
For Windows 7/Vista Starter edition, it can’t support extended screen.
3.2.5. Projection Quality
Click the “Projection Quality”, choose “Normal” for faster projection speed with lower screen image quality,
20
Loading...
+ 44 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.