Planet WAP-4060PE User Manual

Table of Contents

Physical Details 1

Front panel 1

Rear panel 2

Hardware Installation 2

General installation 2

PoE installation 3

Configuring the Access Point 3

WAP-4060PE Manager Installation 3

Running WAP-4060PE Manager 4

Further Configuration 5

This page is intentionally left blank

1

Package Content

• WAP-4060PE

• Dipole Antenna

• Quick Installation Guide

• User’s manual CD-ROM

• Power Adapter

 NOTE:

If any of the above items are missing or damaged, contact

your local dealer for support.

Physical Details

Front panel

STATUS On - Error condition.

Off - Normal operation.

Blinking - During start up, and when the Firmware is being up-

graded.

POWER On - Normal operation.

Off - No power

LAN On - The LAN (Ethernet) port is active.

Off - No active connection on the LAN (Ethernet) port.

Flashing - Data is being transmitted or received via the corre-

sponding LAN (Ethernet) port.

WLAN On - Idle

Off - Error- Wireless connection is not available.

Flashing - Data is being transmitted or received via the Wire-

less access point. Data includes "network traffic" as well as user

data.