1. Package Content
Web Smart PoE Injector Hub
RJ-45 / UTP Cable
PC / Workstation
with
IE or Netscape Browser
Thank you for purchasing PLANET 12/24-Port Web Smart
PoE Injector Hub, POE-1200 / POE-1200P2 / POE-2400 /
POE-2400P4. Terms of “PoE Injector Hub” in following
section of this Quick installation guide means the POE-1200
/ POE-1200P2 / POE-2400 / POE-2400P4.
Upon open the box of the PoE Injector Hub and carefully
unpack it. The box should contain the following items:
l The PoE Injector Hub x 1
l This Quick Installation Guide x 1
l User’s manual CD x 1
l Power Cord x 1
l Rubber feet x 4
l Two rack-mounting brackets with attachment screws x 1
If any item is found missing or damaged, please contact
your local reseller for replacement.
2. Requirements
is 192.168.0.100 (the factory-default IP address), then
the manager PC should be set at 192.168.0.x (where x is
a number between 1 and 254, except 100), and the default
subnet mask is 255.255.255.0.
Use Internet Explorer 5.0 or above Web browser, enter
default IP address http://192.168.0.100
To access the Web interface then the Web login screen
appears in Figure 1
Default IP Address: 192.168.0.100
Default Account: admin
Default Password: admin
The following screen based on POE-2400P4,
for POE-1200 / POE-1200P2 / POE-2400 the
display will be the same to POE-2400P4.
The POE-1200 / POE-1200P2 / POE-2400 / POE-2400P4
provide remote Web interface for manage; the following
equipments are necessary for further management.
– 1 – – 3 –
Network cables: Use standard network (UTP) cables with
RJ45 connectors.
Subscriber PC installed with Ethernet NIC (Network Card)
The operate system of subscriber PC that running Windows
98/ME, NT4.0, 2000/XP, MAC OS9 or later, Linux, UNIX or
other platform compatible with TCP/IP protocols.
3. Start Web Management
The PLANET POE-1200 / POE-1200P2 / POE-2400 / POE2400P4 provide a built-in browser interface. You can
manage the PoE Injector Hub remotely by having a remote
host with Web browser, such as Microsoft Internet Explorer,
Netscape Navigator or Mozilla Firefox.
Figure 1. Web Login Screen of POE-2400P4
After entering the user name and password (default user
name and password is “admin”) in login screen (Figure 1
appears). The Web main screen appears as Figure 2.
Figure 2. Web Main Screen of POE-2400P4
Now, you can use the Web management interface to
continue the PoE Injector Hub management, please refer to
the user manual for more.
The following shows how to startup the Web Management
of the PoE Injector Hub, please note the PoE Injector Hub is
congured through an Ethernet connection, make sure the
manager PC must be set on the same IP subnet address,
for example, the default IP address of the PoE Injector Hub
– 2 – – 4 –
For security reason, please change and
memorize the new password after this first
setup.
4. While IP Address be changed or
5. Customer Support
forgotten admin password –
To reset the IP address to the default IP Address
“192.168.0.100” and the user name /password to factory
default mode (default user name and password is admin).
Press the hardware reset button at the front panel about
10 seconds. After the device is rebooted, you can login
the management Web interface within the same subnet of
192.168.0.xx and default user name / password.
Hardware Reset button
Thank you for purchase PLANET products. You can browse
our online FAQ resource at the PLANET Web site rst to
check if it could solve you issue. If you need more support
information, please contact PLANET switch support team.
PLANET online FAQ :
http://www.planet.com.tw/en/support/faq.php?type=2
Switch support team mail address :
support_switch@planet.com.tw
Copyright © PLANET Technology Corp. 2009.
Contents subject to revision without prior notice.
PLANET is a registered trademark of PLANET Technology
Corp. All other trademarks belong to their respective
owners.
– 5 – – 6 –