Contents are subject to revision without prior notice.
PLANET is a registered trademark of PLANET Technology Corp. All other trademarks belong to their
respective owners.
Disclaimer
PLANET Technology does not warrant that the hardware will work properly in all environments and
applications, and makes no warranty and representation, either implied or expressed, with respect to the
quality, performance, merchantability, or tness for a particular purpose.
PLANET has made every eort to ensure that this User ’s Manual is accurate; PLANET disclaims liability
for any inaccuracies or omissions that may have occurred.
Information in this User’s Manual is subject to change without notice and does not represent a
commitment on the part of PLANET. PLANET assumes no responsibility for any inaccu-racies that
may be contained in this User’s Manual. PLANET makes no commitment to update or keep current the
information in this User’s Manual, and reserves the right to make improvements to this User’s Manual
- 2 -
and/or to the products de-scribed in this User’s Manual, at any time without notice.
If you nd information in this manual that is incorrect, misleading, or incomplete, we would appreciate
your comments and sugges-tions.
FCC NOTICE (Class B)
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and (2) this device must accept any interference
received, including interference that may cause un-desired operation.
CE Mark Warning
Operation of this equipment in a residential environment could cause radio interference.
- 3 -
WEEE Warning
To avoid the potential eects on the environment and human health as a result of the
presence of hazardous substances in electrical and electronic equipment, end users of
electrical and electronic equipment should understand the meaning of the crossed-out
wheeled bin symbol. Do not dispose of WEEE as unsorted municipal waste and have to
collect such WEEE separately.
Revision
User's Manual of PLANET SFP/SFP+ Mini-GBIC Transceiver
3. Introduction and Model List ....................................................................................................................... 8
3-1 The MFB-Series Mini-GBIC Transceiver Module List .......................................................................8
3-2 The MGB-Series Mini-GBIC Transceiver Module List ....................................................................12
3-3 The MTB-Series Mini-GBIC Transceiver Module List .....................................................................17
4. Installation and Removal of Transceiver Module ...................................................................................20
4-1 Installing the SFP/SFP+ Mini-GBIC Transceiver Module ...............................................................20
4-2 Removing the SFP/SFP+ Transceiver Module ...............................................................................21
4-3 Connecting the UTP Cable ..............................................................................................................21
Appendix A .....................................................................................................................................................23
Thank you for purchasing PLANET SFP/SFP+ Mini-GBIC Transceiver which includes the Ethernet
module of the MFB, MGB and MTB families.
The MFB family’s Fast Ethernet SFP module can be installed into PLANET Switch products with
100BASE-FX SFP interface. The distance can be extended from 2km (multi-mode, LC) to up to 120km
(sin-gle-mode, LC).
The MGB family’s Gigabit Ethernet SFP module can be installed into PLANET Switch products with
1000BASE-SX/LX SFP interface. The dis-tance can be extended from 100m (TP) and 2km (multi-mode,
LC) to up to 120km (single-mode, LC).
The MTB family’s 10G Ethernet SFP+ module can be installed into PLAN-ET products with 10G SFP+
interface. The SFP+ transceivers can be ex-tended from a distance of 300m (multi-mode, LC) to up to
60km (sin-gle-mode, LC). The deployment distance of 10G can be extended to 30 meters.
- 6 -
2. Checklist
Your SFP/SFP+ Package should contain the following items:
z The SFP/SFP+ Transceiver Module x 1
z The User’s Manual x 1
If any item is missing or damaged, please consult the dealer from whom you purchased your SFP/SFP+
Mini-GBIC Ethernet transceiver module.
- 7 -
3. Introduction and Model List
3-1 The MFB-Series Mini-GBIC Transceiver Module List