2. Physical Installation
LAN
Power ON/OFF Button
Quick Installation Guide
FRT-415N
300Mbps 802.11n Wireless
Internet Fiber Router
1. Package Contents
Thank you for choosing PLANET FRT-415N. Before installing the AP,
please verify the contents inside the package box.
FRT-415N
Note
Quick Guide
If there is any item missing or damaged, please contact
the seller immediately.
Ethernet Cable Power Adapter
Front Panel of FRT-415N
Power WPS
Rear Panel of FRT-415N
Power Connecter
(12V DC Input)
Internet
LANWAN
WLAN
5dBi Antenna
WAN
– 1 – – 2 –
3. Hardware Installation
Step 1. Locate the FRT-415N in an optimum place, and adjust the
antenna for the best coverage.
Step 2. Follow the figure below to connect the WAN port.
Step 3. Follow the figure below to connect the network devices.
Internet
100BASE-FX
Fiber Optic
(DHCP Client or 192.168.1.2)
Step 4. Connect the Power Adapter to the FRT-415N. Check whether
PC
the PWR LED and LAN LED on the front panel are on
accordingly.
Data IPTV
Entertainment
100BASE-FX
SFP Transceiver
100BASE-FX
LC Fiber
– 3 – – 4 –
Power Adapter
Applications
4. Web Login
Point-to-Point Fiber Bridge
Core Switch
Media Converter
100
100Mbps
UPLOAD
100Mbps
100
DOWNLOAD
2~60 km
Point-to-Multipoint Fiber Router
Gigabit Fiber
Uplink
100
100
Layer3 Fiber Switch
2~60 km
FRT-415N
Fiber Wireless
Router
FRT-415N
Fiber Wireless Router
FRT-415N
Fiber Wireless Router
100
N
N
Smart Pad
N
PC
100BASE-TX UTP
100BASE-FX Fiber-optic
2.4GHz 802.11n
Step 1. Connect the FRT-415N with your PC over an Ethernet cable
which is plugged into LAN port. Power on the FRT-415N
using the power adapter.
Step 2. Set your computer to get an IP address from the Wireless
Router:
1. Click the “Start” button located at the lower-left corner of your
computer.
2. Click “Control Panel”.
3. Double-click the “Network and Sharing Center” icon.
4. Click “Change Adapter Settings”.
5. Double-click “Local Area Connection”.
6. Select “Internet Protocol Version 4 (TCP/IPv4)” and click
“Properties”.
7. Select “Obtain an IP Address automatically” and “Obtain
DNS Server Address automatically”, and then click the “OK”
button twice to save the configuration.
– 5 – – 6 –
5. Enter into the Web Management
Default IP Address: 192.168.1.1
Default User Name: admin
Default Password: admin
Default SSID: PLANET_XXXX
(“X” means the last 4 digits of the MAC address.)
Step 1. The Web management allows you to access and manage the
Wireless Router easily. Launch the Web browser and enter
the default IP address http://192.168.1.1
Step 2. When the login window pops up, please enter the User
Name and Password. The default User Name and Password
are both “admin”. Then click the OK button to continue.
Step 3. Now, you can see the Web management UI of the FRT-415N.
Please go to the Wireless Settings page to configure your
wireless network. For security reasons, configuring the
Encryption Method and Passphrase of your wireless network
is strongly recommended.
FURTHER INFORMATION:
The above steps introduce simple installations and configurations for the
FRT-415N. For further configurations of LAN, Wireless, Access Control,
etc, please refer to the user manual, which can be downloaded from the
website.
http://www.planet.com.tw/en/support/download.php?type1=66&model
=48766&type=3
If you have further questions, please contact the local dealer or
distributor where you purchased this product.
– 7 – – 8 –
2011-B53080-000
Loading...