1
ENW-3502
10Mbps Ethernet PC Card
Installation Guide
Windows 95/98/NT
1
Contents
This package should include the following items:
Ø PCMCIA Type II Ethernet Card
Ø One Coupler (with RJ-45 connector )
Ø Manual & Driver Diskette
Ø This Installation Guide
System Requirement
Ø PC with 386SX CPU or above
Ø At least one PCMCIA release 2.1 or later Type II socket
Ø 4MB DRAM
Ø Operating system like: MS-DOS / Windows 95 / Windows 98 /
Windows NT 3.5,4.0 / Windows for Workgroup / LAN Manager
About This Guide
Thank you for purchasing PLANET ENW-3502-T, Ethernet PC Card.
This Guide illustrates the installation procedure for your Windows 95, 98 or
Windows NT laptop. Please refer to the section according to the OS of your
laptop.
If you are planning to install the OS not in this guide, please refer to the diskette.
In the “Manual” directory, it contains the document that could help for your
installation.
Windows 95
1. Insert the ENW-3502-T Ethernet
PC Card into an open PCMCIA
slot on your notebook.
2. After Windows 95 detects the card,
the Update Device Driver Wizard
window, as shown in figure, will
appear. Insert the driver diskette
and click Next to continue the
installation.
3. When Windows 95 finds the
installation file in Driver
Diskette and shows the
following window on your
screen, click Finish.
4. Windows 95 will follow the
direction of the installation
file to locate the files that
should be copied. Eventually
Windows 95 may need to copy required system files. Give the correct path,
then click OK to continue.
5. After all files have been copied, Windows 95 will prompt you to restart the
system. Click Yes to complete installation.
Windows 98
1. Insert the ENW-3502-T Ethernet PC Card into an open PCMCIA slot on your
notebook.
2. After Windows 98 detects the
ENW-3502-T Ethernet PC
Card, the Add New Hardware
Wizard window, as shown in
figure, will appear. Click Next
to continue the installation.
3. Select Search for the best
driver for your device.
[Recommended] and click Next.
4. Uncheck the Microsoft Windows
Update. Let Windows 98 search
floppy drive. Then place the
floppy driver disk and click Next
to continue.
2
3
5. Select the found updated
driver, The “ENW-3502-T
Ethernet PC Card”, then
click Next.
6. After copying all required
files, Windows 98 will
prompt you to restart the
system. Click Yes to complete
installation.
Windows NT 4.0
The installation procedure assumes the network component has been installed on
your computer. To check whether the network component has been installed,
double click the Network icon in Control Panel. If it has not, refer to the
Windows NT 4.0 installation guide to install the component.
While installing the network component, Windows NT 4.0 will ask you to install
the driver of network adapter. The driver installation procedure is similar to the
following one.
Follow the steps below to install the driver.
1. Insert the ENW-3502-T Ethernet PC Card into an open PCMCIA slot on your
notebook. Login to NT 4.0 as the administrator.
2. Doublic click Network icon in Control
Panel, and select Adapters tab, the figure
displayed.
3. Click Add to add a new adapter, the window
will popped up.
4. Click Have Disk …, after Insert Disk window, the screen shown as below ,
popped up, give the search path, A:\WINNT (suppose A: is your floppy
drive), then insert driver diskette, and click OK.
5. After finding the installation file, the Select OEM Option window shown in
figure below is displayed. Click OK to choose the ENW-3502-T Ethernet
PC Card option.
4
5
6. In the ENW-3502-T Ethernet PC
Card setup window, select the desired
IRQ level and I/O Port address. After
selecting desired configuration, click
OK to continue.
7. Select the PCMCIA type option as
figure in the left and click OK to
continue.
8. Click Close to close the Network
window, and let Windows NT 4.0 binding the adapter with network
component.
9. Eventually, Windows NT 4.0 will prompt you to restart the computer, click
Yes to finish installation.
Other Operating Systems
Please check the detailed installation procedure from the User’
driver diskette.
Loading...