DVR-462 DVR-462
their respectiveowners. Copyright © 2010 PLANET Technology Corp. All rights reserved.
PLANET Technology Corporation
11F, No. 96, Min Chuan Road, Hsin Tien, Taipei, Taiwan, R.O.C.
Tel: 886-2-2219-9518 Fax: 886-2-2219-9528
Email: support@planet.com.tw www.planet.com.tw
► Contents ► Hardware Connection
Power Adapter
CD Disk
Remote Control
Battery x 2
SATA cable
► Hard Disk Installation
Note: Before HDD installation, please make sure there is no pre- configured par tition in this HDD.
If yes, please delete all the partition before install.
STEP 1: Remove the 3 screws from DVR-462
STEP 2: Follow the direction to remove the
upper case
Quick Installation GuideDVR- 462
HDD Screw x 4
STEP 3: Place the HDD on the HDD plate of the
removed case and connect the power
and the SATA cable
STEP 4: Put back the upper case and tight the
three screws
their respectiveowners. Copyright © 2010 PLANET Technology Corp. All rights reserved.
PLANET Technology Corporation
11F, No. 96, Min Chuan Road, Hsin Tien, Taipei, Taiwan, R.O.C.
Tel: 886-2-2219-9518 Fax: 886-2-2219-9528
Email: support@planet.com.tw www.planet.com.tw
Main Monitor Output Camera 1~4 Mouse
Audio Input VGA Output
(Option)
CAUTION !
RISK OF ELECTRIC SHOCK
DO NOT OPEN
WARNING
TO REDUCE THE RISK OF
FIRE OR ELECTRIC SHOCK
DC IN 12V
SPOT
MAIN
VIDEO IN
1
2
3
4
AUDIO
IN
OUT
NTSC/PAL Switch
PowerSupply
Spot Monitor Output Audio Output RS485/Relay/Sensor
Please follow the sequence from 1 to 11 to connect the equipments to DVR-462.
Item
1
2
3
MAIN MONITOR
VGA
VIDEO IN
BNC port for the main monitor connected.
Connect your PC monitor to this connector. If the MAIN port is connected, VGA port will lost function.
You have to choose the VGA or MAIN for monitoring.
BNC input ports for cameras, 4 in total.
VGA
NTSC/PAL
LAN
Network Connection
Description
485
RELAY G SENSOR
-
+
NO
D
D
CM
USB
2
341
G
NC
4
5
6
7
8
9
10
11
AUDIO IN
NTSC/PAL SWITCH
LAN
EXTERNAL I/O
USB
AUDIO OUT
SPOT MONITOR
DC 12V
For detailed information about DVR-462, please refer to the User’s Manual in the CD disk.
Quick GuideQuick Guide
2011-AB5390-000
RCA input port for an audio signal.
Switch between NTSC and PAL format. Please adjust this switch before power on.
Network port. Connect to your switch or PC directly.
EXTERNAL I/O port (see below for pin definition)
Connect your USB mouse to control this DVR.
RCA output port for an audio signal.
BNC port to display full screen image of all installed cameras in sequence.
Socket for a DC 12V power input.