Pitney Bowes AR-S11 Operation Manual
Be sure to become thoroughly familiar with this manual to gain
the maximum benefit from the product.
Before installing this product, be sure to read the installation
requirements and cautions sections of the "Operation manual for
general information and copier operation".
Be sure to keep all operation manuals handy for reference
including this manual, the "Operation manual for general
information and copier operation" and operation manuals for any
optional equipment which has been installed.
MODEL
AR-S11
Page
• MAIN FEATURES OF THE
AR-S11
• PART NAMES
• SPECIFICATIONS
• METHODS OF SORTING
COPIES
•
SELECTING THE MODE OF
THE 20-BIN SORTER
• USING THE 20-BIN
SORTER
• MISFEED IN THE 20-BIN
SORTER
• FOR KEY OPERATORS
2
2
2
3
4
5
6
7
20-BIN SORTER
OPERATION MANUAL
MAIN FEATURES OF THE AR-S11
Sort bins
Copies are delivered to
these bins.
Sorter release button (See page 6)
If a misfeed occurs in the 20-bin sorter,
press this button to open the space
between the sorter and the machine.
The 20-bin sorter allows you to sort copies into collated sets (sort mode), or group them by original page.
When installed on an AR-C260 Series machine, sets of up to 20 full-color copies can be made in sort mode.
PART NAMES
CAUTIONS
● Do not put pressure on the sorter or subject it to undue force (particularly the sort bins).
● Do not place your hands on the sorter during copying because the sorter moves up and down.
NOTES
● To install the 20-bin sorter, a duplex bypass/inverter unit and either a stand/1 x 500 sheet paper drawer, a stand/
3 x 500 sheet paper drawer, or a duplex module/2 x 500 sheet paper drawer must also be installed.
● In printer mode, output is only possible to the top bin.
SPECIFICATIONS
Name 20-BIN SORTER AR-S11
Number of bins 20
Paper output
Bin capacity See the next page.
Paper size
Paper weight
Power supply Supplied from machine (Stand/paper drawer)
Dimensions 20-7/16" (W) x 21-15/32" (D) x 32-19/64" (H) (519 mm (W) x 545 mm (D) x 820 mm (H))
Weight * Approximately 61.8 lbs. (28kg) *without mounting kit
Face down output (however, face up output in non-sort mode when using paper other
than plain paper or heavy paper 1 (paper weight: 28+ to 54 lbs. or 106 to 200 g/m
Non sort mode: Max. 12" x 18" (A3W)
Sort and group mode: Max. 11" x 17" (A3)
Non sort mode: 17 to 80 lbs. (64 to 300 g/m
Sort and group mode: 17 to 28 lbs. (64 to 105 g/m
2
))
Min. 7-1/4" x 10-1/2"R (A5)
Min. 8-1/2" x 5-1/2" (A5)
2
) (Plain paper and special paper
that can be fed according to the paper feeding specifications of
the machine.)
two sheets of Heavy Paper 1 (paper weight: 28+ to 54 lbs. or
106 to 200 g/m
2
) can be held in each bin in COVERS mode.)
2
) (Plain paper only; however, up to
2
SPECIFICATIONS
SORTER CAPACITY
Bin 1 bin 1 bin to 20 bins
Mode Non sort Sort Group
17 to 21
Paper weight
12" x 18", A3W 60 sheets 60 sheets 10 sheets No No No No No
11" x17", 8-1/2" x 14",
8-1/2" x 13", A3, B4
8-1/2" x 11", 8-1/2" x 11"R,
A4, A4R, B5R
Paper size
8-1/2" x 5-1/2", B5, A5 100 sheets 100 sheets 10 sheets
7-1/4" x 10-1/2"R 100 sheets 100 sheets 10 sheets No No No No No
*1
The indicated number of sheets is the number that can be held in one bin, and is also the maximum number of original pages that
can be copied at once in sort mode. (See the note on page 5, "Maximum number of original pages")
*2 The indicated number of sheets is the number that can be held in one bin, and is also the maximum number of copies that can
be set in group mode. (See the note on page
*3 Up to two sheets can be held in each bin when used as a cover in COVERS mode.
lbs. (64 to
80 g/m
60 sheets 60 sheets 10 sheets
100 sheets 100 sheets 10 sheets
2
)
21+ to 28
lbs. (81 to
105 g/m2)
5
, "
28+ to 80
lbs. (106 to
300 g/m2)
Maximum number of copies that can be set
17 to 21
lbs. (64 to
80 g/m2)
25 sheets*125 sheets*
50 sheets*150 sheets*
50 sheets*150 sheets*
21+ to 28
lbs. (81 to
105 g/m2)
28+ to 54
lbs. (106 to
200 g/m2)
1
1
1
No*
No*
No*
".)
3
3
3
17 to 28
lbs. (64 to
105 g/m2)
25 sheets*
30 sheets*
30 sheets*
28+ to 54
lbs. (106 to
200 g/m2)
2
No
2
No
2
No
NOTES
● When copying in COVERS mode, take care that the number of copies in one set, including covers, does not
exceed the maximum number of sheets that can be held in one bin as indicated above.
● Copying normally stops when the number of sheets in each bin reaches the limit. This can be disabled with the
"OVERRIDE SORTER BIN CAPACITY LIMIT" key operator program (page 7), allowing copying to continue
even if the limit is exceeded. Note, however, that this may result in misfeeds or copies overflowing from the bin.
● If the [INTERRUPT] key is touched during copying in sort mode or group mode (one-sided copying only), the
mode will automatically switch to non-sort mode. The mode will switch back to the previous mode when the
[INTERRUPT] key is touched once again to exit the interrupt state. (Interrupt is not possible during automatic
two-sided copying (one-sided to two-sided or two-sided to two-sided)).
● When color copying is performed, much toner may be put on copy paper depending on the image. In this case,
the copies may be curled.
METHODS OF SORTING COPIES
The 20-bin sorter has the following three modes.
● In the diagrams, 5 copies each are made of originals 1, 2, and 3 in each of the modes.
■■■■ Sort mode
One set of copies is sorted into each bin.
■■■■ Group mode
One set of copies grouped by original page is delivered
to each bin. The copies are output face down.
Original
5 sets of copies
(The copies are output face down in each bin.)
Original
5 copies per page
(The copies are output face down in each bin.)
■■■■ Non sort mode
All copies are delivered to the top bin (unsorted).
Plain paper and Heavy Paper 1 (paper weight: 28+ to 54 lbs. or 106 to 200 g/m
paper types are output face up.
NOTE
Output to the 20-bin sorter in sort mode and group mode is only possible when the machine is in Copy mode.
2
) are output face down. All other
3
Loading...