Pitco Frialator PCF14 General Manual
p
Model PCF14 and PCF18
Crisp N’ Hold Food Cabinet
Station
(Forced Hot Air Holding System)
Project_________________________
Item No.________________________
Quantity________________________
APPLICATION
The Crisp N’ Hold Food Station extends
the holding time of fried food by
maintaining a constant flow of heated air
in and around the product. The air is
filtered, re-circulated and incrementally
heated to control the accumulation of
moisture, conserve energy and keep food
warm and crisp.
STANDARD SPECIFICATIONS
Model PCF14 and PCF18 Cris
PCF18
PCF14
STANDARD FEATURES
Product Dividers – PCF14 - Qty 1
PCF18 - Qty 2
Collection pan pulls out for cleaning
9” (22.9cm) adjustable legs, easier
access to clean
Bottom Shelf
Digital temperature control behind door
CONSTRUCTION
Pan area allows for holding and
draining of finished product.
Food Grate easily lifts out for cleaning.
Bottom Shelf provides ample storage
for breading, batter, food utensils, etc.
*Bottom Shelf is not provided when a filter
pump or flush hose is located inside the dump
station.
Stainless steel front, sides, door and
splash back.
Stainless steel Food Bay.
Heavy Duty 3/16” (.48 cm) door hinge.
Designed to match existing or
accompanying Solstice fryers.
Unit can be installed on either side or
between solstice fryer(s).
HEATING SYSTEM
Provides a stream of constant circulation
of warm air to maintain crispy food,
serving temperatures, and extend holding
times.
N’ Hold Food Cabinet Station
OPERATIONS
Easily integrates into existing Solstice
fryer combinations to provide a
comfortable work area or food preparation
station.
Removable Filter traps oils & are
Dishwasher safe
Pitco Frialator, Inc • P.O. Box 501, Concord, NH 03302-0501 • 509 Route 3A, Bow, NH 03304
603-225-6684 • FAX: 603-225-8497 • www.pitco.com
L10-346 Rev 1 05/10 Printed in the USA
AVAILABLE OPTIONS & ACCESSORIES
(at additional cost)
9” (22.9cm) Casters
Model PCF14 and PCF18 Crisp N’ Hold Food Cabinet Station
SHORT FORM SPECIFICATION
Model PCF14 and PCF18 Crisp N’ Hold Food Cabinet Station
Specify model number of fryers desired and placement of dump station.
PCF14 or PCF18 model number indicates dump station for use with gas/electric cooking systems only.
For use with Solstice gas/electric fryers.
Provide Pitco Model PCF14 or PCF18 Crisp N' Hold Crispy Food Station. Unit shall be a one piece
cabinet to match the dimensions of existing or new SG/SE Gas/Electric equipment. Crisp N' Hold Crispy
Food Station shall be supplied with a collection pan, food grate and bottom shelf.
PCF14 or PCF18
Provide a warming and holding area for finished products. Capable of heating to 190°F (88°C). Preheat
to 190°F (88°C) in approximately 10 minutes.
SHIPPING INFORMATION (Approximate)
Model Shipping Weight Shipping H x W x L Shipping Cube
PCF14
PCF18
Pitco Frialator, Inc • P.O. Box 501, Concord, NH 03302-0501 • 509 Route 3A, Bow, NH 03304
603-225-6684 • FAX: 603-225-8497 www.pitco.com
We reserve the right to change specifications without notice and without incurring any obligation for equipment previously or subsequently sold.
ORDERING INFORMATION
SHORT FORM SPECIFICATION
ELECTRICAL
120 Volts 1820 watts, 15.1 amps, 60 hz single phase
TYPICAL APPLICATION
150.0 lb
(68.0 kg)
175.0 lb
(79.4 kg)
45.0 x 19.0 x 36.0 in
(114.3 x 48.3 x 91.4 cm)
45 x 23 x 38 in
( 88.9 x 58.4 x 96.5 cm)
L10-346 Rev 1 05/10 Printed in the USA
17.8 ft³
(0.5 m³)
22.8 ft³
(0.6 m³)
Loading...