Pitco Frialator FD General Manual

Project

Item No.

Model FD Solstice Filter Drawer

Filter Drawer (FD) and System Solstice Models

STANDARD ACCESSORIES

 Filter powder and fryer cleaner sample packets  Filter paper envelope 18-1/2” x 20-1/2” (47 cm x 57 cm)

sample packet - 25 sheets

 Cleaning brush  Fryer scoop  Filter scoop

STANDARD COMBINATIONS

Any combination of models SG14, SG14R, SG14T, SG18 and BNB are available. Refer to fryer specification sheets for options and other technical information. Additional filters may be needed for larger systems.

Quantity

STANDARD SPECIFICATIONS

CONSTRUCTION

 Filter pan guide assembly are construction of polished stainless steel.  Welded heavy-duty stainless steel filter pan mounted on

two rigid casters for easy pan alignment and removal.

 1/3 HP heavy duty motor and pump assembly.  Large filter media area for filtering heavily breaded

products.

 Special design pan stabilizer legs allow for ease of

movement over rubber mats.

OPERATIONS

 Simple two-step operation:

1. Blue handle valve is opened to drain oil into filter pan.

2. Red handle valve is opened to return oil from filter to fryer.  Self-aligning filter piping makes it easy to assemble and disassemble.  Larger 3” (7.6 cm) drain line allows for faster draining

without clogging.

 Light-weight, removable filter pickup assembly, with

built-in handle, for fast media cleaning under busy conditions.

 High flow pump and large return lines produce faster oil

refill times.

 Large filter media collects more debris, which extends

time between changes.

 Filter pan lid attaches to cabinet for ease of use.  Filter system can handle longer oil polishing duty cycles.  All filter assembly parts are self-integrated. There are

no loose parts to be misplaced.

 Large curved down spout drain virtually eliminates

splashing and swivels for oil disposal.

NOTE: Up to 6 models per filter. Standard filter location is on the left. Many other combinations are available. Call your dealer/distributor for more details.

OPTIONS & ACCESSORIES AT ADDITIONAL COST

 Flush hose  Fryer brush  Filter paper envelope 18-1/2” x 20-1/2” (47 cm x 57 cm);

100

sheets per package

 Paperless stainless steel mesh filter  Filter heater for solid shortneing  Filter scoop  Filter powder

Pitco Frialator, Inc., P.O. Box 501, Concord, NH 03302-0501 •1509 Route 3A, Bow NH 03304, USA

(603) 225-6684 • Fax (603) 225-8472 • www.pitco.com

L10-134 Rev 4 (02/07)

APPROVALS

 CSA Certified (AGA, CGA)

 NSF Listed  MEA Approved  CE Certified  Australian Gas Assoc.

Certified (AuGA)

Patent Pending

2514L3

Filter Drawer (FD) and System Solstice Models

OPTIONAL

INTEGRAL

30 [76.2]

8R7069

2514L3

8R7069

MINIMUM AISLE SPACE

REQUIRED TO REMOVE

FILTER PAN

5/8 [1.6]

FLUE DEFLECTOR

34 3/8 [87.3]

BASKET LIFT

11/16 [1.7]

46 1/8 [117.2]

INCHES [CENTIMETERS]

1. 6 FOOT (183 CM) POWER SUPPLY CORD SUPPLIED WITH UPGRADED CONTROLS

2. 6 FOOT (183 CM) POWER SUPPLY CORD SUPPLIED WITH FILTER SYSTEM

(NEMA 5-15 PLUG ON 115VACUNITS ONLY)

34 [86.4]

NOM.

12 [30.5]

NOM.

Model FD Solstice Filter Drawer

9 [22.9]

NOM.

21 29/32 [55.6]

10 ½ [26.7]

1 5/16 [3.3]

4 3/8 [11.1]

REAR TEE GAS CONNECTION

GAS REQUIREMENTS

Gas Rear Tee Manifold

SG14S, SG14RS, SG14TS, SG18S,

SGBNB14, SGBNB18

Gas Type Store Manifol d Pressure* Burner Manifo ld Pressure *Recommended Minimum

Natural Gas 7” W.C. / 17.4 mbars / 1.75 kPa 4” W.C. / 10 mb ars / 1 kPa

L.P. Gas 13” W.C . / 32.4 m bars / 3.25 kPa 10” W.C. / 25 mbars / 2.5 kPa

Clearance Information Fryer Front

All Models 30” (76.2 cm) minimum 6” (15.2 cm)

Maximum Number of

Fryer Positions Per Manifold Rear Tee Gas Connection Lo cation Gas Connecti on Size

4 fryer posi tions allo wed;

include BN B unit in position count.

Default location is to the left. Connection

is field reversible to the right.

1-¼” NPT (1-¼” BSP CE AuGA) for 367 KB TU / 108 kW / 387 mJ

1 “ NPT (1” BSP CE, AuGA) up to 366 kBTU / 107 kW / 386 mJ.

” NPT (¾” BSP CE, AuGA) for single units.

to 560 KBT U / 164 kW / 591 mJ.

Check plumbing/gas codes for proper gas supply line sizing.

Fryer Side s, Rear, Bottom

to any combustible material Fryer Flue Area

Do not Curb Mount

Do not block or restric t the flue gas ses from flowing into ventilation system.

ELECTRICAL REQUIREMENTS

Filter

Fryer

Options Voltage / Phase / Frequenc y Amps Additional Am ps for

8.0 GPM (30.3 LPM) 1/3 HP 115 / 1 / 60 7 3

6.7 GPM (25.4 LPM) 1/3 HP 220-230-240 / 1 / 50 3.6 1.5 Millivolt controls Not required 0 N/A 0 No power cord

Upgrade controls: Solid state, Digital, Computer, Basket Lift

115 / 1 / 60 1.7 N/A

220-230-240 / 1 / 50 0.9 N/A

Filter Heater

Number

of Power C ords

Power

Cord Locations

At filter location

1 cord per 4 fryers Default is left

GAS REQUIREMENTS

Models “A” Dim Cook Area

SG14

SG14R

SG14T

SG18

SGBNB14

SGBNB18

15-5/8 in

39.7 cm

15-5/8 in

39.7 cm

15-5/8 in

39.7 cm

19-5/8 in

49.8 cm

15-5/8 in

39.7 cm

19-5/8 in

49.8 cm

14 x 14 x 4 in

35.6 x 35.6 x 10.2 cm

14 x 14 x 4 in

35.6 x 35.6 x 10.2 cm

7 x 14 x 4 in/tank

17.8 x 35.6 x 10.2 cm/tank

18 x 18 x 4 ~ 4 ¾ in

45.7 x 45.7 x 10.2 ~12.1 cm

14 ½ x 24 ½ x 4-5/8 in

36.8 x 62.2 x 11.9 cm

18 ½ x 24 ½ x 4-5/8 in

47 x 62.2 x 11.9 cm N/A N/A

Filter N/A N/A

Oil

Capacity

40 - 50 lbs 18 – 23 kg

20-25 lbs/tank

9-11.5 kg/tank

70-90 lbs 32–41 kg

33 kW (CE) / 119 mJ (AuGA)

36 kW (CE) / 129 mJ (AuGA)

15 kW (CE) / 50 mJ (AuGA)/ tank

40 kW (CE) / 145 mJ ((AuGA)

N/A

95 lbs 43 kg N/A

Gas

Input / Hour

110,000 BTU

122,000 BTU

50,000 BTU/tank

140,000 BTU

N/A

Shipping

Weight / Unit

200 lbs

91 kg

208 lbs

94 kg

230 lbs

104 kg

226 lbs

103 kg

130 lbs

59 kg

150 lbs

68 kg

125 lbs / 57 kg

Add 20 lbs (9

kg) per fryer

position

Shipping

Cube

33 ft.

.93 m

33 ft.

.93 m

33 ft.

.93 m

33 ft.³

.93 m

33 ft.

.93 m

33 ft.

.93 m

N/A

Ships with

fryer

Shipping Dimensions

H x W x L

58 x 22 ½ x 43 ½ in

147.3 x 57.2 x 110.5 cm

58 x 22 ½ x 43 ½ in

147.3 x 57.2 x 110.5 cm

58 x 22 ½ x 43 ½ in

147.3 x 57.2 x 110.5 cm

58 x 22 ½ x 43 ½ in

147.3 x 57.2 x 110.5 cm

58 x 22 ½ x 43 ½ in

147.3 x 57.2 x 110.5 cm

58 x 22 ½ x 43 ½ in

147.3 x 57.2 x 110.5 cm

N/A

SHORT FORM SPECIFICATION

Provide Pitco FD (Filter Drawer) Solstice filter system. Drain line shall be 3” (7.6 cm) diameter with a swivel drain spout for oil disposal. Filter pickup assembly shall have handles and utilize envelope type filter paper with 500 sq. inches (3,226 sq. cm) of filter area. Filter pump shall pump 8 GPM, 60 Hz (25.4 LPM, 50 Hz). Filter piping to be self-aligning for easy assem bly. Filter lid shall be attached t o the cabinet for ease of use. Filte r pan shall have front s tabilizer l egs and re ar rigid c asters for portabilit y. Provide ac cessories as follows:

TYPICAL APPLICATIONS

Space saving filter capable of filtering heavy to light breaded products fast and conveniently.

Pitco Frialator, Inc., P.O. Box 501, Concord, NH 03302-0501 •1509 Route 3A, Bow NH 03304, USA (603) 225-6684 • Fax (603) 225-8472 • www.pitco.com L10-134 Rev 4 (02/07) Printed in the USA

We reserve the right to change specifications without notice and without incurring any obligation for equipment previously or subsequently sold.