Pitco SE14RS User Manual
Filtering Couldn’t Be Easier
Filtering Couldn’t Be Easier
With a 3” drain line, 8 gallon per minute oil pump, and
simple two step filter process, what could be easier?
Step #1
Pull the blue handle to
drain the fryer.
Step #2
Pull the red handle to open the oil return valve and
activate the pump in one easy step.
Solstice Series
Gas and Electric Fryers
Internal
strainer to
prevent pump
clogs.
Fewer filter parts
(only 4 including the pan)
The Solstice Filter System is available on two or more fryers, or the Solstice
SoloFilter can be put on a single gas or electric fryer
For More Information Contact:
P.O. Box 501, Concord, NH 03302-0501
509 Route 3A, Bow, NH 03304, USA
(800) 258-3708 • (603) 225-6684 • FAX (603) 225-8472 • www.pitco.com
L12-050 Rev 2 (04/03)
Extra Large 3” drain
manifold and spout provide
fast draining for faster turn
Clog free
around times.
Our self aligning
Quick Guide pan
has no rack or
rollers to worry
about.
Any Combination, Any Fuel
Singles Or Mix And Match To Create Your Own Fryer System
SG14/SE14
SG14T/SE14T
SG18/SE18
Solstice Gas Fryers
Solstice Gas Fryers
Solstice Electric Fryers
Solstice Electric Fryers
High Production, 57% Thermal Efficient Solstice Burner Design
The solstice burner draws more primary air for improved air gas mixture.
The baffle design causes a scrubbing action of the flame, squeezing
more heat out. This new design causes the baffle to get into radiant
mode quicker for improved temperature recovery and faster
cooking. The Solstice Gas models are available
in 110,000BTU, 122,000BTU and 140,000BTU.
Matchless Ignition*
Ignites a standing pilot once a each day when the power is turned on. Less wear
and tear on components and faster recovery when the fryer calls for heat.
Universal Control Harness*
Mix and match controls to fit your needs. Intellifry computer, Digital Control,
Solid State, or use the Solid State control as a back-up to the Intellifry or
Digital.
Mix and Match Cabinets
Any Solstice Gas models can be combined to create the perfect combination of
SG14, SG14R, SG14T or SG18 for your individual needs.
Front Serviceable
All components are accessible from the front to make service and maintenance
faster and easier.
Solid State Control Standard
Every Solstice Electric fryer comes standard with Solid State control behind the
front door.
Universal Control Harness
Mix and match controls to fit your needs. Intellifry computer, Digital Control,
Solid State, or use the Solid State control as a back-up to the Intellifry or Digital.
Mix and Match Cabinets
Any Solstice Electric models can be
combined to create the perfect
combination of SE14, SE14T or SE18
for your individual needs.
Safe Fixed Element Design
Solstice Electric fryers are designed
with a fixed element design to
eliminate oil migration through
pivot components. This new design
also creates a safer working
environment by keeping the hot
elements in the tank where they
belong. Models are available in
17kW and 22kW designs.
*Available with upgraded controls. millivolt thermostat standard on Solstice Gas Fyers
How can Pitco offer a 10 year warranty on its stainless steel tanks?
Pitco’s tube fired fryers require
no extra insulation on the outside
of the tank, making them easier
to service and eliminating the
chance of capturing grease.
Pitco’s large cool zone
minimizes costly oil
breakdowns, carbonization,
and taste transfer
Pitco fry tanks are
completely pressure-
blasted to clean and
relieve stress at weld
points, while smoothing
surfaces for easier
cleaning.
Pitco’s 1-1/4” (3.2 cm) full
port (I.D.) drain valve
drains quickly and
without clogging.
Mercury Free Relays
Reliable and safe for the environment.
Front Serviceable
All components are accessible from the front to make service and maintenance
faster and easier. Even the heating element can be removed without access to the
back of the fryer.
1-1/4” Full Port Drain Valve
Just as with the Solstice Gas, The Solstice Electric uses a full port 1-1/4” drain
valve for quick, clog free draining.
Loading...