PiPO Media BOX X8 User Manual

X8

Ｍｅｄｉａ BOX — X8

USER MANUAL

X8

WELCOME！

T

hank you for purchasing this device。it brings you wonderful user

experience. Before beginning, please refer to this user manual carefully.

In case of any doubts regarding PIPO X8, you are welcomed to visit the PIPO

official Facebook website: www.facebook.com/pipocn, for raising your

questions and sharing your experience。Thank you！

Product features：

 WiFi connection，achieve displaying synchronization easily；

 Based on Intel Baytrail 3736F architecture，processor frequency is 2.16GHz；

X8

C

HAPTER ONE

A Glance on X8

一、 X8 Appearance

X8

KEYS

1：Power Switch key,

2：　USB port, for connecting peripherals
3： Earphone jack
4： Micro USB for connecting to PC, when X8 is running Android OS

5: TF card slot: for TF card , maximum to 64GB

7: HDMI port

8: Lan RJ45 for internet cable

9: DC 12V power supply jack

二、Product Specifications

X8

Items

Function description

1

Processor

Baytrail 3736F ，frequency is 1.83GHz,up to 2.16

2

LCD

7”1280*800

3

RAM

2GB

4

Storage

32GB OR 64GB

5OSWindows 8.1 with Bing + Android 4.4

4

WiFi

2.4GHz , WiFi signal；

6

Connection

ports

HDMI 1.4； MicroUSB for power supply and upgrading,

and USB2.0 for peripherals；

7

Switch key

Mode switching、reset 、upgrading key；

8

Bluetooth

4.0

三、 X8 Accessories：

Name

quantity

X8

Power charger

pc

1

User manual

pc

1

CHAPTER TWO Operations

一、OS operation

1. Connect 12V 2.4A Charger to the X8 DC jack for power supplying；

2. press power button for a few seconds to turn it on;

X8

3. Select Android or Windows, press Android icon to go to regular Android

OS , and press Windows icon to go to Windows system

4.OS Switch

When you are in Windows system press the Win to And Icon for switching

into Android

X8

X8

X8

When you are in Android system, slide the top right corner, and press

the OS switch icon to set up into Windows

X8

5.HDMI output

Go to “Device”-“project”, and connect X8 to TV set (any display )

via HDMI cable

X8

5.1 PC screen only

Images could be shown only in TV BOX X8, HDMI output will be cut off

5.2 Duplicate

The HDMI output on the TV set may be not by full screen, This is

because of the X8 LCD solution is 1280*800, so the HDMI output on the

TV set is also shown by 1280*800

X8

X8

5.3 Extend

When you set up Project mode into Extend, then the X8 rotation may

Be locked, you can not rotate the X8 LCD. Press the desktop for a few

seconds, go to the setting like this in the picture. ”graphics

options ”—“rotation”—“built-in display” or “digital

television”, to set up rotation here

X8

The X8 LCD is the first screen, and the TV set display is the second screen,

move the mouse pointer outside of first screen, it will jump into second

screen and if you move the mouse pointer outside of screen screen, the

mouse pointer will jump into first screen. First screen and second screen

are separate displays, you can do different task on first screen and

second screen. For example watching video on second screen, and the the

same time skype chat or what’sapp chat with friends on the first screen.

There is a lot of fun in the Extend mode, just explore into it!

X8

X8

X8

5.4 Second screen only

In this mode, the images could only be shown on the TV set display,

And the X8 LCD will be light off. And the second screen image may be

upside down. Then please rotate the X8, place the X8 to be landscape

mode or portrait mode, the second screen could be adjusted to normal

displaying.

X8

二、Other functions

 Reset

To reset or recover the X8, go to “setting”--”change PC

setting”—“update and recovery”

 System upgrading and software fixing

Please download the WINPE-TOOLS and X8 Images from PIPO official website:

www.pipo.cn/en service section

Procedure：

1

COPY THE

WINPE_TOOLS

FILE TO THE

USB

STORAGE,PLACE THIS FILE TO THE

ROOT(USB

FORMAT TO BE

NTFS

AND

FAT32,

IT DEPENDS ONIMAGES,FOR EXAMPLE

W3,

THE INSTALL.WIM FILE IS BIGGER THAN

4GB

IN SIZE,THE FORMAT TO BE

NTFS),

THE

USB

NAME SHALL BE

: WINPE

X8

2. C

OPY THEIMAGES INTO"IMAGE"OF

WIMPE_TOOLS,

FOR EXAMPLE,COPY THE

"

INSTALL.WIM

" & "

WINRE.WIM

"

IN

W3

FOLDER INTO THE IMAGES FOLDER OF

WINPE_TOOLS

I

F INSTALL

W4,

ENTER INTO SCRIPT,CHANGE THE MAIN_W4.CMD INTOMAIN.CMD,DELETE

ANOTHER MAIN.CMD OR RENAME IT

AFTER ALL OF THE ABOVE STEPS,START THE TABLETS WITH THE

USB

STORAGE INSERTED

.

X8

D

ECLARATION

Poisonous substances as shown bellow：

parts

Dangerous substance

（Pb）

（Hg）

（Cd）

（Cr6+）

（PBB）

（PBDE）

Case○○○××○

PCB×○○○××

Battery

×○○×○

○

LCD○○○○○○

Cable×○○○××

○：

×：

FCC STATEMENT

1. This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions: (1)This
device may not cause harmful interference,and(2)This device must accept any
interference received, including interference that may cause undesired operation.

2. Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.

This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the following
measures:

—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to which the

receiver is connected.

—Consult the dealer or an experienced radio/ TV technician for help.

FCC Radiation Exposure Statement:

The device has been evaluated to meet general RF exposure requirement.

The device can be used in portable exposure condition without RF striction.

INDUSTRY CANADA NOTICE

This equipment complies with IC radiation exposure limits set forth for an uncontrolled

environment. The device can be used in portable exposure conditions without Rf restrictions.

This device complies with Industry Canada licence-exempt RSS standard(s).1. Operation is
subject to the following two conditions: (1) this device may not cause interference, and (2) this
device must accept any interference, including interference that may cause undesired operation
of the device.2. Changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment.

Avis d’Industrie Canada

Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils
radio exempts de licence. L’exploitation est autorisée aux deux conditions suivantes :

(1) l’appareil ne doit pas produire de brouillage, et
(2) l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique subi, même si le
brouillage est susceptible d’en compromettre le fonctionnement. Cet appareil numérique
ne dépasse pas les Rèlements sur l’interférence radio par un appareil numérique de
classe B stipulées dans les Règlement sur l’interférence redio d’industrie Canada.

2.Les changements ou modifi cations de cette unité non expressément approuvés par la
partie responsable de la conformité pourraient annuler l’autorité de l’utilisateur à utiliser
l’équipement.

IC RF Déclaration sur la radioexposition:
Cet appareil est conforme avec I’exposition aux radiations IC Défi nies pour un
environnement non contrôlé. L’appareil peut être utilisé dans des conditions d’exposition
portatifs sans restrictions Rf.