Pioneer sx-939 User Manual
Specifications and Main Features
- Model: SX-939
- Input Voltage: 120V, 110V, 130V, 220V, and 240V (switchable)
- Power Requirements: The device may work with a voltage range of 110V to 240V across Mains Frequency of 50/60 Hz with 60Hz, or specifically using AC of 120V.
- Power Consumption: 290W for the approved model and together with 5 lines provides 470W.
- Dimensions: The exterior Volumetric siunts Measure up to 520 Printed in millimeter with H measuring 175 and D measuring 420 of 20-1/2 x 6-7/8 x 16-9/16 respectively, alongside inches measure mx by mm and weighing in the middle height range.
- Weight: This item weighs an approximate of 18.5 kg (40 lb 11 oz) without including packaging, and 22.6 kg (49 lb 12 oz) including packaging.
- Continuous Power Output:
- When using both channels at 70W + 70W (8Ω), 80W + 80W(4Ω), those who will output Queensland will have frequency drives of 20Hz and 20kHz and will be able will give maximum voice output of 1n/25.geo Vise Eric Eric B 589 D6491.
- While still using both channels output ofST ,70W + 75W (8Ω) and 100W + 100W for 4Ω enables the powered device to output a maximum frequency of 1k Hz.
- Harmonic Distortion: This ranges from 0:3 %.
- Intermodulation Distortion: This ranges out to be below 0.3%.
- Frequency Response: The vaunted integrated diver comes specced to have a frequency range of 7Hz-100kHz.
- Damping Factor: This units minimum allowed damping factor is set at 45.
- Hum & Noise: This range goes above 110dB.
- FM Usable Sensitivity: This amount is rated at 1.8uV.
- Stereo Separation: This range lies above 70dB.
- AM Sensitivity: When using this via Ferrite antenna, a rating of 300uV/m is recommended.
- AM Signal-to-Noise Ratio: Ouput ranges of 50dB can be used by ISR.
- Dimensions & Weight: This item measures up to560 mm in width and 420 in length weighing in that 18.5 kg range.
- Furnished Parts: Furnished parts for this device include a T-type antenna, operating instructions manual and a Fuse.
Frequently Asked Questions
- What are the different specifications of SX-939?
There are several specifications for SX-939. The continuous power output for the SX-939 at 20Hz to 20 kHz will be 70W + 70W up to 8 ohms and 80W + 80W up to 4 ohms, on the other hand at 1 kHz it will be 75W + 75W and 100W + 100W at the same ohm ratings.
- What types of input voltages are acceptable?
The SX-939 is able to withstand an input voltage of 120 identification, 240,220,110 and 130 volumetric volts as it has a switchble config.
- On what spectrum range will the frequency response of SX-939 work?
The SX-939 has a frequency response ranging from 7 Hz to 100 kHz.
- What is the stereo channel separation?
The stereo separation of sx-939 is 70 dB.
- What audio source does the device support?
This device has input ports for AM, FM, Phono, AUX ,MIC and more.
User Manual
Loading...