Pioneer SX-1980 User Manual

Specifications and Main Features

  • AM Section:
  • Sensitivity: 300 nV/m
  • Signal-to-Noise Ratio: 55 dB
  • Power requirements: 120V 60Hz
  • Power Consumption: UL: 650 W, CSA: 1,400 VA
  • Dimensions: Size in mm:560(W) x 211(H) x 497(D)
  • Weight: No package 35.4 kgs, with pack 40.3 kilograms

Frequently Asked Questions

Q: What is the power output of the SX-1980?

A: Its output per channel is 270 watts continuously for an 8 Ohm speaker.

Q: What is the total harmonic distortion of the power amplifier?

A: the upper total harmonic distortion does not exceed 0.03 percent, 20HZ - 20,000 HZ.

Q: Does the SX-1980 have any built in features to reduce noise?

A: Yes it dos, its rating for hum and noise is 120 DB.

Q: What are the dimensions of the SX-1980?

A: The size of the item is 560(W) x 211(H) x 497(D) mm.

Q: How many voltage models are produced for the SX-1980?

A: There is a model for the USA markets 120 volts, Europe or Oceania is the 220volt and 240volt switchable models. General export and US Military model is 110 volt to 240volt switchable model.

Q: What sort of inputs does the preamplifier section accept?

A: The preamplifier section accepts PHONO, MIC, and AUX inputs but with different level of sensitivity and impedance values.

Q: How good is the signal-to-noise performance for the stereo FM section?

A: The performance boundary for signal-to-noise ratio for the FM stereo sections stands at 75 dB.

Q: What are the outputs for the available speaker terminals?

A: The outputs for available African speaker terminals are speaker A, speaker B, and speaker C. Terminals A and B can also be connected.

Q: What is the weight of the SX-1980 when it is packaged?

A: The packaged weight is 40.3 kg (88 lb 14 oz).

User Manual

Pioneer SX-1980 User Manual
Loading...
+ 92 hidden pages