Pioneer PRV-LX1 Application Note # 190111: Sending a Project to the Hoei Precision DSR Duplicator for Multiple Copies

APPLICATION NOTE AN # 190110

PRV-LX1 – Sending a Project to the Hoei Precision DSR Duplicator for Multiple Copies

O

VERVIEW:

It’s possible when creating a DVD disc from a PRV-LX1 hard drive recording to output the electronic
data directly to a Hoei Precision DSR series DVD duplicator. Instead of burning a DVD master and
transferring the disc to a duplicator, connect the PRV-LX1 directly to the duplicator using the USB-2
interface. The Hoei duplicator, in conjunction with the PRV-LX1, offers electronic transfer which cuts
the duplication time down dramatically.

T

ECHNICAL DETAILS:

After completing your recording, menu creation and DVD navigation settings you are ready to make a
DVD video disc. Instead of making a DVD you can send the DVD project to a Hoei Precision DSR
duplicator.
the Hoei Precision duplicator. Follow the prompts below to allow the duplicator and a PRV-LX1 to
communicate.

Follow the DSR operating instructions and connect a USB-2 cable from the PRV-LX1 to

Follow the instructions below to prepare for duplication through the PRV-LX1.

1. Power on the Hoei Precision DSR duplicator.
Press the DSR’s power switch on the lower right corner to begin initialization.

Please Wait...

Initializing...

2. Power ON the PRV-LX1.

3. Press the No button using the DSR keypad to bypass writing to DVD.

Standby OK!

To DVD?

4. Press No to bypass the HDD Standby option.

Standby OK

To HDD?

Pioneer Electronics (USA) Inc. [phone] Released: 23-Oct-2006
Home & Business Group of America

[phone] Page 1 of 3

AN #190110

5. Press Yes to continue with the installation.

Exit?

6. Press No to bypass the CD option.

CD Duplicator?

7. Press No to bypass the DVD option.

DVD Duplicator?

8. Press No to bypass the DPM.

DPM for General?

9. Press Yes to select the PRV-LX1 as the source device.

PRV-LX1?

10. On the duplicator, open the tray for each needed writer.

STANDBY OK!

To DVD?

11. .Load a blank disc into the open tray, closing the tray after you place the media.
A drive’s status LED lights when a blank disc is recognized.

12. Repeat step 11 until all trays are loaded and closed.

Pioneer Electronics (USA) Inc. [phone] Released: 23-Oct-2006
Home & Business Group of America

[phone] Page 2 of 3