Pioneer DEH-P9800BT User Manual

Operation Manual Manual de instrucciones

High power DSP CD/MP3/WMA/AAC Player with Bluetooth Wireless Technology, RDS tuner and MultiCD control

Reproductor de CD/MP3/WMA/ACC DSP de alta potencia con tecnología inalámbrica Bluetooth, sintonizador RDS y control de CD múltiple

DEH-P9800BT

English Español

Contents

Thank you for buying this Pioneer product.

Please read through these operating instructions so you will know how to operate your model properly. After you have finished reading the instructions, keep this man-

ual in a safe place for future reference.

English

Before You Start About this unit 8

– Operating environment 8 Product registration 8 About this manual 9 In case of trouble 9 Features 9 About WMA 10 About AAC 10 About Bluetooth 10 Resetting the microprocessor 11 Clearing all memory 11 Protecting your unit from theft 11

– Removing the front panel 12

– Attaching the front panel 12

About the demo mode 12

– Reverse mode 12

– Feature demo mode 12

Use and care of the remote control 13

– Installing the battery 13

– Using the remote control 13

– FUNCTION button and AUDIO

button 13

What’s What

Head unit 15 Remote control 15

Storing and recalling broadcast

frequencies 20

Storing the strongest broadcast

frequencies 21

Selecting stations from the preset channel

list 21

Tuning in strong signals 21

RDS

Introduction of RDS operation 22 Switching the display 23 Selecting alternative frequencies 23

– Using PI Seek 23 – Using Auto PI Seek for preset

stations 23

– Limiting stations to regional

programming 23 Receiving traffic announcements 24 Using PTY functions 24

– Searching for an RDS station by PTY

information 24

– Using news program interruption 25 – Receiving PTY alarm broadcasts 25

Using radio text 25

– Displaying radio text 25 – Storing and recalling radio text 26

PTY list 27

Basic Operations

Turning the unit on 17 Selecting a source 17 Loading a disc 17 Adjusting the volume 18 Turning the unit off 18

Tuner

Listening to the radio 19 Introduction of advanced tuner

operation 20

Built-in CD Player

Playing a CD 28 Selecting a track directly 28 Introduction of advanced built-in CD player

operation 29 Repeating play 29 Playing tracks in random order 29 Scanning tracks of a CD 30 Pausing CD playback 30 Selecting the search method 30

Contents

Searching every 10 tracks in the current

disc 30

Using disc title functions 31

– Entering disc titles 31 – Displaying disc titles 32

Using CD TEXT functions 32

– Displaying text information on CD TEXT

discs 32

– Scrolling text information in the

display 32

– Selecting tracks from the track title

list 32

MP3/WMA/AAC/WAV Player

Playing MP3/WMA/AAC/WAV files 33 Selecting a track directly in the current

folder 34

Introduction of advanced built-in CD player

(MP3/WMA/AAC/WAV) operation 35 Repeating play 35 Playing tracks in random order 35 Scanning folders and tracks 36 Pausing MP3/WMA/AAC/WAV playback 36 Selecting the search method 36 Searching every 10 tracks in the current

folder 36 Displaying text information on MP3/WMA/

AAC/WAV disc 37

– When playing back an MP3/WMA/AAC

disc 37

– When playing back a WAV disc 37 Scrolling text information in the display 37 Selecting tracks from the file name list 38 Displaying jacket arts on CD-ROM discs 38

– Reading jacket arts 38

– Selecting folders with jacket arts 39

Bluetooth Telephone

Hands-free phoning with cellular phones

featuring Bluetooth wireless technology 40

About the telephone source 41

– Standby mode 41 Setting up for hands-free phoning 41 Basic operation of hands-free phoning 42

– Making a phone call 42

– Taking a phone call 43

Introduction of advanced hands-free phoning

operation 44

Connecting a cellular phone 44

– Searching for available cellular

phones 45

– Using a cellular phone to initiate a

connection 45 Disconnecting a cellular phone 46 Registering connected cellular phone 46 Deleting a registered phone 46 Connecting to a registered cellular

phone 47

– Connecting to a registered phone

manually 47

– Connecting to a registered phone

automatically 47 Using the Phone Book 48

– Transferring entries to the Phone

Book 48

– Changing the Phone Book display

order 49

– Calling a number in the Phone

Book 49

– Assign genres to phone numbers 49 – Editing the name of a Phone Book

entry 50

– Editing phone numbers 51 – Selecting the icon of a Phone Book

entry 51

Contents

English

– Clearing a Phone Book entry 52 – Using preset numbers 52

Clearing memory 52 Using the Call History 53

– Displaying the Call History 53 – Calling a number from the Call

History 54

– Assigning preset numbers 54 Making a call by entering phone number 54 Echo canceling and noise reduction 55 Changing the ring tone 55 Setting the automatic rejecting 56 Setting the automatic answering 56 Selecting the icon for user phone 56 Displaying BD (Bluetooth Device)

address 56

– Displaying BD address of your cellular

phone 57

– Displaying BD address of this unit 57 Displaying system version for repair 57

Bluetooth Audio

Listening to songs on BT Audio (Bluetooth

audio player) 58 Setting up for Bluetooth audio player 58 Connecting a Bluetooth audio player 59 Function operation 60 Playing songs on Bluetooth audio player 60 Pausing a song 60 Stopping playback 60 Disconnecting a Bluetooth audio player 61 Displaying BD address of this unit 61 Displaying system version for repair 61

Multi-CD Player

Playing a CD 62 Selecting a track directly 62 50-disc multi-CD player 63

Introduction of advanced multi-CD player

operation 63 Repeating play 64 Playing tracks in random order 64 Scanning CDs and tracks 64 Pausing CD playback 65 Using ITS playlists 65

– Creating a playlist with ITS

programming 65

– Playback from your ITS playlist 65 – Erasing a track from your ITS

playlist 66

– Erasing a CD from your ITS playlist 66

Using disc title functions 66

– Entering disc titles 66 – Displaying disc titles 67 – Selecting discs from the disc title

list 67

Using CD TEXT functions 67

– Displaying text information on CD TEXT

discs 68

– Scrolling text information in the

display 68

– Selecting tracks from the track title

list 68

Playing songs on iPod

Listening to songs on your iPod 69 Browsing for a song 69

– Searching for a song 70 – Selecting a playlist 70

Displaying text information on iPod 70 Introduction of advanced iPod adapter

operation 71 Repeating play 71 Playing songs in a random order

(shuffle) 71 Pausing a song 72

Contents

TV tuner

Watching the television 73 Introduction of advanced TV tuner

operation 74

Storing and recalling broadcast stations 74 Storing the strongest broadcast stations

sequentially 74

Selecting stations from the preset channel

list 75

DVD Player

Playing a disc 76 Selecting a disc 76 Selecting a folder 76 Introduction of advanced DVD player

operation 77 Repeating play 77 Pausing disc playback 78 Playing tracks in random order 78 Scanning tracks of a CD/MP3/WMA 78 Using ITS playlist and disc title functions 78 Using disc title functions 78

– Entering disc titles 79

Audio Adjustments

Adjusting the audio easily 80 Adjusting the audio finely 80 Extra functions 80 Introduction of audio adjustments 81 Using the position selector 82 Using balance adjustment 82 Using the time alignment 82

– Adjusting the time alignment 83

Using subwoofer output 83

– Adjusting subwoofer settings 84 – Adjusting low pass filter attenuation

slope 84

Using the high pass filter 84

– Muting the speaker units (filters) 84

– Setting the high pass filter for front

speakers 85

– Setting the high pass filter for rear

speakers 85 Using the auto-equalizer 86 Using the equalizer 86

– Recalling equalizer curves 86 – Adjusting equalizer curves 86 – Adjusting 16-band graphic

equalizer 87 Using BBE sound 87 Using compression and BMX 88 Adjusting loudness 88 Using automatic sound levelizer 88 Adjusting source levels 89 Using auditory user interface 89 Auto TA and EQ (auto-time alignment and

auto-equalizing) 89

– Before operating the auto TA and EQ

function 90

– Carrying out auto TA and EQ 91

Initial Settings

Adjusting initial settings 93 Selecting the display language 93 Setting the date 93 Setting the clock 94 Turning the off clock display on or off 94 Setting the FM tuning step 94 Switching Auto PI Seek 95 Switching the warning tone 95 Switching the face auto open 95 Switching the auxiliary setting 95 Switching the dimmer setting 95 Adjusting the brightness 96 Correcting distorted sound 96 Switching the sound muting/attenuation 96 Switching the feature demo 96 Switching the reverse mode 97

Contents

Switching the Ever Scroll 97 Calibrating the RPMs 97 Activating the BT Audio source 97 Entering PIN code for Bluetooth wireless

connection 98

Resetting the Bluetooth wireless technology

module 98

Other Functions Using the AUX source 99

– About AUX1 and AUX2 99 – Selecting AUX as the source 99 – Setting the AUX title 99

Using different entertainment displays 100

– Setting the entertainment display 100 – Setting the background display 101

Rewriting the entertainment displays and the

icons for telephone functions 102

English

Additional Information

Understanding built-in CD player error

messages 103

Understanding auto TA and EQ error

messages 103

Understanding error message on rewriting

the entertainment displays 104 CD player and care 104 CD-R/CD-RW discs 104 Dual Discs 105 MP3, WMA, AAC and WAV files 105

– MP3 additional information 106 – WMA additional information 106 – AAC additional information 107 – WAVadditional information 107

About folders and MP3/WMA/AAC/WAV

files 107 Terms 109 Specifications 111

Section

Before You Start

If you want to dispose this product, do not mix it with general household waste. There is a separate collection system for used electronic products in accordance with legislation that requires proper treatment, recovery and recycling.

Private households in the 25 member states of the EU, in Switzerland and Norway may return their used electronic products free of charge to designated collection facilities or to a retailer (if you purchase a similar new one). For countries not mentioned above, please contact your local authorities for the correct method of disposal. By doing so you will ensure that your disposed product undergoes the necessary treatment, recovery and recycling and thus prevent potential negative effects on the environment and human health.

This product contains a laser diode of higher class than 1. To ensure continued safety, do not remove any covers or attempt to gain access to the inside of the product. Refer all servicing to qualified personnel.

! The Pioneer CarStereo-Pass is for use only in

Germany.

! Keep this manual handy as a reference for op-

erating procedures and precautions.

! Always keep the volume low enough so that

you can hear sounds from outside the vehicle.

! Protect this unit from moisture. ! If the battery is disconnected or discharged,

the preset memory will be erased and must be reprogrammed.

Operating environment

This unit should be used within the temperature ranges shown below. Operating temperature range: –10 °C to +60 °C (14 °F to 140 °F) EN300328 ETC test temperature: –20 °C and +55 °C (–4 °F and 131 °F)

About this unit

The tuner frequencies on this unit are allocated for use in Western Europe, Asia, the Middle East, Africa and Oceania. Use in other areas may result in poor reception. The RDS (radio data system) function operates only in areas with FM stations broadcasting RDS signals.

CAUTION

! Do not allow this unit to come into contact

with liquids. Electrical shock could result. Also, this unit damage, smoke, and overheat could result from contact with liquids.

! “CLASS 1 LASER PRODUCT”

Product registration

Visit us at the following site:

! Register your product. We will keep the de-

tails of your purchase on file to help you refer to this information in the event of an insurance claim such as loss or theft.

Before You Start

Section

English

About this manual

This unit features a number of sophisticated functions ensuring superior reception and operation. All the functions have been designed for the easiest possible use, but many are not self-explanatory. This operation manual will help you benefit fully from this unit’s potential and to maximize your listening enjoyment. We recommend that you familiarize yourself with the functions and their operation by reading through the manual before you begin using this unit. It is especially important that you read and observe WARNINGs and CAU- TIONs in this manual.

In case of trouble

Should this product fail to operate properly, contact your dealer or nearest authorized Pioneer Service Station.

Features

CD playback

Music CD/CD-R/CD-RW playback is possible.

MP3 file playback

You can play back MP3 files recorded on CDROM/CD-R/CD-RW (ISO9660 Level 1/Level 2 standard recordings). ! Supply of this product only conveys a li-

cense for private, non-commercial use and does not convey a license nor imply any right to use this product in any commercial (i.e. revenue-generating) real time broadcasting (terrestrial, satellite, cable and/or any other media), broadcasting/streaming via internet, intranets and/or other networks or in other electronic content distribution systems, such as pay-audio or audio-on-demand applications. An inde-

pendent license for such use is required. For details, please visit http://www.mp3licensing.com.

WMA file playback

You can play back WMA files recorded on CDROM/CD-R/CD-RW (ISO9660 Level 1/Level 2 standard recordings).

AAC file playback

You can play back AAC files recorded on CDROM/CD-R/CD-RW (ISO9660 Level 1/Level 2 standard recordings).

WAV file playback

You can play back WAV files recorded on CDROM/CD-R/CD-RW (Linear PCM (LPCM)/MS ADPCM recordings).

RDS (radio data system) receiver

This unit’s RDS tuner receives the radio data broadcast service.

Hands-free phoning

This unit realizes effortless hands-free phoning with Bluetooth wireless technology.

Bluetooth audio player compatibility

When you use this unit with a Bluetooth audio player featuring Bluetooth wireless technology, you can control the Bluetooth audio player.

iPod

compatibility

When you use this unit with a Pioneer iPod adapter (CD-IB100), you can control an iPod with Dock Connector. ! iPod is a trademark of Apple Computer,

Inc., registered in the U.S. and other countries.

Section

Before You Start

About WMA

The Windows Media™ logo printed on the box indicates that this unit can play back WMA data. WMA is short for Windows Media Audio and refers to an audio compression technology that is developed by Microsoft Corporation. WMA data can be encoded by using Windows Media Player version 7 or later. Windows Media and the Windows logo are trademarks or registered trademarks of Microsoft Corporation in the United States and/or other countries.

Notes

! This unit may not operate correctly depending

on the application used to encode WMA files.

! Depending on the version of Windows Media

Player used to encode WMA files, album names and other text information may not be correctly displayed.

! There may be a slight delay when starting

playback of WMA files encoded with image data.

iTunes is a trademark of Apple Computer, Inc., registered in the U.S. and other countries.

About Bluetooth

Bluetooth is a short-range wireless radio connectivity technology that is developed as a cable replacement for mobile phones, handheld PCs and other devices. Bluetooth operates in 2.4 GHz frequency range and transmits voice and data at speeds up to 1 megabit per second. Bluetooth was launched by a special interest group (SIG) that comprises of Ericsson Inc., Intel Corp., Nokia Corp., Toshiba and IBM in 1998, and it is currently developed by nearly 2 000 companies worldwide. ! The Bluetooth word mark and logos are

owned by the Bluetooth SIG, Inc. and any use of such marks by Pioneer Corporation is under license. Other trademarks and trade names are those of their respective owners.

About AAC

AAC is short for Advanced Audio Coding and refers to an audio compression technology standard used with MPEG 2 and MPEG 4. Several applications can be used to encode AAC files, but file formats and extensions differ depending on the application which is used to encode. This unit plays back AAC files encoded by

iTunes

version 4.8 and earlier.

Before You Start

Section

English

Resetting the microprocessor

The microprocessor must be reset under the following conditions: ! Prior to using this unit for the first time

after installation

! If the unit fails to operate properly ! When strange or incorrect messages ap-

pear on the display

% Press RESET with a pen tip or other pointed instrument.

RESET button

Clearing all memory

To protect personal and private information, data about the phone stored in this unit can be deleted.

1 Press SOURCE and hold until the unit turns off.

2 Press MULTI-CONTROL and hold until Language select appears in the display.

3 Turn MULTI-CONTROL to select Phone reset. Phone reset appears in the display.

4 Push MULTI-CONTROL right to show a confirmation display. Clear memory YES is displayed. Clearing

memory is now on standby.

# If you do not want to reset phone memory, press BAND.

5 Press MULTI-CONTROL to clear the memory.

All data in the telephone source, including Phone Book entries, number presets and the Call History is cleared.

Protecting your unit from theft

The front panel can be detached from the head unit and stored in the provided protective case to prevent theft. ! If the front panel is not detached from the

head unit within five seconds of turning off the ignition, a warning tone will sound and the front panel will open.

! You can turn off the warning tone. See

Switching the warning tone on page 95.

! You can turn off the face auto open. See

Switching the face auto open on page 95.

Important

! Never use force or grip the display and the

buttons too tightly when removing or attaching.

! Avoid subjecting the front panel to excessive

shocks.

! Keep the front panel out of direct sunlight and

high temperatures.

! A few seconds after turning the ignition

switch to on or off, the front panel automatically moves. When this happens, your fingers may become jammed in the panel, so keep your hands away from it.

Section

Before You Start

Removing the front panel

1 Press and hold EJECT to open the front panel.

2 Slide and remove the front panel toward you.

Take care not to grip it too tightly or to drop the front panel and protect it from contact with water or other fluids to prevent permanent damage.

3 Put the front panel into provided protective case for safe keeping.

Attaching the front panel

1 Make sure the inner cover is closed.

2 Replace the front panel by clipping it into place.

About the demo mode

This unit features two demonstration modes. One is the reverse mode, the other is the feature demo mode.

Important

The red lead (ACC) of this unit should be connected to a terminal coupled with ignition switch on/off operations. If this is not done, the vehicle battery may be drained.

Reverse mode

If you do not perform an operation within about 30 seconds, screen indications start to reverse, and then continue reversing every 10 seconds. Pressing BAND when power to this unit is turned off while the ignition switch is set to ACC or ON cancels the reverse mode. Press BAND again to start the reverse mode.

Feature demo mode

The feature demo automatically starts when power to this unit is turned off while the ignition switch is set to ACC or ON. Pressing DISPLAY during feature demo operation cancels the feature demo mode. Press DISPLAY again to start the feature demo mode. Remember that if the feature demo continues operating when the car engine is turned off, it may drain battery power.

Before You Start

Section

English

Use and care of the remote control

Installing the battery

Slide the tray out on the back of the remote control and insert the battery with the plus (+) and minus (–) poles pointing in the proper direction. ! When using for the first time, pull out the

film protruding from the tray.

WARNING

Keep the battery out of the reach of children. Should the battery be swallowed, immediately consult a doctor.

CAUTION

! Use only one CR2025 (3 V) lithium battery. ! Remove the battery if the remote control is not

used for a month or longer.

! Do not recharge, disassemble, heat or dispose

of the battery in fire.

! Do not handle the battery with metallic tools. ! Do not store the battery with metallic materi-

als.

! In the event of battery leakage, wipe the re-

mote control completely clean and install a new battery.

! When disposing of used batteries, please

comply with governmental regulations or environmental public institutions’ rules that apply in your country/area.

Using the remote control

Point the remote control in the direction of the front panel to operate.

! The remote control may not function prop-

erly in direct sunlight.

Important

! Do not store the remote control in high tem-

peratures or direct sunlight.

! Do not let the remote control fall onto the

floor, where it may become jammed under the brake or accelerator pedal.

FUNCTION button and AUDIO button

You can also select the desired mode by FUNCTION button and AUDIO button on the remote control. But operation of FUNCTION button and AUDIO button on the remote control differs from the operation of MULTI-CONTROL on the head unit. When operating the remote control, switch through the modes as described below to select the mode.

FUNCTION button operation

% Press FUNCTION to select the desired mode (e.g., built-in CD player).

Press FUNCTION repeatedly to switch between the following modes: Play mode (repeat play)—Random mode (random play)—Scan mode (scan play)— Pause (pause)—Search mode (search method)—Title Input (disc title input)—Jacket art (jacket art read)

Note

Refer to Introduction of advanced built-in CD player operation on page 29.

AUDIO button operation

% Press AUDIO to select the desired mode.

Press AUDIO repeatedly to switch between the following modes:

Section

Before You Start

Fader (balance adjustment)—Position (position selector)—TA Mode (time alignment setting)—Time Alignment (time alignment adjusting)—Loudness (loudness)—Powerful (graphic equalizer adjustment)—FREQ. (16band graphic equalizer adjustment)—

Subwoofer1 (subwoofer on/off)— Subwoofer2 (subwoofer cut-off frequency)— Subwoofer3 (subwoofer slope)—Front HPF

(front high pass filter slope)— Front HPF FREQ. (front high pass filter cut-off frequency)—Rear HPF (rear high pass filter slope)—Rear HPF FREQ. (rear high pass filter cut-off frequency)—BBE (BBE)—COMP/BMX (Compression and BMX) —Auto EQ (autoequalizer on/off)—ASL (automatic sound levelizer)—SLA (source level adjustment)— AUI sound level (auditory user interface)

Note

Refer to Introduction of audio adjustments on page 81.

What’s What

Section

English

Head unit

1 EQ button

Press to select various equalizer curves.

2 Connection status indicator

Lights up when your cellular phone is connected via Bluetooth wireless technology.

3 DISPLAY button

Press to select different displays.

4 TA button

Press to turn TA function on or off. Press and hold to turn NEWS function on or off.

5 PHONE button

Press to select the phone as the source. While operating a phone source, press to end a call, reject an incoming call or cancel making a call.

6 MULTI-CONTROL

Move to perform manual seek tuning, fast forward, reverse and track search controls. Also used for controlling functions. Turn to increase or decrease the volume.

7 LIST button

Press to display the disc title list, track title list, folder list, file list or preset channel list depending on the source.

8 RESET button

Press to reset the microprocessor.

9 BAND button

Press to select among three FM bands and MW/LW bands and to cancel the control mode of functions.

a SOURCE button

This unit is turned on by selecting a source. Press to cycle through all the available sources.

b EJECT button

Press to eject a CD from your built-in CD player. Press and hold to open or close the front panel.

Remote control

Operation is the same as when using the buttons on the head unit.

c VOLUME buttons

Press to increase or decrease the volume.

d FUNCTION button

Press to select functions.

c9d

Section

What’s What

j ON HOOK button

While operating the phone source, press to end a call or reject an incoming call.

k ATT button

Press to quickly lower the volume level, by about 90%. Press once more to return to the original volume level.

l ENTERTAINMENT button

Press to change to the entertainment display.

m AUDIO button

Press to select various sound quality controls.

e Joystick

Move to perform manual seek tuning, fast forward, reverse and track search controls. Also used for controlling functions. Functions are the same as MULTI-CONTROL except for volume control.

f DIRECT button

Press to directly select the desired track.

g CLEAR button

Press to cancel the input number when 0–9 are used.

h 0–9 buttons

Press to directly select the desired track, preset tuning or disc. Buttons 1–6 can operate the preset tuning for the tuner or disc number search for the multi-CD player.

i OFF HOOK button

Press to start talking on the phone while operating a phone source.

Basic Operations

Section

English

Turning the unit on

% Press SOURCE to turn the unit on.

When you select a source, the unit is turned on.

Selecting a source

You can select a source you want to listen to. To switch to the built-in CD player, load a disc in the unit (refer to page 28).

% Press SOURCE to select a source.

Press SOURCE repeatedly to switch between the following sources:

Tuner—Television—DVD player/MultiDVD player—Built-in CD player—MultiCD player—iPod—External unit 1—External unit 2—AUX1—AUX2—Telephone— BT Audio

Notes

! In the following cases, the sound source will

not change: — When there is no unit corresponding to the

selected source connected to this unit.

— When there is no disc in the unit. — When there is no disc in the DVD player. — When there is no magazine in the multi-

CD player.

— When there is no magazine in the multi-

DVD player.

— When the AUX (auxiliary input) is set to off

(refer to page 95).

— When the BT Audio source is set to off

(refer to Activating the BT Audio source on

page 97).

! External unit refers to a Pioneer product (such

as one available in the future) that, although incompatible as a source, enables control of basic functions by this unit. Two external units can be controlled by this unit. When two external units are connected, the allocation of

them to external unit 1 or external unit 2 is automatically set by this unit.

! When this unit’s blue/white lead is connected

to the vehicle’s auto-antenna relay control terminal, the vehicle’s antenna extends when this unit’s source is turned on. To retract the antenna, turn the source off.

Loading a disc

1 Press EJECT to open the front panel.

CD loading slot appears.

# After a CD has been inserted, press SOURCE to select the built-in CD player.

2 Insert a CD into the CD loading slot.

Front panel is closed automatically, and playback will start.

! With jacket art function on, jacket arts on

CD-ROM disc are automatically read in this unit when the disc is inserted. To cancel reading jacket arts, press BAND. For details, refer to Reading jacket arts on page 38.

CD loading slot

# You can eject a CD by pressing EJECT.

Notes

! The built-in CD player plays one standard, 12-

cm or 8-cm CD at a time. Do not use an adapter when playing 8-cm CDs.

! Do not insert anything other than a CD into

the CD loading slot.

Section

Basic Operations

! There is sometimes a delay between starting

up CD playback and the sound being issued. When being read, Format read is displayed.

! If you cannot insert a disc completely or if

after you insert a disc the disc does not play, check that the label side of the disc is up. Press EJECT to eject the disc, and check the disc for damage before inserting it again.

! When the CD loading or ejecting function

does not operate properly, you can eject the CD by pressing and holding EJECT while opening the front panel.

! If an error message such as ERROR-11 is dis-

played, refer to Understanding built-in CD player error messages on page 103.

Adjusting the volume

% Use MULTI-CONTROL to adjust the sound level.

With the head unit, turn MULTI-CONTROL to increase or decrease the volume. With the remote control, press VOLUME to increase or decrease the volume.

Turning the unit off

% Press SOURCE and hold until the unit turns off.

43521

Tuner

Section

English

Listening to the radio

These are the basic steps necessary to operate the radio. More advanced tuner operation is explained starting on the next page. This unit’s AF (alternative frequencies search) function can be turned on and off. AF should be off for normal tuning operation (refer to page 23).

1 Stereo (5) indicator

Shows when the selected frequency is being broadcast in stereo.

2 LOC indicator

Shows when local seek tuning is on.

3 Band indicator

Shows which band the radio is tuned to, MW/LWor FM.

2 Press BAND to select a band.

Press BAND until the desired band is displayed, FM-1, FM-2, FM-3 for FM or MW/LW.

3 To perform manual tuning, push MULTI-CONTROL left or right.

The frequencies move up or down step by step.

4 To perform seek tuning, push and hold MULTI-CONTROL left or right for about one second and release.

The tuner will scan the frequencies until a broadcast strong enough for good reception is found.

# You can cancel seek tuning by pushing MULTI-CONTROL left or right. # If you push and hold MULTI-CONTROL left or right you can skip stations. Seek tuning starts as soon as you release MULTI-CONTROL.

4 Preset number indicator

Shows which preset has been selected.

5 Frequency indicator

Shows the frequency to which the tuner is tuned.

6 Signal level indicator

Shows the radio wave strength.

1 Press SOURCE to select the tuner. Press SOURCE until you see Tuner displayed.

Section

Tuner

Introduction of advanced tuner operation

1 Function display

Shows the function status.

1 Press MULTI-CONTROL to display the main menu. FUNCTION, AUDIO and ENTERTAINMENT

appear on the display.

2 Use MULTI-CONTROL to select FUNCTION.

Turn to change the menu option; press to select. The function name appears on the display.

3 Turn MULTI-CONTROL to select the function.

Turn MULTI-CONTROL clockwise or counterclockwise to switch between the functions in the following order: BSM (best stations memory)—Regional (regional)—Local (local seek tuning)—

PTY search (program type selection)— Traffic announcement (traffic announcement

standby)—Alternative FREQ. (alternative frequencies search)—News interrupt (news program interruption)

# To return to the frequency display, press BAND. # If MW/LW band is selected, you can only select BSM or Local.

Note

If you do not operate the function within about 30 seconds, the display is automatically returned to the frequency display.

Storing and recalling broadcast frequencies

You can easily store up to six broadcast frequencies for later recall.

1 When you find a frequency that you want to store in memory press LIST to switch to the preset channel list mode.

2 Use MULTI-CONTROL to store the selected frequency in memory.

Turn to change the preset number; press and hold to store. The preset number you have selected will flash and then remain lit. The selected radio station frequency has been stored in memory.

# If you do not operate the list within about 30 seconds, the preset channel list mode is canceled automatically.

Notes

! Up to 18 FM stations, six for each of the three

FM bands, and six MW/LW stations can be stored in memory.

! You can also store radio station frequencies

assigned to preset tuning numbers by pressing and holding one of the preset tuning buttons 1–6 on the remote control.

Tuner

Section

English

Storing the strongest broadcast frequencies

BSM (best stations memory) lets you automatically store the six strongest broadcast frequencies under preset tuning buttons 1–6. Once stored you can tune in to those frequencies with the touch of button.

1 Use MULTI-CONTROL to select BSM in the function menu. BSM appears in the display.

2 Press MULTI-CONTROL to turn BSM on. Searching is displayed. While Searching is

displayed, the six strongest broadcast frequencies will be stored under preset tuning numbers 1–6 in the order of their signal strength. When finished, the preset channel list appears.

# To cancel the storage process, press

MULTI-CONTROL.

3 Use MULTI-CONTROL to select the desired station.

Turn to change the station; press to select.

# You can also change the station by pushing MULTI-CONTROL up or down.

Note

Storing broadcast frequencies with BSM may replace broadcast frequencies you have saved using buttons 1–6.

Selecting stations from the preset channel list

The preset channel list lets you see the list of preset stations and select one of them to receive.

1 Press LIST to switch to the preset channel list mode during the frequency display.

2 Use MULTI-CONTROL to select the desired station.

Turn to change the station; press to select.

# You can also change the station by pushing MULTI-CONTROL up or down. # If you do not operate the list within about 30 seconds, the preset channel list mode is canceled automatically.

Notes

! You can also recall radio station frequencies

assigned to preset tuning numbers by pushing MULTI-CONTROL up or down during the frequency display.

! You can also recall radio station frequencies

assigned to preset tuning numbers by pressing one of the preset tuning buttons 1–6 on the remote control.

Tuning in strong signals

Local seek tuning lets you tune in only those radio stations with sufficiently strong signals for good reception.

1 Use MULTI-CONTROL to select Local in the function menu. Local appears in the display.

2 Press MULTI-CONTROL to turn local seek tuning on.

Local seek sensitivity (e.g., Level 2) appears in the display.

# To turn local seek tuning off, press

MULTI-CONTROL again.

3 Push MULTI-CONTROL left or right to set the sensitivity.

There are four levels of sensitivity for FM and two levels for MW/LW: FM: Level 1—Level 2—Level 3—Level 4 MW/LW: Level 1—Level 2 The Level 4 setting allows reception of only the strongest stations, while lower settings let you receive progressively weaker stations.

634

Section

RDS

Introduction of RDS operation

RDS (radio data system) is a system for providing information along with FM broadcasts. This inaudible information provides such features as program service name, program type, traffic announcement standby and automatic tuning, and is intended to aid radio listeners in finding and tuning in to a desired station.

1 TEXT indicator

Shows when the radio text is received.

2 Program service name

Shows the name of broadcast program.

3 News (

Shows when the set news program is received.

4 TP (

Shows when a TP station is tuned in.

5 PTY (program type ID code) information

Shows the PTY (program type ID code) information ! PTY (program type ID code) information

is listed on page 27.

! If a PTY code of zero is received from a

station, display is blank. This indicates that the station has not defined its program contents.

) indicator

! If the signal is too weak for this unit to

pick up the PTY code, the PTY information display is blank.

6 Signal level indicator

Shows the radio wave strength.

1 Press MULTI-CONTROL to display the main menu. FUNCTION, AUDIO and ENTERTAINMENT

appear on the display.

2 Use MULTI-CONTROL to select FUNCTION.

Turn to change the menu option; press to select. The function name appears on the display.

3 Turn MULTI-CONTROL to select the function.

Turn MULTI-CONTROL clockwise or counterclockwise to switch between the functions in the following order: BSM (best stations memory)—Regional (regional)—Local (local seek tuning)—

PTY search (program type selection)— Traffic announcement (traffic announcement

standby)—Alternative FREQ. (alternative frequencies search)—News interrupt (news program interruption)

# To return to the frequency display, press BAND. # If MW/LW band is selected, you can only select BSM or Local.

Notes

! If you do not operate the function within about

30 seconds, the display is automatically returned to the frequency display.

! RDS service may not be provided by all sta-

tions.

! RDS functions such as AF and TA are only ac-

tive when your radio is tuned to an RDS station.

RDS

Section

English

Switching the display

You can display the PTY (program type ID code) information.

% Press DISPLAY.

Press DISPLAY repeatedly to switch between the following settings: PTY (program type ID code) information—Simple display

Selecting alter native frequencies

If you are listening to a broadcast and the reception becomes weak or there are other problems, the unit will automatically search for a different station in the same network which is broadcasting a stronger signal. ! The default setting for AF is on.

1 Use MULTI-CONTROL to select Alternative FREQ. in the function menu. Alternative FREQ. appears in the display.

2 Press MULTI-CONTROL to turn AF on. ON appears in the display.

# To turn AF off, press MULTI-CONTROL again.

Notes

! Only RDS stations are tuned in during seek

tuning or BSM when AF is on.

! When you recall a preset station, the tuner

may update the preset station with a new frequency from the station’s AF list. No preset number appears on the display if the RDS data for the station received differs from that of the originally stored station.

! Sound may be temporarily interrupted by an-

other program during an AF frequency search.

! AF can be turned on or off independently for

each FM band.

Using PI Seek

If the unit fails to find a suitable alternative frequency, or if you are listening to a broadcast and the reception becomes weak, the unit will automatically search for a different station with the same programming. During the search, PI Seek is displayed and the output is muted. The muting is discontinued after completion of the PI Seek, whether or not a different station is found.

Using Auto PI Seek for preset stations

When preset stations cannot be recalled, as when travelling long distances, the unit can be set to perform PI Seek during preset recall. ! The default setting for Auto PI Seek is off.

See Switching Auto PI Seek on page 95.

Limiting stations to regional programming

When AF is used to automatically retune frequencies, the regional function limits the selection to stations broadcasting regional programs.

1 Use MULTI-CONTROL to select Regional in the function menu. Regional appears in the display.

2 Press MULTI-CONTROL to turn the regional function on. ON appears in the display.

# To turn the regional function off, press

MULTI-CONTROL again.

Section

RDS

Notes

! Regional programming and regional networks

are organized differently depending on the country (i.e., they may change according to the hour, state or broadcast area).

! The preset number may disappear on the dis-

play if the tuner tunes in a regional station which differs from the originally set station.

! The regional function can be turned on or off

independently for each FM band.

Receiving traffic announcements

TA (traffic announcement standby) lets you receive traffic announcements automatically, no matter what source you are listening to. TA can be activated for both a TP station (a station that broadcasts traffic information) or an enhanced other network’s TP station (a station carrying information which cross-references TP stations).

1 Tune in a TP or enhanced other network’s TP station.

2 Press TA to turn traffic announcement standby on.

Press TA and TA ON appears in the display. The tuner will stand-by for traffic announcements.

# To turn traffic announcements standby off, press TA again.

3 Use MULTI-CONTROL to adjust the TA volume when a traffic announcement begins.

The newly set volume is stored in memory and recalled for subsequent traffic announcements.

4 Press TA while a traffic announcement is being received to cancel the announcement.

The tuner returns to the original source but remains in the standby mode until TA is pressed again.

# You can also cancel the announcement by pressing SOURCE, BAND or MULTI-CONTROL while a traffic announcement is being received.

Notes

! When a traffic announcement is received, traf-

fic announcement interruption screen is displayed.

! You can also turn the TA function on or off in

the menu that appears by using MULTI-CONTROL.

! The system switches back to the original

source following traffic announcement reception.

! Only TP and enhanced other network’s TP sta-

tions are tuned in during seek tuning or BSM when TA is on.

Using PTY functions

You can tune in a station by using PTY (program type) information.

Searching for an RDS station by PTY information

You can search for general types of broadcasting programs, such as those listed on page

27.

1 Use MULTI-CONTROL to select PTY search in the function menu. PTY search appears in the display.

RDS

Section

English

2 Push MULTI-CONTROL left or right to select a program type.

There are four program types:

News&INFO—Popular—Classics—Others

3 Press MULTI-CONTROL to begin the search.

When you press MULTI-CONTROL the program type name in the display begins to flash. The unit searches for a station broadcasting that program type.

# To cancel the search, press MULTI-CONTROL again.

Notes

! The program of some stations may differ from

that indicated by the transmitted PTY.

! If no station is broadcasting the type of pro-

gram you searched for, Not found is displayed for about two seconds and then the tuner returns to the original station.

Using news program interruption

When a news program is broadcast from a PTY code news station, the unit can switch from any station to the news broadcast station. When the news program ends, reception of the previous program resumes.

% Press TA and hold to turn on news program interruption.

Press TA until NewsON appears in the display.

# To turn off news program interruption, press TA and hold until NewsOFF appears in the dis- play. # A news program can be canceled by pressing TA. # You can also cancel the news program by pressing SOURCE, BAND or MULTI-CONTROL while a news program is being received.

Notes

! When a news program is received, news pro-

gram interruption screen is displayed.

! You can also turn on or off news program in

the menu that appears by using MULTI-CONTROL.

Receiving PTY alarm broadcasts

PTY alarm is a special PTY code for announcements regarding emergencies such as natural disasters. When the tuner receives the radio alarm code, ALARM appears on the display and the volume adjusts to the TA volume. When the station stops broadcasting the emergency announcement, the system returns to the previous source. ! An emergency announcement can be can-

celed by pressing TA.

! You can also cancel an emergency an-

nouncement by pressing SOURCE, BAND or MULTI-CONTROL.

Using radio text

This tuner can display radio text data transmitted by RDS stations, such as station information, the name of the currently broadcast song and the name of the artist. ! The tuner automatically memorizes the

three latest radio text broadcasts received, replacing text from the least recent reception with new text when it is received.

Displaying radio text

You can display the currently received radio text and the three most recent radio texts.

Section

RDS

1 Press DISPLAY and hold to display radio text.

Radio text for the currently broadcasting station is displayed.

# You can cancel radio text display by pressing DISPLAY or BAND. # When no radio text is received, No text ap- pears in the display.

2 Push MULTI-CONTROL left or right to recall the three most recent radio texts.

Pushing MULTI-CONTROL left or right switches between the current and the three radio text data displays.

# If there is no radio text data in memory the display will not change.

Storing and recalling radio text

You can store data from up to six radio text transmissions for buttons 1–6. ! Only the remote control can operate this

function.

1 Display the radio text you want to store in memory.

Refer to Displaying radio text on the previous page.

2 Press and hold any buttons 1–6 on the remote control to store the selected radio text.

The memory number will display and the selected radio text will be stored in memory. The next time you press the same button on the remote control in the radio text display the stored text is recalled from memory.

RDS

PTY list

General Specific Type of program

News&INFO News News

Affairs Current affairs

Info General information and advice

Sport Sports

Weather Weather reports/meteorological information

Finance Stock market reports, commerce, trading, etc.

Popular Pop Mus Popular music

Rock Mus Contemporary modern music

Easy Mus Easy listening music

Oth Mus Non-categorized music

Jazz Jazz

Country Country music

Nat Mus National music

Oldies Oldies, golden oldies

Folk mus Folk music

Classics L. Class Light classical music

Classic Classical music

Others Educate Educational programs

Drama Radio plays and serials

Culture National or regional culture

Science Nature, science and technology

Varied Light entertainment

Children Children’s

Social Social affairs

Religion Religious affairs or services

Phone In Phone in

Touring Travel programs; not for traffic announcements

Leisure Hobbies and recreational activities

Document Documentaries

Section

English

132

Section

Built-in CD Player

Playing a CD

These are the basic steps necessary to play a CD with your built-in CD player. More advanced CD operation is explained starting on the next page.

1 Track number indicator

Shows the track number currently playing.

2 Play time indicator

Shows the elapsed playing time of the current track.

3 Disc title indicator

Shows the title of the currently playing disc. ! If no title has been entered for the cur-

rently playing disc, nothing is displayed.

1 Press SOURCE to select the built-in CD player.

Press SOURCE until you see Compact Disc displayed.

# If no disc is loaded in the unit, you cannot select Compact Disc (built-in CD player). Insert a disc in the unit. (Refer to page 17.)

2 To perform fast forward or reverse, push and hold MULTI-CONTROL left or right.

# If you select Rough search, pushing and hold- ing MULTI-CONTROL left or right enables you to search every 10 tracks in the current disc. (Refer to Selecting the search method on page 30.)

3 To skip back or forward to another track, push MULTI-CONTROL left or right.

Pushing MULTI-CONTROL right skips to the start of the next track. Pushing MULTI-CONTROL left once skips to the start of the current track. Pushing again will skip to the previous track.

Note

When a CD TEXT disc is inserted, the disc title automatically begins to scroll in the display. When Ever Scroll is set to ON at the initial setting, the disc title scrolls continuously. Refer to Switch- ing the Ever Scroll on page 97.

Selecting a track directly

When using the remote control, you can select a track directly by entering the desired track number.

1 Press DIRECT.

Track number input display appears.

2 Press 0–9 buttons to enter the desired track number.

# You can cancel the input number by pressing

CLEAR.

3 Press DIRECT.

The track of entered number will play.

Note

After entering the number input mode, if you do not perform an operation within about eight seconds, the mode is automatically canceled.

Built-in CD Player

Section

English

Introduction of advanced built-in CD player operation

1 Function display

Shows the function status.

1 Press MULTI-CONTROL to display the main menu. FUNCTION, AUDIO and ENTERTAINMENT

appear on the display.

2 Use MULTI-CONTROL to select FUNCTION.

Turn to change the menu option; press to select. The function name appears on the display.

3 Turn MULTI-CONTROL to select the function.

Turn MULTI-CONTROL clockwise or counterclockwise to switch between the functions in the following order: Play mode (repeat play)—Random mode (random play)—Scan mode (scan play)— Pause (pause)—Search mode (search method)—Title Input (disc title input)—Jacket art (jacket art read)

# To return to the playback display, press BAND.

Notes

! When playing a CD TEXT disc, you cannot

switch to Title Input. The disc title will have already been recorded on a CD TEXT disc.

! When playing audio data (CD-DA), it is not ef-

fective even if you turn Jacket art on. (Refer to page 38.)

! If you do not operate the function within about

30 seconds, the display is automatically returned to the playback display.

Repeating play

There are two repeat play ranges for the builtin CD player: Disc repeat (disc repeat) and

Track repeat (one-track repeat).

1 Use MULTI-CONTROL to select Play mode in the function menu. Play mode appears in the display.

2 Press MULTI-CONTROL to select the repeat range.

Press MULTI-CONTROL repeatedly until the desired repeat range appears in the display.

! Disc repeat – Repeat the current disc ! Track repeat – Repeat just the current

track

Note

If you perform track search or fast forward/reverse during Track repeat, the repeat play range changes to Disc repeat.

Playing tracks in random order

Random play lets you play back tracks on the CD in a random order.

1 Use MULTI-CONTROL to select Random mode in the function menu. Random mode appears in the display.

2 Press MULTI-CONTROL to turn random play on.

Tracks will play in a random order.

# To turn random play off, press MULTI-CONTROL again.

Section

Built-in CD Player

Scanning tracks of a CD

Scan play lets you hear the first 10 seconds of each track on the CD.

1 Use MULTI-CONTROL to select Scan mode in the function menu. Scan mode appears in the display.

2 Press MULTI-CONTROL to turn scan play on.

The first 10 seconds of each track is played.

3 When you find the desired track press MULTI-CONTROL to turn scan play off.

The track will continue to play.

# If the display has automatically returned to the playback display, select Scan mode again by using MULTI-CONTROL.

Note

After scanning of a CD is finished, normal playback of the tracks will begin again.

Pausing CD playback

Pause lets you temporarily stop playback of the CD.

1 Use MULTI-CONTROL to select Pause in the function menu. Pause appears in the display.

2 Press MULTI-CONTROL to turn pause on.

Playback of the current track pauses.

# To turn pause off, press MULTI-CONTROL again.

Selecting the search method

You can switch the search method between fast forward/reverse and searching every 10 tracks.

1 Use MULTI-CONTROL to select Search mode in the function menu. Search mode appears in the display.

2 Press MULTI-CONTROL to select the search method.

Press MULTI-CONTROL until the desired search method appears in the display.

! FF/REV – Fast forward and reverse ! Rough search – Searching every 10

tracks

Searching every 10 tracks in the current disc

If a disc contains over 10 tracks, you can search every 10 tracks. When a disc contains many tracks, you can roughly search for the track you want to play.

1 Select the search method Rough search.

Refer to Selecting the search method on this page.

2 Push and hold MULTI-CONTROL left or right to search every 10 tracks on a disc.

# If a disc contains less than 10 tracks, pushing and holding MULTI-CONTROL right recalls the last track of the disc. Also, if the remaining number of tracks after searching every 10 tracks is less than 10, pushing and holding MULTI-CONTROL right recalls the last track of the disc.

+ 203 hidden pages