Pioneer DEHP-9800BT Operating Instruction

Page 1

Operation Manual Mode d’emploi

Multi-CD control DSP High power CD/MP3/WMA/ AAC player with Bluetooth Wireless Technology and FM/AM tuner

Syntoniseur FM/AM et lecteur de CD/MP3/WMA/ AAC, “Puissance élevée”, avec contrôleur pour lecteur de CD à chargeur et DSP, avec technologie sans fil Bluetooth

DEH-P9800BT

English Français

Page 2

Contents

Thank you for buying this Pioneer product.

Please read through these operating instructions so you will know how to operate your model properly. After you have finished reading the instructions, keep this man-

ual in a safe place for future reference.

Before You Start

Information to User 7 For Canadian model 7 About this unit 7

– Operating environment 8 About this manual 8 After-sales service for Pioneer products 8 Product registration 9 Features 9 About WMA 10 About AAC 10 About Bluetooth 10 About the SAT RADIO READY mark 11 Resetting the microprocessor 11 Clearing all memory 11 Protecting your unit from theft 12

– Removing the front panel 12

– Attaching the front panel 12

About the demo mode 12

– Reverse mode 13

– Feature demo mode 13

Use and care of the remote control 13

– Installing the battery 13

– Using the remote control 13

– FUNCTION button and AUDIO

button 14

What’s What

Head unit 15 Remote control 15

Basic Operations

Turning the unit on 17 Selecting a source 17 Loading a disc 17 Adjusting the volume 18 Turning the unit off 18

Tuner

Listening to the radio 19 Introduction of advanced tuner

operation 20

Storing and recalling broadcast

frequencies 20

Storing the strongest broadcast

frequencies 20

Selecting stations from the preset channel

list 21

Tuning in strong signals 21

Built-in CD Player

Playing a CD 22 Selecting a track directly 22 Introduction of advanced built-in CD player

operation 23 Repeating play 23 Playing tracks in random order 23 Scanning tracks of a CD 24 Pausing CD playback 24 Selecting the search method 24 Searching every 10 tracks in the current

disc 24 Using disc title functions 25

– Entering disc titles 25 – Displaying disc titles 26

Using CD TEXT functions 26

– Displaying text information on CD TEXT

discs 26

– Scrolling text information in the

display 26

– Selecting tracks from the track title

list 26

MP3/WMA/AAC/WAV Player

Playing MP3/WMA/AAC/WAV files 27 Selecting a track directly in the current

folder 28

Page 3

Contents

English

Introduction of advanced built-in CD player

(MP3/WMA/AAC/WAV) operation 29 Repeating play 29 Playing tracks in random order 29 Scanning folders and tracks 30 Pausing MP3/WMA/AAC/WAV playback 30 Selecting the search method 30 Searching every 10 tracks in the current

folder 30 Displaying text information on MP3/WMA/

AAC/WAV disc 31

– When playing back an MP3/WMA/AAC

disc 31

– When playing back a WAV disc 31 Scrolling text information in the display 31 Selecting tracks from the file name list 32 Displaying jacket arts on CD-ROM discs 32

– Reading jacket arts 32

– Selecting folders with jacket arts 33

Bluetooth Telephone

Hands-free phoning with cellular phones

featuring Bluetooth wireless technology 34

About the telephone source 35

– Standby mode 35 Setting up for hands-free phoning 35 Basic operation of hands-free phoning 36

– Making a phone call 36

– Taking a phone call 37

Introduction of advanced hands-free phoning

operation 38

Connecting a cellular phone 38

– Searching for available cellular

phones 39

– Using a cellular phone to initiate a

connection 39 Disconnecting a cellular phone 40 Registering connected cellular phone 40

Deleting a registered phone 40 Connecting to a registered cellular

phone 41

– Connecting to a registered phone

manually 41

– Connecting to a registered phone

automatically 41

Using the Phone Book 42

– Transferring entries to the Phone

Book 42

– Changing the Phone Book display

order 43

– Calling a number in the Phone

Book 43

– Assign genres to phone numbers 43 – Editing the name of a Phone Book

entry 44

– Editing phone numbers 45 – Selecting the icon of a Phone Book

entry 45

– Clearing a Phone Book entry 46 – Using preset numbers 46

Clearing memory 46 Using the Call History 47

– Displaying the Call History 47 – Calling a number from the Call

History 48

– Assigning preset numbers 48 Making a call by entering phone number 48 Echo canceling and noise reduction 49 Changing the ring tone 49 Setting the automatic rejecting 50 Setting the automatic answering 50 Selecting the icon for user phone 50 Displaying BD (Bluetooth Device)

address 50

– Displaying BD address of your cellular

phone 51

– Displaying BD address of this unit 51

Page 4

Contents

Displaying system version for repair 51

Bluetooth Audio

Listening to songs on BT Audio (Bluetooth

audio player) 52 Setting up for Bluetooth audio player 52 Connecting a Bluetooth audio player 53 Function operation 54 Playing songs on Bluetooth audio player 54 Pausing a song 54 Stopping playback 54 Disconnecting a Bluetooth audio player 55 Displaying BD address of this unit 55 Displaying system version for repair 55

Multi-CD Player

Playing a CD 56 Selecting a track directly 56 50-disc multi-CD player 57 Introduction of advanced multi-CD player

operation 57 Repeating play 58 Playing tracks in random order 58 Scanning CDs and tracks 58 Pausing CD playback 59 Using ITS playlists 59

– Creating a playlist with ITS

programming 59

– Playback from your ITS playlist 59 – Erasing a track from your ITS

playlist 60

– Erasing a CD from your ITS playlist 60

Using disc title functions 60

– Entering disc titles 60 – Displaying disc titles 61 – Selecting discs from the disc title

list 61

Using CD TEXT functions 61

– Displaying text information on CD TEXT

discs 62

– Scrolling text information in the

display 62

– Selecting tracks from the track title

list 62

Playing songs on iPod

Listening to songs on your iPod 63 Browsing for a song 63

– Searching for a song 64 – Selecting a playlist 64

Displaying text information on iPod 64 Introduction of advanced iPod adapter

operation 65

Repeating play 65 Playing songs in a random order

(shuffle) 65

Pausing a song 66

XM tuner

Listening to XM Satellite Radio 67 Selecting an XM channel directly 67 Introduction of advanced XM tuner

operation 68 Switching the XM display 68 Storing and recalling broadcast stations 68 Switching the XM channel select mode 68

– Selecting a channel in the channel

category 69

Displaying the Radio ID 69

– Channel number select setting 69 – Channel category select setting 69

Selecting stations from the preset channel

list 69

SIRIUS Satellite Radio tuner

Listening to SIRIUS Satellite Radio 70 Selecting a SIRIUS channel directly 70

Page 5

Contents

English

Introduction of advanced SIRIUS tuner

operation 71 Switching the SIRIUS display 71 Switching the scroll setting 71 Storing and recalling broadcast stations 71 Selecting the SIRIUS channel select

mode 72

– Selecting a channel in the channel

category 72

Displaying the Radio ID 72

TV tuner

Watching the television 73 Introduction of advanced TV tuner

operation 74 Storing and recalling broadcast stations 74 Storing the strongest broadcast stations

sequentially 74 Selecting stations from the preset channel

list 75

DVD Player

Playing a disc 76 Selecting a disc 76 Selecting a folder 76 Introduction of advanced DVD player

operation 77 Repeating play 77 Pausing disc playback 78 Playing tracks in random order 78 Scanning tracks of a CD/MP3/WMA 78 Using ITS playlist and disc title functions 78 Using disc title functions 78

– Entering disc titles 79

Audio Adjustments

Adjusting the audio easily 80 Adjusting the audio finely 80 Extra functions 80

Introduction of audio adjustments 80 Using the position selector 81 Using balance adjustment 81 Using the time alignment 82

– Adjusting the time alignment 82

Using subwoofer output 83

– Adjusting subwoofer settings 83 – Adjusting low pass filter attenuation

slope 83

Using the high pass filter 84

– Muting the speaker units (filters) 84 – Setting the high pass filter for front

speakers 84

– Setting the high pass filter for rear

speakers 85

Using the equalizer 85

– Recalling equalizer curves 85 – Adjusting equalizer curves 85 – Adjusting 16-band graphic

equalizer 86 Using BBE sound 86 Using compression and BMX 87 Adjusting loudness 87 Adjusting source levels 87 Using auditory user interface 88

Initial Settings

Adjusting initial settings 89 Selecting the display language 89 Setting the date 89 Setting the clock 90 Switching the warning tone 90 Switching the face auto open 90 Switching the auxiliary setting 91 Switching the dimmer setting 91 Adjusting the brightness 91 Correcting distorted sound 91 Switching the sound muting/attenuation 91 Switching the feature demo 92

Page 6

Contents

Switching the reverse mode 92 Switching the Ever Scroll 92 Calibrating the RPMs 93 Activating the BT Audio source 93 Entering PIN code for Bluetooth wireless

connection 93

Resetting the Bluetooth wireless technology

module 94

Other Functions

Turning the clock display on or off 95 Using the AUX source 95

– About AUX1 and AUX2 95 – Selecting AUX as the source 95 – Setting the AUX title 95

Using different entertainment displays 96

– Setting the entertainment display 96 – Setting the background display 97

Rewriting the entertainment displays and the

icons for telephone functions 98

Additional Information

Understanding built-in CD player error

messages 99

Understanding error message on rewriting

the entertainment displays 99 CD player and care 99 CD-R/CD-RW discs 100 Dual Discs 100 MP3, WMA, AAC and WAV files 101

– MP3 additional information 101 – WMA additional information 102 – AAC additional information 102 – WAVadditional information 102

About folders and MP3/WMA/AAC/WAV

files 102 Terms 104 Specifications 106

Page 7

Before You Start

Section

English

Information to User

FCC ID: AJDK012 MODEL NO.: DEH-P9800BT IC: 775E-JK012 This device complies with Part 15 of FCC Rules and RSS-Gen of IC Rules. Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of this device. MADE IN THAILAND

This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment dose cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

! Reorient or relocate the receiving antenna. ! Increase the separation between the equip-

ment and receiver.

! Connect the equipment into an outlet on a

circuit different from that to which the receiver is connected.

! Consult the dealer or an experienced radio/

TV technician for help.

Alteration or modifications carried out without appropriate authorization may invalidate the user’s right to operate the equipment.

! This transmitter must not be co-located or op-

erated in conjunction with any other antenna or transmitter.

! This equipment complies with FCC/IC radia-

tion exposure limits set forth for uncontrolled equipment and meets the FCC/IC radio frequency (RF) Exposure Guidelines in Supplement C to OET65 and RSS-102 of the IC radio frequency (RF) exposure rules. This equipment has very low levels of RF energy that it is deemed to comply without testing of specific absorption ratio (SAR).

For Canadian model

Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

This Class B digital apparatus complies with Canadian ICES-003.

About this unit

The tuner frequencies on this unit are allocated for use in North America. Use in other areas may result in poor reception.

Page 8

Section

Before You Start

WARNING:

Handling the cord on this product or cords associated with accessories sold with the product may expose you to chemicals listed on proposition 65 known to the State of California and other governmental entities to cause cancer and birth defects or other reproductive harm. Wash hands after handling.

CAUTION: USE OF CONTROL OR ADJUSTMENT OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE.

CAUTION: THE USE OF OPTICAL INSTRUMENTS WITH THIS PRODUCT WILL INCREASE EYE HAZARD.

CAUTION

! Do not allow this unit to come into contact

with liquids. Electrical shock could result. Also, this unit damage, smoke, and overheat could result from contact with liquids.

! Keep this manual handy as a reference for op-

erating procedures and precautions.

! Always keep the volume low enough so that

you can hear sounds from outside the vehicle.

! Protect this unit from moisture. ! If the battery is disconnected or discharged,

the preset memory will be erased and must be reprogrammed.

Important (Serial number)

The serial number is located on the bottom of this unit. For your own security and convenience, be sure to record this number on the enclosed warranty card.

Operating environment

This unit should be used within the temperature ranges shown below. Operating temperature range: –10 °C to +60 °C (14 °F to 140 °F) EN300328 ETC test temperature: –20 °C and +55 °C (–4 °F and 131 °F)

About this manual

This unit features a number of sophisticated functions ensuring superior reception and operation. All the functions have been designed for the easiest possible use, but many are not self-explanatory. This operation manual will help you benefit fully from this unit’s potential and to maximize your listening enjoyment. We recommend that you familiarize yourself with the functions and their operation by reading through the manual before you begin using this unit. It is especially important that you read and observe WARNINGs and CAU- TIONs in this manual.

After-sales service for Pioneer products

Please contact the dealer or distributor from where you purchased this unit for after-sales service (including warranty conditions) or any other information. In case the necessary information is not available, please contact the companies listed below: Please do not ship your unit to the companies at the addresses listed below for repair without advance contact.

Page 9

Before You Start

Section

English

U.S.A.

Pioneer Electronics (USA) Inc. CUSTOMER SUPPORT DIVISION P.O. Box 1760 Long Beach, CA 90801-1760 800-421-1404

CANADA

Pioneer Electronics of Canada, Inc. CUSTOMER SATISFACTION DEPARTMENT 300 Allstate Parkway Markham, Ontario L3R OP2 1-877-283-5901

For warranty information please see the Limited Warranty sheet included with this unit.

Product registration

Visit us at the following site:

1 Register your product. We will keep the details

of your purchase on file to help you refer to this information in the event of an insurance claim such as loss or theft.

2 Receive updates on the latest products and

technologies.

3 Download owner’s manuals, order product

catalogues, research new products, and much more.

MP3 file playback

You can play back MP3 files recorded on CDROM/CD-R/CD-RW (ISO9660 Level 1/Level 2 standard recordings). ! Supply of this product only conveys a li-

cense for private, non-commercial use and does not convey a license nor imply any right to use this product in any commercial (i.e. revenue-generating) real time broadcasting (terrestrial, satellite, cable and/or any other media), broadcasting/streaming via internet, intranets and/or other networks or in other electronic content distribution systems, such as pay-audio or audio-on-demand applications. An independent license for such use is required. For details, please visit http://www.mp3licensing.com.

WMA file playback

You can play back WMA files recorded on CDROM/CD-R/CD-RW (ISO9660 Level 1/Level 2 standard recordings).

AAC file playback

You can play back AAC files recorded on CDROM/CD-R/CD-RW (ISO9660 Level 1/Level 2 standard recordings).

WAV file playback

You can play back WAV files recorded on CD ROM/CD-R/CD-RW (Linear PCM (LPCM)/MS ADPCM recordings).

Hands-free phoning

This unit realizes effortless hands-free phoning with Bluetooth wireless technology.

Features

CD playback

Music CD/CD-R/CD-RW playback is possible.

Bluetooth audio player compatibility

When you use this unit with a Bluetooth audio player featuring Bluetooth wireless technology, you can control the Bluetooth audio player.

Page 10

Section

Before You Start

iPod®compatibility

When you use this unit with a Pioneer iPod adapter (CD-IB100), you can control an iPod with Dock Connector. ! iPod is a trademark of Apple Computer,

Inc., registered in the U.S. and other countries.

About WMA

The Windows Media™ logo printed on the box indicates that this unit can play back WMA data. WMA is short for Windows Media Audio and refers to an audio compression technology that is developed by Microsoft Corporation. WMA data can be encoded by using Windows Media Player version 7 or later. Windows Media and the Windows logo are trademarks or registered trademarks of Microsoft Corporation in the United States and/or other countries.

Notes

! This unit may not operate correctly depending

on the application used to encode WMA files.

! Depending on the version of Windows Media

Player used to encode WMA files, album names and other text information may not be correctly displayed.

! There may be a slight delay when starting

playback of WMA files encoded with image data.

About AAC

AAC is short for Advanced Audio Coding and refers to an audio compression technology standard used with MPEG 2 and MPEG 4. Several applications can be used to encode AAC files, but file formats and extensions differ depending on the application which is used to encode. This unit plays back AAC files encoded by

iTunes

version 4.8 and earlier. iTunes is a trademark of Apple Computer, Inc., registered in the U.S. and other countries.

About Bluetooth

Bluetooth is a short-range wireless radio connectivity technology that is developed as a cable replacement for mobile phones, handheld PCs and other devices. Bluetooth operates in 2.4 GHz frequency range and transmits voice and data at speeds up to 1 megabit per second. Bluetooth was launched by a special interest group (SIG) that comprises of Ericsson Inc., Intel Corp., Nokia Corp., Toshiba and IBM in 1998, and it is currently developed by nearly 2 000 companies worldwide. ! The Bluetooth word mark and logos are

owned by the Bluetooth SIG, Inc. and any use of such marks by Pioneer Corporation is under license. Other trademarks and trade names are those of their respective owners.

Page 11

Before You Start

Section

English

About the SAT RADIO READY mark

The SAT RADIO READY mark printed on the front panel indicates that the Satellite Radio Tuner for Pioneer (i.e., XM tuner and Sirius satellite tuner which are sold separately) can be controlled by this unit. Please inquire to your dealer or nearest authorized Pioneer service station regarding the satellite radio tuner that can be connected to this unit. For satellite radio tuner operation, please refer to the satellite radio tuner owner’s manual.

Notes

! The system will use direct satellite-to-receiver

broadcasting technology to provide listeners in their cars and at home with crystal-clear sound seamlessly from coast to coast. Satellite radio will create and package over 100 channels of digital-quality music, news, sports, talk and children’s programming.

! “SAT Radio”, the SAT Radio logo and all re-

lated marks are trademarks of Sirius Satellite Radio inc., and XM Satellite Radio Inc.

% Press RESET with a pen tip or other pointed instrument.

RESET button

Clearing all memory

To protect personal and private information, data about the phone stored in this unit can be deleted.

1 Press SOURCE and hold until the unit turns off.

2 Press MULTI-CONTROL and hold until Language select appears in the display.

3 Turn MULTI-CONTROL to select Phone reset. Phone reset appears in the display.

Resetting the microprocessor

The microprocessor must be reset under the following conditions: ! Prior to using this unit for the first time

after installation

! If the unit fails to operate properly ! When strange or incorrect messages ap-

pear on the display

4 Push MULTI-CONTROL right to show a confirmation display. Clear memory YES is displayed. Clearing

memory is now on standby.

# If you do not want to reset phone memory, press BAND.

5 Press MULTI-CONTROL to clear the memory.

All data in the telephone source, including Phone Book entries, number presets and the Call History is cleared.

Page 12

Section

Before You Start

Protecting your unit from theft

The front panel can be detached from the head unit and stored in the provided protective case to prevent thef t. ! If the front panel is not detached from the

head unit within five seconds of turning off the ignition, a warning tone will sound and the front panel will open.

! You can turn off the warning tone. See

Switching the warning tone on page 90.

! You can turn off the face auto open. See

Switching the face auto open on page 90.

Important

! Never use force or grip the display and the

buttons too tightly when removing or attaching.

! Avoid subjecting the front panel to excessive

shocks.

! Keep the front panel out of direct sunlight and

high temperatures.

! A few seconds after turning the ignition

switch to on or off, the front panel automatically moves. When this happens, your fingers may become jammed in the panel, so keep your hands away from it.

2 Slide and remove the front panel toward you.

Take care not to grip it too tightly or to drop the front panel and protect it from contact with water or other fluids to prevent permanent damage.

3 Put the front panel into provided protective case for safe keeping.

Attaching the front panel

1 Make sure the inner cover is closed.

2 Replace the front panel by clipping it into place.

Removing the front panel

1 Press and hold EJECT to open the front panel.

About the demo mode

This unit features two demonstration modes. One is the reverse mode, the other is the feature demo mode.

Page 13

Before You Start

Important

The red lead (ACC) of this unit should be connected to a terminal coupled with ignition switch on/off operations. If this is not done, the vehicle battery may be drained.

Reverse mode

If you do not perform an operation within about 30 seconds, screen indications start to reverse, and then continue reversing every 10 seconds. Pressing BAND when power to this unit is turned off while the ignition switch is set to ACC or ON cancels the reverse mode. Press BAND again to start the reverse mode.

Feature demo mode

The feature demo automatically starts when power to this unit is turned off while the ignition switch is set to ACC or ON. Pressing DISPLAY during feature demo operation cancels the feature demo mode. Press DISPLAY again to start the feature demo mode. Remember that if the feature demo continues operating when the car engine is turned off, it may drain battery power.

Section

English

WARNING

Keep the battery out of the reach of children. Should the battery be swallowed, immediately consult a doctor.

CAUTION

! Use only one CR2025 (3 V) lithium battery. ! Remove the battery if the remote control is not

used for a month or longer.

! Do not recharge, disassemble, heat or dispose

of the battery in fire.

! Do not handle the battery with metallic tools. ! Do not store the battery with metallic materi-

als.

! In the event of battery leakage, wipe the re-

mote control completely clean and install a new battery.

! When disposing of used batteries, please

comply with governmental regulations or environmental public institutions’ rules that apply in your country/area.

Use and care of the remote control

Installing the battery

Slide the tray out on the back of the remote control and insert the battery with the plus (+) and minus (–) poles pointing in the proper direction. ! When using for the first time, pull out the

film protruding from the tray.

Using the remote control

Point the remote control in the direction of the front panel to operate. ! The remote control may not function prop-

erly in direct sunlight.

Important

! Do not store the remote control in high tem-

peratures or direct sunlight.

! Do not let the remote control fall onto the

floor, where it may become jammed under the brake or accelerator pedal.

Page 14

Section

Before You Start

FUNCTION button and AUDIO button

You can also select the desired mode by FUNCTION button and AUDIO button on the remote control. But operation of FUNCTION button and AUDIO button on the remote control differs from the operation of MULTI-CONTROL on the head unit. When operating the remote control, switch through the modes as described below to select the mode.

FUNCTION button operation

% Press FUNCTION to select the desired mode (e.g., built-in CD player).

Press FUNCTION repeatedly to switch between the following modes: Play mode (repeat play)—Random mode (random play)—Scan mode (scan play)— Pause (pause)—Search mode (search method)—Title Input (disc title input)—Jacket art (jacket art read)

Note

Refer to Introduction of advanced built-in CD player operation on page 23.

AUDIO button operation

% Press AUDIO to select the desired mode.

Press AUDIO repeatedly to switch between the following modes: Fader (balance adjustment)—Position (position selector)—TA Mode (time alignment setting)—Time Alignment (time alignment adjusting)—Loudness (loudness)—Powerful (graphic equalizer adjustment)—FREQ. (16band graphic equalizer adjustment)—

Subwoofer1 (subwoofer on/off)— Subwoofer2 (subwoofer cut-off frequency)— Subwoofer3 (subwoofer slope)—Front HPF

(front high pass filter slope)— Front HPF FREQ. (front high pass filter cut-off frequency)—Rear HPF (rear high pass filter

slope)—Rear HPF FREQ. (rear high pass filter cut-off frequency)—BBE (BBE)—COMP/BMX (Compression and BMX)—SLA (source level adjustment)—AUI sound level (auditory user interface)

Note

Refer to Introduction of audio adjustments on page 80.

Page 15

What’s What

Section

English

Head unit

1 EQ button

Press to select various equalizer curves.

2 Connection status indicator

Lights up when your cellular phone is connected via Bluetooth wireless technology.

3 DISPLAY button

Press to select different displays.

4 CLOCK button

Press to change to the clock display.

5 PHONE button

Press to select the phone as the source. While operating a phone source, press to end a call, reject an incoming call or cancel making a call.

6 MULTI-CONTROL

Move to perform manual seek tuning, fast forward, reverse and track search controls. Also used for controlling functions. Turn to increase or decrease the volume.

7 LIST button

Press to display the disc title list, track title list, folder list, file list or preset channel list depending on the source.

8 RESET button

Press to reset the microprocessor.

9 BAND button

Press to select among three FM bands and one AM band and to cancel the control mode of functions.

a SOURCE button

This unit is turned on by selecting a source. Press to cycle through all the available sources.

b EJECT button

Press to eject a CD from your built-in CD player. Press and hold to open or close the front panel.

Remote control

Operation is the same as when using the buttons on the head unit.

c VOLUME buttons

Press to increase or decrease the volume.

d FUNCTION button

Press to select functions.

Page 16

c9d

Section

What’s What

j ON HOOK button

While operating the phone source, press to end a call or reject an incoming call.

k ATT button

Press to quickly lower the volume level, by about 90%. Press once more to return to the original volume level.

l ENTERTAINMENT button

Press to change to the entertainment display.

m AUDIO button

Press to select various sound quality controls.

e Joystick

Move to perform manual seek tuning, fast forward, reverse and track search controls. Also used for controlling functions. Functions are the same as MULTI-CONTROL except for volume control.

f DIRECT button

Press to directly select the desired track.

g CLEAR button

Press to cancel the input number when 0–9 are used.

h 0–9 buttons

Press to directly select the desired track, preset tuning or disc. Buttons 1–6 can operate the preset tuning for the tuner or disc number search for the multi-CD player.

i OFF HOOK button

Press to start talking on the phone while operating a phone source.

Page 17

Basic Operations

Section

English

Turning the unit on

% Press SOURCE to turn the unit on.

When you select a source, the unit is turned on.

Selecting a source

You can select a source you want to listen to. To switch to the built-in CD player, load a disc in the unit (refer to page 22).

% Press SOURCE to select a source.

Press SOURCE repeatedly to switch between the following sources:

XM tuner—SIRIUS tuner—Tuner—Television—DVD player/Multi-DVD player— Built-in CD player—Multi-CD player— iPod—External unit 1—External unit 2— AUX1—AUX2—Telephone—BT Audio

Notes

! In the following cases, the sound source will

not change: — When there is no unit corresponding to the

selected source connected to this unit.

— When there is no disc in the unit. — When there is no disc in the DVD player. — When there is no magazine in the multi-

CD player.

— When there is no magazine in the multi-

DVD player.

— When the AUX (auxiliary input) is set to off

(refer to page 91).

— When the BT Audio source is set to off

(refer to Activating the BT Audio source on page 93).

! External unit refers to a Pioneer product (such

as one available in the future) that, although incompatible as a source, enables control of basic functions by this unit. Two external units can be controlled by this unit. When two external units are connected, the allocation of

them to external unit 1 or external unit 2 is automatically set by this unit.

! When this unit’s blue/white lead is connected

to the vehicle’s auto-antenna relay control terminal, the vehicle’s antenna extends when this unit’s source is turned on. To retract the antenna, turn the source off.

Loading a disc

1 Press EJECT to open the front panel.

CD loading slot appears.

# After a CD has been inserted, press SOURCE to select the built-in CD player.

2 Insert a CD into the CD loading slot.

Front panel is closed automatically, and playback will start.

! With jacket art function on, jacket arts on

CD-ROM disc are automatically read in this unit when the disc is inserted. To cancel reading jacket arts, press BAND. For details, refer to Reading jacket arts on page 32.

CD loading slot

# You can eject a CD by pressing EJECT.

Notes

! The built-in CD player plays one standard, 12-

cm or 8-cm CD at a time. Do not use an adapter when playing 8-cm CDs.

! Do not insert anything other than a CD into

the CD loading slot.

Page 18

Section

Basic Operations

! There is sometimes a delay between starting

up CD playback and the sound being issued. When being read, Format read is displayed.

! If you cannot insert a disc completely or if

after you insert a disc the disc does not play, check that the label side of the disc is up. Press EJECT to eject the disc, and check the disc for damage before inserting it again.

! When the CD loading or ejecting function

does not operate properly, you can eject the CD by pressing and holding EJECT while opening the front panel.

! If an error message such as ERROR-11 is dis-

played, refer to Understanding built-in CD player error messages on page 99.

Adjusting the volume

% Use MULTI-CONTROL to adjust the sound level.

With the head unit, turn MULTI-CONTROL to increase or decrease the volume. With the remote control, press VOLUME to increase or decrease the volume.

Turning the unit off

% Press SOURCE and hold until the unit turns off.

Page 19

43521

Tuner

Section

English

Listening to the radio

These are the basic steps necessary to operate the radio. More advanced tuner operation is explained starting on the next page.

1 Stereo (5) indicator

Shows when the selected frequency is being broadcast in stereo.

2 LOC indicator

Shows when local seek tuning is on.

3 Band indicator

Shows which band the radio is tuned to, AM or FM.

4 Preset number indicator

Shows which preset has been selected.

3 To perform manual tuning, push MULTI-CONTROL left or right.

The frequencies move up or down step by step.

4 To perform seek tuning, push and hold MULTI-CONTROL left or right for about one second and release.

The tuner will scan the frequencies until a broadcast strong enough for good reception is found.

# You can cancel seek tuning by pushing MULTI-CONTROL left or right. # If you push and hold MULTI-CONTROL left or right you can skip stations. Seek tuning starts as soon as you release MULTI-CONTROL.

5 Frequency indicator

Shows the frequency to which the tuner is tuned.

6 Signal level indicator

Shows the radio wave strength.

1 Press SOURCE to select the tuner. Press SOURCE until you see Tuner displayed.

2 Press BAND to select a band. Press BAND until the desired band (FM-1, FM-2, FM-3 for FM or AM) is displayed.

Page 20

Section

Tuner

Introduction of advanced tuner operation

1 Function display

Shows the function status.

1 Press MULTI-CONTROL to display the main menu. FUNCTION, AUDIO and ENTERTAINMENT

appear on the display.

2 Use MULTI-CONTROL to select FUNCTION.

Turn to change the menu option; press to select. The function name appears on the display.

3 Turn MULTI-CONTROL to select the function.

Turn MULTI-CONTROL clockwise or counterclockwise to switch between the functions in the following order: BSM (best stations memory)—Local (local seek tuning)

# To return to the frequency display, press BAND.

Note

If you do not operate the function within about 30 seconds, the display is automatically returned to the frequency display.

Storing and recalling broadcast frequencies

You can easily store up to six broadcast frequencies for later recall.

1 When you find a frequency that you want to store in memory press LIST to switch to the preset channel list mode.

2 Use MULTI-CONTROL to store the selected frequency in memory.

Turn to change the preset number; press and hold to store. The preset number you have selected will flash and then remain lit. The selected radio station frequency has been stored in memory.

# If you do not operate the list within about 30 seconds, the preset channel list mode is canceled automatically.

Notes

! Up to 18 FM stations, six for each of the three

FM bands, and six AM stations can be stored in memory.

! You can also store radio station frequencies

assigned to preset tuning numbers by pressing and holding one of the preset tuning buttons 1–6 on the remote control.

Storing the strongest broadcast frequencies

BSM (best stations memory) lets you automatically store the six strongest broadcast frequencies under preset tuning buttons 1–6. Once stored you can tune in to those frequencies with the touch of button.

1 Use MULTI-CONTROL to select BSM in the function menu. BSM appears in the display.

Page 21

Tuner

Section

English

2 Press MULTI-CONTROL to turn BSM on. Searching is displayed. While Searching is

displayed, the six strongest broadcast frequencies will be stored under preset tuning numbers 1–6 in the order of their signal strength. When finished, the preset channel list appears.

# To cancel the storage process, press

MULTI-CONTROL.

3 Use MULTI-CONTROL to select the desired station.

Turn to change the station; press to select.

# You can also change the station by pushing MULTI-CONTROL up or down.

Note

Storing broadcast frequencies with BSM may replace broadcast frequencies you have saved using buttons 1–6.

Selecting stations from the preset channel list

The preset channel list lets you see the list of preset stations and select one of them to receive.

1 Press LIST to switch to the preset channel list mode during the frequency display.

2 Use MULTI-CONTROL to select the desired station.

Turn to change the station; press to select.

# You can also change the station by pushing MULTI-CONTROL up or down. # If you do not operate the list within about 30 seconds, the preset channel list mode is canceled automatically.

Notes

! You can also recall radio station frequencies

assigned to preset tuning numbers by pushing MULTI-CONTROL up or down during the frequency display.

! You can also recall radio station frequencies

assigned to preset tuning numbers by pressing one of the preset tuning buttons 1–6 on the remote control.

Tuning in strong signals

Local seek tuning lets you tune in only those radio stations with sufficiently strong signals for good reception.

1 Use MULTI-CONTROL to select Local in the function menu. Local appears in the display.

2 Press MULTI-CONTROL to turn local seek tuning on.

Local seek sensitivity (e.g., Level 2) appears in the display.

# To turn local seek tuning off, press

MULTI-CONTROL again.

3 Push MULTI-CONTROL left or right to set the sensitivity.

There are four levels of sensitivity for FM and two levels for AM: FM: Level 1—Level 2—Level 3—Level 4 AM: Level 1—Level 2 The Level 4 setting allows reception of only the strongest stations, while lower settings let you receive progressively weaker stations.

Page 22

132

Section

Built-in CD Player

Playing a CD

These are the basic steps necessary to play a CD with your built-in CD player. More advanced CD operation is explained starting on the next page.

1 Track number indicator

Shows the track number currently playing.

2 Play time indicator

Shows the elapsed playing time of the current track.

3 Disc title indicator

Shows the title of the currently playing disc. ! If no title has been entered for the cur-

rently playing disc, nothing is displayed.

1 Press SOURCE to select the built-in CD player.

Press SOURCE until you see Compact Disc displayed.

# If no disc is loaded in the unit, you cannot select Compact Disc (built-in CD player). Insert a disc in the unit. (Refer to page 17.)

2 To perform fast forward or reverse, push and hold MULTI-CONTROL left or right.

# If you select Rough search, pushing and hold- ing MULTI-CONTROL left or right enables you to search every 10 tracks in the current disc. (Refer to Selecting the search method on page 24.)

3 To skip back or forward to another track, push MULTI-CONTROL left or right.

Pushing MULTI-CONTROL right skips to the start of the next track. Pushing MULTI-CONTROL left once skips to the start of the current track. Pushing again will skip to the previous track.

Note

When a CD TEXT disc is inserted, the disc title automatically begins to scroll in the display. When Ever Scroll is set to ON at the initial setting, the disc title scrolls continuously. Refer to Switch- ing the Ever Scroll on page 92.

Selecting a track directly

When using the remote control, you can select a track directly by entering the desired track number.

1 Press DIRECT.

Track number input display appears.

2 Press 0–9 buttons to enter the desired track number.

# You can cancel the input number by pressing

CLEAR.

3 Press DIRECT.

The track of entered number will play.

Note

After entering the number input mode, if you do not perform an operation within about eight seconds, the mode is automatically canceled.

Page 23

Built-in CD Player

Section

English

Introduction of advanced built-in CD player operation

1 Function display

Shows the function status.

1 Press MULTI-CONTROL to display the main menu. FUNCTION, AUDIO and ENTERTAINMENT

appear on the display.

2 Use MULTI-CONTROL to select FUNCTION.

Turn to change the menu option; press to select. The function name appears on the display.

3 Turn MULTI-CONTROL to select the function.

Turn MULTI-CONTROL clockwise or counterclockwise to switch between the functions in the following order: Play mode (repeat play)—Random mode (random play)—Scan mode (scan play)— Pause (pause)—Search mode (search method)—Title Input (disc title input)—Jacket art (jacket art read)

# To return to the playback display, press BAND.

Notes

! When playing a CD TEXT disc, you cannot

switch to Title Input. The disc title will have already been recorded on a CD TEXT disc.

! When playing audio data (CD-DA), it is not ef-

fective even if you turn Jacket art on. (Refer to page 32.)

! If you do not operate the function within about

30 seconds, the display is automatically returned to the playback display.

Repeating play

There are two repeat play ranges for the builtin CD player: Disc repeat (disc repeat) and

Track repeat (one-track repeat).

1 Use MULTI-CONTROL to select Play mode in the function menu. Play mode appears in the display.

2 Press MULTI-CONTROL to select the repeat range.

Press MULTI-CONTROL repeatedly until the desired repeat range appears in the display.

! Disc repeat – Repeat the current disc ! Track repeat – Repeat just the current

track

Note

If you perform track search or fast forward/reverse during Track repeat, the repeat play range changes to Disc repeat.

Playing tracks in random order

Random play lets you play back tracks on the CD in a random order.

1 Use MULTI-CONTROL to select Random mode in the function menu. Random mode appears in the display.

2 Press MULTI-CONTROL to turn random play on.

Tracks will play in a random order.

# To turn random play off, press MULTI-CONTROL again.

Page 24

Section

Built-in CD Player

Scanning tracks of a CD

Scan play lets you hear the first 10 seconds of each track on the CD.

1 Use MULTI-CONTROL to select Scan mode in the function menu. Scan mode appears in the display.

2 Press MULTI-CONTROL to turn scan play on.

The first 10 seconds of each track is played.

3 When you find the desired track press MULTI-CONTROL to turn scan play off.

The track will continue to play.

# If the display has automatically returned to the playback display, select Scan mode again by using MULTI-CONTROL.

Note

After scanning of a CD is finished, normal playback of the tracks will begin again.

Pausing CD playback

Pause lets you temporarily stop playback of the CD.

1 Use MULTI-CONTROL to select Pause in the function menu. Pause appears in the display.

2 Press MULTI-CONTROL to turn pause on.

Playback of the current track pauses.

# To turn pause off, press MULTI-CONTROL again.

Selecting the search method

You can switch the search method between fast forward/reverse and searching every 10 tracks.

1 Use MULTI-CONTROL to select Search mode in the function menu. Search mode appears in the display.

2 Press MULTI-CONTROL to select the search method.

Press MULTI-CONTROL until the desired search method appears in the display.

! FF/REV – Fast forward and reverse ! Rough search – Searching every 10

tracks

Searching every 10 tracks in the current disc

If a disc contains over 10 tracks, you can search every 10 tracks. When a disc contains many tracks, you can roughly search for the track you want to play.

1 Select the search method Rough search.

Refer to Selecting the search method on this page.

2 Push and hold MULTI-CONTROL left or right to search every 10 tracks on a disc.

# If a disc contains less than 10 tracks, pushing and holding MULTI-CONTROL right recalls the last track of the disc. Also, if the remaining number of tracks after searching every 10 tracks is less than 10, pushing and holding MULTI-CONTROL right recalls the last track of the disc.

Page 25

Built-in CD Player

Section

English

# If a disc contains less than 10 tracks, pushing and holding MULTI-CONTROL left recalls the first track of the disc. Also, if the remaining number of tracks after searching every 10 tracks is less than 10, pushing and holding MULTI-CONTROL left re- calls the first track of the disc.

Using disc title functions

You can input CD titles and display the title. The next time you insert a CD for which you have entered a title, the title of that CD will be displayed. Use the disc title input feature to store up to 48 CD titles in the unit. Each title can be up to 10 characters long. ! When playing a CD TEXT disc, you cannot

switch to disc title input display. The disc title will have already been recorded on a CD TEXT disc.

Entering disc titles

You can display the text information of any disc that has had a disc title entered.

1 Play the CD that you want to enter a title for.

4 Push MULTI-CONTROL up or down to select a letter of the alphabet.

Each time MULTI-CONTROL is pushed up, alphabet, numbers or symbols are displayed in ascending order (A B C ...). Each time MULTI-CONTROL is pushed down, letters are displayed in descending order.

5 Push MULTI-CONTROL right to move the cursor to the next character position.

When the letter you want is displayed, push MULTI-CONTROL right to move the cursor to the next position and then select the next letter. Push MULTI-CONTROL left to move backwards in the display.

6 Move the cursor to the last position by pushing MULTI-CONTROL right after entering the title.

When you push MULTI-CONTROL right one more time, the entered title is stored in memory.

7 Press BAND to return to the playback display.

2 Use MULTI-CONTROL to select Title Input in the function menu. Title Input appears in the display.

3 Press DISPLAY to select the desired character type.

Press DISPLAY repeatedly to switch between the following character types: Alphabet (upper case), numbers and symbols —Alphabet (lower case)—European letters, such as those with accents (e.g. á, à, ä, ç)— Numbers and symbols

Notes

! Titles remain in memory, even after the disc

has been removed from the unit, and are recalled when the disc is reinserted.

! After data for 48 discs has been stored in

memory, data for a new disc will overwrite the oldest one.

! If you connect a multi-CD player, you can

input disc titles for up to 100 discs.

! When a multi-CD player that does not support

disc title functions is connected, you cannot enter disc titles in this unit.

Page 26

Section

Built-in CD Player

Displaying disc titles

You can display the text information of any disc that has had a disc title entered.

% Press DISPLAY.

Press DISPLAY repeatedly to switch between the following settings:

: disc title—Simple display

Using CD TEXT functions

Some discs have certain information encoded on the disc during manufacture. These discs may contain such information as the CD title, track title, artist’s name and playback time and are called CD TEXT discs. Only these specially encoded CD TEXT discs support the functions listed below.

Displaying text information on CD TEXT discs

You can display the text information of any disc that has had a disc title entered.

% Press DISPLAY.

Press DISPLAY repeatedly to switch between the following settings:

: disc title— : disc artist name— : track

title—

track artist name—Simple display

# If specific information has not been recorded on a CD TEXT disc, title or name is not displayed.

: track artist name— : disc title and

: disc artist name— : track title and :

than 24 letters, you can scroll the text information as follows. ! When the source icon is turned off, this

unit can display the first 30 letters of text information.

% Press DISPLAY and hold until the text information begins to scroll through the display.

The titles scroll.

Note

When Ever Scroll is set to ON at the initial setting, text information scrolls continuously in the display. Refer to Switching the Ever Scroll on page 92.

Selecting tracks from the track title list

Track title list lets you see the list of track titles on a CD TEXT disc and select one of them to play back.

1 Press LIST to switch to the track title list mode.

2 Use MULTI-CONTROL to select the desired track title.

Turn to change the track title; press to play.

# You can also change the track title by pushing MULTI-CONTROL up or down. # If you do not operate the list within about 30 seconds, the track title list mode is canceled automatically.

Scrolling text information in the display

This unit can display the first 24 letters of disc title, disc artist name, track title and track artist name. When the text information is longer

Page 27

364

251

MP3/WMA/AAC/WAV Player

Section

English

Playing MP3/WMA/AAC/ WAV files

These are the basic steps necessary to play an MP3/WMA/AAC/WAV with your built-in CD player. More advanced MP3/WMA/AAC/WAV operation is explained starting on page 29.

1 MP3/WMA/AAC/WAV indicator

Shows the type of file currently playing.

2 Folder number indicator

Shows the folder number currently playing.

3 Track number indicator

Shows the track (file) number currently playing.

4 Play time indicator

Shows the elapsed playing time of the current track (file).

5 Bit rate/sampling frequency indicator

Shows the bit rate or sampling frequency of the current track (file).

6 Folder name indicator

Shows the name of the currently playing folder.

1 Press SOURCE to select the built-in CD player.

Press SOURCE until you see Compact Disc displayed.

# If no disc is loaded in the unit, you cannot select Compact Disc (built-in CD player). Insert a disc in the unit. (Refer to page 17.)

2 Push MULTI-CONTROL up or down to select a folder.

# You cannot select a folder that does not have an MP3/WMA/AAC/WAV file recorded in it. # To return to folder 01 (ROOT), press and hold BAND. However, if folder 01 (ROOT) contains no files, playback commences with folder 02.

3 To perform fast forward or reverse, push and hold MULTI-CONTROL left or right.

# If you select Rough search, pushing and hold- ing MULTI-CONTROL left or right enables you to search every 10 tracks in the current folder. (Refer to Selecting the search method on page 30.)

4 To skip back or forward to another track, push MULTI-CONTROL left or right.

Pushing MULTI-CONTROL right skips to the start of the next track. Pushing MULTI-CONTROL left once skips to the start of the current track. Pushing again will skip to the previous track.

Notes

! When playing discs with MP3/WMA/AAC/

WAV files and audio data (CD-DA) such as CD-EXTRA and MIXED-MODE CDs, both types can be played only by switching mode between MP3/WMA/AAC/WAVand CD-DA with BAND.

! If you have switched between playback of

MP3/WMA/AAC/WAV files and audio data (CD-DA), playback starts at the first track on the disc.

! The built-in CD player can play back an MP3/

WMA/AAC/WAV file recorded on CD-ROM. (Refer to page 101 for files that can be played back.)

Page 28

Section

MP3/WMA/AAC/WAV Player

! Playback is carried out in order of file number.

Folders are skipped if they contain no files. (If folder 01 (ROOT) contains no files, playback commences with folder 02.)

! When playing back files recorded as VBR

(variable bit rate) files, the play time will not be correctly displayed if fast forward or reverse operations are used.

! When playing back MP3 files recorded as VBR

(variable bit rate) files, the bit rate value is not displayed even after switching to bit rate. (VBR will be displayed.)

! When playing back WMA files recorded as

VBR (variable bit rate) files, the average bit rate value is displayed.

! There is no sound on fast forward or reverse. ! When an MP3/WMA/AAC/WAV disc is in-

serted, folder name automatically begins to scroll in the display. When Ever Scroll is set to ON at the initial setting, folder name scrolls continuously. About Ever Scroll, refer to Switching the Ever Scroll on page 92.

Selecting a track directly in the current folder

When using the remote control, you can select a track directly by entering the desired track number.

Note

After entering the number input mode, if you do not perform an operation within about eight seconds, the mode is automatically canceled.

1 Press DIRECT.

Track number input display appears.

2 Press 0–9 buttons to enter the desired track number.

# You can cancel the input number by pressing

CLEAR.

3 Press DIRECT.

The track of entered number will play.

Page 29

MP3/WMA/AAC/WAV Player

Section

English

Introduction of advanced built-in CD player (MP3/ WMA/AAC/WAV) operation

1 Function display

Shows the function status.

1 Press MULTI-CONTROL to display the main menu. FUNCTION, AUDIO and ENTERTAINMENT

appear on the display.

2 Use MULTI-CONTROL to select FUNCTION.

Turn to change the menu option; press to select. The function name appears on the display.

3 Turn MULTI-CONTROL to select the function.

# To return to the playback display, press BAND.

Repeating play

For MP3/WMA/AAC/WAV playback, there are three repeat play ranges: Folder repeat (folder repeat), Track repeat (one-track repeat) and

Disc repeat (repeat all tracks).

1 Use MULTI-CONTROL to select Play mode in the function menu. Play mode appears in the display.

2 Press MULTI-CONTROL to select the repeat range.

Press MULTI-CONTROL repeatedly until the desired repeat range appears in the display.

! Folder repeat – Repeat the current folder ! Track repeat – Repeat just the current

track

! Disc repeat – Repeat all tracks

Notes

! If you select another folder during repeat play,

the repeat play range changes to Disc repeat.

! If you perform track search or fast forward/re-

verse during Track repeat, the repeat play range changes to Folder repeat.

! When Folder repeat is selected, it is not pos-

sible to play back a subfolder of that folder.

Playing tracks in random order

Random play lets you play back tracks in a random order within the repeat range, Folder repeat and Disc repeat.

Note

If you do not operate the function within about 30 seconds, the display is automatically returned to the playback display.

1 Select the repeat range.

Refer to Repeating play on this page.

2 Use MULTI-CONTROL to select Random mode in the function menu. Random mode appears in the display.

Page 30

Section

MP3/WMA/AAC/WAV Player

3 Press MULTI-CONTROL to turn random play on.

Tracks will play in a random order within the previously selected Folder repeat or Disc repeat ranges.

# To turn random play off, press MULTI-CONTROL again.

Scanning folders and tracks

While you are using Folder repeat, the beginning of each track in the selected folder plays for about 10 seconds. When you are using Disc repeat, the beginning of the first track of each folder is played for about 10 seconds.

1 Select the repeat range.

Refer to Repeating play on the previous page.

2 Use MULTI-CONTROL to select Scan mode in the function menu. Scan mode appears in the display.

3 Press MULTI-CONTROL to turn scan play on.

The first 10 seconds of each track of the current folder (or the first track of each folder) is played.

4 When you find the desired track (or folder) press MULTI-CONTROL to turn scan play off.

The track (or folder) will continue to play.

# If the display has automatically returned to the playback display, select Scan mode again by using MULTI-CONTROL.

Note

After track or folder scanning is finished, normal playback of the tracks will begin again.

Pausing MP3/WMA/AAC/ WAV playback

Pause lets you temporarily stop playback of the MP3/WMA/AAC/WAV.

1 Use MULTI-CONTROL to select Pause in the function menu. Pause appears in the display.

2 Press MULTI-CONTROL to turn pause on.

Playback of the current track pauses.

# To turn pause off, press MULTI-CONTROL again.

Selecting the search method

You can switch the search method between fast forward/reverse and searching every 10 tracks.

1 Use MULTI-CONTROL to select Search mode in the function menu. Search mode appears in the display.

2 Press MULTI-CONTROL to select the search method.

Press MULTI-CONTROL until the desired search method appears in the display.

! FF/REV – Fast forward and reverse ! Rough search – Searching every 10

tracks

Searching every 10 tracks in the current folder

If the current folder contains over 10 tracks, you can search every 10 tracks. When one folder contains a lot of tracks, you can roughly search for the track you want to play.

Page 31

MP3/WMA/AAC/WAV Player

Section

English

1 Select the search method Rough search.

Refer to Selecting the search method on the previous page.

2 Push and hold MULTI-CONTROL left or right to search every 10 tracks in the current folder.

# If the current folder contains less than 10 tracks, pushing and holding MULTI-CONTROL right recalls the last track of the folder. Also, if the remaining number of tracks after searching every 10 tracks is less than 10, pushing and holding MULTI-CONTROL right recalls the last track of the folder. # If the current folder contains less than 10 tracks, pushing and holding MULTI-CONTROL left recalls the first track of the folder. Also, if the remaining number of tracks after searching every 10 tracks is less than 10, pushing and holding MULTI-CONTROL left recalls the first track of the folder.

Displaying text information on MP3/WMA/AAC/WAV disc

Text information recorded on an MP3/WMA/ AAC/WAV disc can be displayed.

When playing back an MP3/ WMA/AAC disc

% Press DISPLAY.

Press DISPLAY repeatedly to switch between the following settings:

: folder name— : file name— : folder

name and

: album title— : artist name and : track title— ple display

# If specific information has not been recorded on an MP3/WMA/AAC disc, title or name is not displayed.

: file name— : artist name and

: comment and : file name—Sim-

# Depending on the version of iTunes write MP3 files onto a disc, comment information may not be correctly displayed. # Depending on the version of Windows Media Player used to encode WMA files, album names and other text information may not be correctly displayed.

used to

When playing back a WAV disc

% Press DISPLAY.

Press DISPLAY repeatedly to switch between the following settings:

: folder name— : file name— : folder

name and

# If specific information has not been recorded on a WAV disc, name is not displayed. # You can only play back WAV files in the frequencies 16, 22.05, 24, 32, 44.1 and 48 kHz (LPCM), or 22.05 and 44.1 kHz (MS ADPCM). The sampling frequency shown in the display may be rounded.

: file name—Simple display

Scrolling text information in the display

This unit can display the first 24 letters only of folder name, file name, track title, artist name, album title and comment. When the recorded information is longer than 24 letters, you can scroll the text to the left so that the rest of the text information can be seen. ! When the jacket art is turned off, this unit

can display the first 30 letters of text information.

% Press DISPLAY and hold until the text information begins to scroll through the display.

The text information scrolls.

Page 32

Section

MP3/WMA/AAC/WAV Player

Notes

! Unlike MP3, WMA and AAC file format, WAV

files display only the folder name and the file name.

! When Ever Scroll is set to ON at the initial set-

ting, text information scrolls continuously in the display. Refer to Switching the Ever Scroll on page 92.

Selecting tracks from the file name list

File name list lets you see the list of file names (or folder names) and select one of them to playback.

1 Press LIST to select the file name list mode.

Press LIST repeatedly to switch between the following lists: Folder/file name list—jacket art list—playback display

2 Use MULTI-CONTROL to select the desired file name (or folder name).

Turn to change the name of file or folder; press to play; push right to see a list of the files (or folders) in the selected folder.

# You can also change the name of file or folder by pushing MULTI-CONTROL up or down. # To return to the previous list (the folder one level higher), push MULTI-CONTROL left. # If the folder/file number is more than 100, last 2-digit of the folder/file number is displayed. # Number of the folders/files in the currently selected folder will be indicated on the right side of the display. # If you do not operate the list within about 30 seconds, the file name list mode is canceled automatically.

Displaying jacket arts on CD-ROM discs

If jacket arts are recorded on CD-ROM disc, you can display them on this unit so you can easily find a specific folder looking at the jacket art. ! Record jacket arts for folders on CD-ROM

in advance using your computer. For details, please visit the following site: http://www.pioneer.co.jp/car/pclink4/indexe.html

! Jacket arts (max. 15 images) directly be-

neath the ROOT folder can be read. If images have been recorded on the lower tier than the ROOT folder, these images are not displayed. In this case, preset images are displayed. Refer to About folders and MP3/WMA/AAC/WAV files on page 102.

Reading jacket arts

With this function on, jacket arts on CD-ROM disc are automatically read in this unit when the disc is inserted.

! Up to 15 jacket arts can be read in this unit. ! Reading jacket arts can take approx. 40

seconds. If the disc is reloaded, this unit read jacket arts again from the beginning.

! Jacket arts are not displayed if MIXED-

MODE CD or partial CD is inserted into this unit.

! For other folders with no jacket arts re-

corded, this unit automatically assigns preset images to them.

1 Use MULTI-CONTROL to select Jacket art in the function menu. Jacket art appears in the display.

2 Press MULTI-CONTROL to turn jacket art read on.

# To turn jacket art function off, press

MULTI-CONTROL again.

Page 33

MP3/WMA/AAC/WAV Player

Selecting folders with jacket arts

You can display the list of folders that are already assigned jacket arts and select one to start playback. ! In the jacket art list, this unit displays up to

15 folders with jacket arts.

! For other folders with no jacket arts re-

corded, this unit automatically assigns preset images to them.

1 Press LIST to select the jacket art list mode.

Press LIST repeatedly to switch between the following lists: Folder/file name list—jacket art list—playback display

2 Push MULTI-CONTROL up or down to change the group of jacket art.

3 Use MULTI-CONTROL to select jacket art of the desired folder.

Turn to change the jacket art of folder; press to play.

# You can also change the jacket art of folder by pushing MULTI-CONTROL left or right. # If you do not operate the list within about 30 seconds, the jacket art list mode is canceled automatically.

Section

English

Page 34

51234

Section

Bluetooth Telephone

Hands-free phoning with cellular phones featuring Bluetooth wireless technology

If your cellular phone features Bluetooth wireless technology, you can connect to this unit for hands-free, wireless calls, even while driving.

Important

! Since this unit is on standby to connect with

your cellular phones via Bluetooth wireless technology, using this unit without running the engine can result in battery drainage.

! When phone is selected as a source, no audio

adjustments, except balance adjustment, are possible.

1 Battery strength indicator

Shows the battery strength of cellular phone. ! Battery strength indicator may differ

from the actual battery strength.

! If the battery strength is not available,

nothing is displayed in the battery strength indicator area.

2 Signal level indicator

Shows the signal strength of cellular phone. ! Signal level indicator may differ from the

actual signal level.

! Depending on the cellular phones featur-

ing Bluetooth wireless technology, radio field intensity is not available. In this

case, the signal level indicator does not appear.

3 Automatic answering/Automatic rejecting indicator

Shows AUTO when the automatic answering function is on (for more details, refer to Setting the automatic answering on page

50). Shows REF when the automatic rejecting function is on (for more details, refer to Set- ting the automatic rejecting on page 50).

4 Incoming call notice indication

Shows when an incoming call has been received and not checked yet.

5 Device name

Shows the device name of the cellular phone.

6 Calendar display

Shows the date, and time.

7 User number indicator

Shows the registration number of the cellular phone.

Notes

! This unit’s phone call reception is on standby

when ignition switch is set to ACC or ON.

! The line-of-sight distance between this unit

and your cellular phone must be 10 meters or less for sending and receiving voice and data via Bluetooth wireless technology. However, the transmission distance may become shorter than the estimated distance, depending on the environment in use.

! In order to use Bluetooth wireless technology,

devices must be able to interpret certain profiles. This unit is compatible with the following profiles.

— GAP (Generic Access Profile) — SDP (Service Discovery Protocol)

Page 35

Bluetooth Telephone

Section

English

— OPP (Object Push Profile) — HSP (Head Set Profile) — HFP (Hands Free Profile)

! When phone is selected as a source, volume

and equalizer curve are automatically changed to suitable settings for the phone source. When the source is returned to another source, volume and equalizer settings automatically return to the original setting.

About the telephone source

Standby mode

Once connected via Bluetooth wireless technology, this unit will remain on telephone source standby in the background all the while the connection is sustained. This means you can freely use the other functions of this unit, but still be ready to receive a call.

% Press SOURCE to select the telephone.

Press SOURCE until you see Telephone dis- played.

# You can also select the Telephone by press- ing PHONE.

nology, refer to Connecting a cellular phone on page 38.

# Your phone should now be temporarily connected; however, to make best use of the technology, we recommend you register the phone to this unit.

2 Registration

Refer to Registering connected cellular phone on page 40 for instructions on how to register your temporarily connected phone.

3 Volume adjustment

Adjust the earpiece volume on your cellular phone for comfort. When adjusted, the volume level is memorized in this unit as the default setting.

# Caller’s voice volume and ring volume may vary depending on the type of cellular phones. # If the difference between the ring volume and caller’s voice volume is big, overall volume level may become unstable. # Before disconnecting cellular phone from this unit, make sure to adjust the volume to proper level. If the volume has been muted (zero level) on your cellular phone, the volume level of your cellular phone remains muted even after the cellular phone is disconnected from this unit.

Setting up for hands-free phoning

Before you can use the hands-free phoning function you will need to set up the unit for use with your cellular phone. This entails establishing a Bluetooth wireless connection between this unit and your phone, registering your phone with this unit, and adjusting the volume level.

1 Connection

For detailed instructions on connecting your phone to this unit via Bluetooth wireless tech-

Page 36

Section

Bluetooth Telephone

Basic operation of handsfree phoning

These are the basic operations to use handsfree phoning via Bluetooth wireless technology. More advanced hands-free phoning operations are explained starting on Introduction of advanced hands-free phoning operation on page 38.

Making a phone call

Dial a number

The most basic way to make a call is to simply dial the number.

1 Press DIRECT on the remote control and dial a phone number by pressing 0–9.

2 Press JOYSTICK on the remote control to confirm the number.

3 Press OFF HOOK on the remote control to call the number.

# You can also dial a phone number in the function menu. Refer to Making a call by entering phone number on page 48 for detailed instructions.

Calling a number in the Phone Book or the Call History

Refer to Calling a number in the Phone Book on page 43 and Calling a number from the Call History on page 48 for detailed instructions.

Preset number

Numbers that you dial frequently can be assigned to presets for quick recall. Refer to Using preset numbers on page 46 for how to assign a number to a preset.

1 Push MULTI-CONTROL up or down to select a preset number.

Preset numbers Dial preset 1–10 appear in the display.

# You can also recall preset numbers Dial preset 1–10 by pressing 0–9 on the remote control. # If the number is already in the Phone Book then the name is also displayed. # No data is displayed for preset numbers that have not been assigned.

2 Press MULTI-CONTROL to make a call.

# You can also perform this operation by pressing OFF HOOK on the remote control.

Voice recognition

If your cellular phone features voice recognition technology, you can make a call by voice commands. ! Operation varies depending on the type of

your cellular phone. Refer to the instruction manual that came with your cellular phone for detailed instructions.

! This function can be operated only when

the connection is established with HFP (Hands Free Profile).

1 Press BAND and hold until Voice dial appears in the display. Voice dial appears in the display. When Voice dial ON is displayed, voice recognition

function is now ready.

# If your cellular phone does not feature voice recognition function, No voice dial appears in the display and opearation is not available.

2 Pronounce the name of your contact.

For more details concerning the voice recognition operation, refer to your cellular phone’s instruction manual.

Page 37

Bluetooth Telephone

Section

English

Taking a phone call

Answering an incoming call

Even when a source other than Telephone is selected or when this unit itself is turned off, you can still answer incoming calls. If you set this unit to automatically answering incoming calls, refer to Setting the automatic answering on page 50.

1 When a call comes in, press MULTI-CONTROL.

# You can also perform this operation by pressing OFF HOOK on the remote control. # If the private mode is selected on the cellular phone, hands-free phoning may not be performed.

2 To end the call, press PHONE.

The estimated call time appears in the display (this may differ slightly from the actual call time).

# You can also perform this operation by pressing ON HOOK on the remote control. # You may hear a noise when you disconnect the phone.

Rejecting an incoming call

You can reject an incoming call. If you want to set this unit to automatically rejecting all incoming calls, refer to Setting the automatic re- jecting on page 50.

% When a call comes in, press PHONE.

The call is rejected.

# You can also perform this operation by pressing ON HOOK on the remote control. # The rejected call is recorded in missed call history list. About the missed call history list, refer to Using the Call History on page 47.

Answering a call waiting

If while you are talking on the phone another call comes in, the number (or name if it is in your phone book) of the new caller appears in the display to signal that you have a call waiting. You can put the first caller on hold while you answer the call waiting, or you can choose to reject the call, in which case the number is logged as a missed call.

1 Press MULTI-CONTROL to answer a call waiting.

# You can also perform this operation by pressing OFF HOOK on the remote control. # Pressing MULTI-CONTROL switches between callers on hold.

2 Press PHONE to end all calls.

Pressing PHONE ends all calls including a call waiting on line.

# You can also perform this operation by pressing ON HOOK on the remote control. # Except for switching between the calls on line, you cannot end each call waiting individually. Pressing PHONE ends all calls.

Rejecting a call waiting

If you would rather not interrupt your current call to answer a call waiting, you can reject it and have the number added to the missed call history list. ! With some cellular phones, this feature

may not be possible.

% Press PHONE to reject a call waiting.

# You can also perform this operation by press-

ing ON HOOK on the remote control.

Page 38

Section

Bluetooth Telephone

Introduction of advanced hands-free phoning operation

1 Function display

Shows the function status.

1 Press MULTI-CONTROL to display the main menu. FUNCTION, AUDIO and ENTERTAINMENT

appear on the display.

2 Use MULTI-CONTROL to select FUNCTION.

Turn to change the menu option; press to select. Function names for hands-free phoning appear on the display.

3 Turn MULTI-CONTROL to change functions.

Turn MULTI-CONTROL clockwise or counterclockwise to switch between the functions.

Function names that appear in the display are different depending on your cellular phone’s connection and registration status.

If not connected yet

Search & connect (search and connect)— Connection open (connection open)— Connect phone (connect phone)— Delete phone (delete phone)— Phone book transfer (phone book transfer)— Refuse calls (automatic reject setting)— Auto answer (automatic answer setting)— Ring tone (ring tone select)—Auto connect

(automatic connection setting)—Echo cancel (echo cancel)—Device INFO. (device information)

If connected but not registered yet

Disconnect phone (disconnect phone)— Set phone (registering phone)— Delete phone (delete phone)— Phone book transfer (phone book transfer)— Number dial (call by entering number)— Refuse calls (automatic reject setting)— Auto answer (automatic answer setting)— Ring tone (ring tone select)—Auto connect

(automatic connection setting)—Echo cancel (echo cancel)—Device INFO. (device information)

If already connected and registered

Disconnect phone (disconnect phone)— Delete phone (delete phone)— Phone book transfer (phone book transfer)— Phone book name view (phone book name view)—Clear memory (clear memory)— Number dial (call by entering number)— Refuse calls (automatic reject setting)— Auto answer (automatic answer setting)— Ring tone (ring tone select)—Auto connect

(automatic connection setting)—Echo cancel (echo cancel)—Telephone icon (telephone icon)—Device INFO. (device information)

# Phone book name view and Telephone icon cannot be selected for cellular

phone registered guest phone. # If cellular phone is connected to this unit via Bluetooth wireless technology with HSP (Head Set Profile), Phone book name view, Clear memory, Number dial and Refuse calls cannot be selected. # To return to the playback display, press BAND.

Connecting a cellular phone

To use a phone wirelessly with this unit, it is necessary first to establish a connection using Bluetooth wireless technology. There are several ways you can do this.

Page 39

Bluetooth Telephone

Section

English

! Connection is normally established by HFP,

which gives you a full control of functions available on the telephone source. However, in some cases when you make connection from your cellular phone, the connection may be made by HSP and several functions may not be available.

! A phone may be connected via Bluetooth

wireless technology but not yet registered with this unit. In this case it is said to be temporarily connected, and the available features are limited. To take full advantage of all the features available, we recommend you register your phone with this unit. Refer to Registering connected cellular phone on the next page for more on this.

Searching for available cellular phones

You can have this unit search for any available phones in the area that have Bluetooth wireless technology, then select which you want to connect to from a list displayed on-screen.

1 Use MULTI-CONTROL to select Search & connect in the function menu. Search & connect appears in the display.

2 Press MULTI-CONTROL to search for available cellular phones.

While searching, Searching is displayed. When available cellular phones featuring Bluetooth wireless technology are found, device names or Name not found (if names cannot be obtained) are displayed.

# If this unit fails to find any available cellular phones, Not found is displayed.

3 Push MULTI-CONTROL up or down to select a device name you want to connect.

4 Press MULTI-CONTROL to connect the selected cellular phone.

While connecting, Connecting is displayed. To complete the connection, please check the device name (Pioneer BT unit) and enter the link code on your cellular phone. If the connection is established, Connected is displayed.

# The link code is set to 0000 as default. You can change this code in the initial setting. Refer to Entering PIN code for Bluetooth wireless con- nection on page 93.

Using a cellular phone to initiate a connection

Putting the unit in Connection open mode allows you to establish a Bluetooth wireless connection from your phone. You may need to refer to the operation manual that came with your phone if you are unsure how to initiate a connection from your phone.

1 Use MULTI-CONTROL to select Connection open in the function menu. Connection open appears in the display.

2 Press MULTI-CONTROL to open the connection. Always waiting is displayed and the unit is

now on standby for connection from cellular phone.

3 Use cellular phone to connect to this unit.

# Operation varies depending on the type of your cellular phone. Refer to the instruction manual that came with your cellular phone for detailed instructions. # You may need to enter the link code on your cellular phone to complete the connection.

Page 40

Section

Bluetooth Telephone

# The link code is set to 0000 as default. You can change this code in the initial setting. Refer to Entering PIN code for Bluetooth wireless con- nection on page 93.

Disconnecting a cellular phone

When you are done using your phone with this unit, you can close the Bluetooth wireless connection.

1 Use MULTI-CONTROL to select Disconnect phone in the function menu. Disconnect phone, and device name of the

connected phone appear in the display.

2 Press MULTI-CONTROL to disconnect a cellular phone from this unit.

After the disconnection is completed, Disconnected is displayed.

Registering connected cellular phone

You can register a phone that is temporarily connected to this unit in order to take full advantage of the features available with Bluetooth wireless technology. A total of five phones can be registered: three user cellular phones and two guest phones. When registered as a user phone, all the possible functions are available for use. When registered as a guest phone, some functions are limited.

1 Use MULTI-CONTROL to select Set phone in the function menu. Set phone appears in the display.

2 Push MULTI-CONTROL up or down to select a registration assignment.

Each time MULTI-CONTROL is pushed up or down, the registration assignment is switched in the following order: Phone1 (user phone 1)—Phone2 (user phone

2)—Phone3 (user phone 3)—Guest1 (guest phone 1)—Guest2 (guest phone 2)

# As you select each assignment, you can see whether or not a phone is already registered there. If the assignment is empty, No data is displayed. If the assignment is already taken, the device name appears. If you want to replace an assignment with a new phone, first delete the current assignment. For more detailed instructions, see Deleting a registered phone on this page. # If you need to know the BD (Bluetooth Device) address of the phone, push MULTI-CONTROL left here.

3 Press MULTI-CONTROL to register the cellular phone to this unit.

When the registration is completed, Reg. completed is displayed.

Deleting a registered phone

If you no longer need to use a registered phone with this unit, you can delete it from the registration assignment for another phone. ! If a registered phone is deleted from this

unit, the Phone Book and other settings of that phone are cleared simultaneously.

1 Use MULTI-CONTROL to select Delete phone in the function menu. Delete phone appears in the display.

Page 41

Bluetooth Telephone

Section

English

2 Push MULTI-CONTROL up or down to select a registration assignment.

Each time MULTI-CONTROL is pushed up or down, the registration assignment is switched in the following order: Phone1 (user phone 1)—Phone2 (user phone

2)—Phone3 (user phone 3)—Guest1 (guest phone 1)—Guest2 (guest phone 2)

# If the assignment is empty, No data is dis- played and the operation is not possible. # If you need to know the BD (Bluetooth Device) address of the phone, push MULTI-CONTROL left here.

3 Push MULTI-CONTROL right to select Delete YES. Delete YES is displayed. Deleting phone is

now on standby.

4 Press MULTI-CONTROL to delete the phone.

After the phone is deleted, Deleted is displayed.

Connecting to a registered cellular phone

Once your phone is registered with this unit it is a simple matter to establish a Bluetooth wireless connection, either manually by selecting a registration assignment, or automatically when a registered phone is within range.

Connecting to a registered phone manually

Select a phone from the registration assignments to connect to the phone manually.

1 Use MULTI-CONTROL to select Connect phone in the function menu. Connect phone appears in the display.

2 Push MULTI-CONTROL up or down to select a registration assignment.

Each time MULTI-CONTROL is pushed up or down, the registration assignment is switched in the following order: Phone1 (user phone 1)—Phone2 (user phone

2)—Phone3 (user phone 3)—Guest1 (guest phone 1)—Guest2 (guest phone 2)

# If the assignment is empty, No data is dis- played and the operation is not possible. # If you need to know the BD (Bluetooth Device) address of the phone, push MULTI-CONTROL left here.

3 Press MULTI-CONTROL to connect the selected cellular phone.

While connecting, Connecting is displayed. After the connection is completed, Connected is displayed.

Connecting to a registered phone automatically

When Automatic Connection is active the unit will automatically establish a connection with a registered phone when it comes into range. ! This feature may not work with all phones.

If your registered phone fails to connect with Automatic Connection, use the manual connection method explained in Con- necting to a registered phone manually on this page.

! This feature is not possible if you are play-

ing back songs on your Bluetooth audio player via Bluetooth wireless technology. In such case, stop the playback and switch to another source for your cellular phone to connect to this unit through this function.

! While you are operating in the function

menu of Telephone source or BT Audio source, this unit does not initiate an automatic connection to your registered phone.

! This feature cannot be set for each different

user phone.

Page 42

Section

Bluetooth Telephone

1 Use MULTI-CONTROL to select Auto connect in the function menu. Auto connect appears in the display.

2 Press MULTI-CONTROL to turn automatic connection on. ON appears in the display.

If your cellular phone is set ready for Bluetooth wireless connection, the connection to this unit will be automatically established.

# To turn automatic connection off, press MULTI-CONTROL again.

Note

Automatic connection is performed in the registration number order.

Using the Phone Book

The Phone Book can store up to 500 names and numbers. Use the Phone Book to browse for numbers on the unit’s display and select numbers to call. Names and phone numbers stored in a registered user phone’s address book can be transferred to the Phone Book, allowing you to fill the Phone Book quickly and easily with your contacts.

Transferring entries to the Phone Book

This function is available only for cellular phones registered to this unit as user. Phone books from guest phones cannot be transferred to this unit.

To populate the Phone Book you can transfer the numbers in a registered user phone’s address book. The Phone Book can hold a total of 500 entries; 300 from User 1, 150 from User 2, and 50 from User 3.

! With some cellular phones, it may not be

possible to transfer whole phone book at a time. In this case, transfer phone book entries one by one from your phone by using your cellular phone.

! Depending on the cellular phone con-

nected via Bluetooth wireless technology, this unit cannot display the Phone Book correctly. (Some characters may be garbled.)

! If the phone book in the cellular phone con-

tains image data, phone book may not be correctly transferred.

1 Use MULTI-CONTROL to select Phone book transfer in the function menu. Phone book transfer appears in the display.

2 Press MULTI-CONTROL to enter in the phone book transfer standby mode. Transfer appears in the display.

# With Telephone source selected, you can also display the phone book transfer standby mode by pressing and holding PHONE.

3 Use cellular phone to perform phone book transfer.

Perform phone book transfer using the cellular phone. For detailed instruction on this, refer to the instruction manual that came with your cellular phone.

# While transferring the phone book, hourglass icon is displayed. # The display indicates how many entries have been transferred and the total number to be transferred.

4 Data transferred is displayed and phone book transfer is completed.

Page 43

Bluetooth Telephone

Section

English

Changing the Phone Book display order

You can choose to display the Phone Book sorted alphabetically by first name or last name. ! With some cellular phones, this feature

may not be possible.

1 Use MULTI-CONTROL to select Phone book name view in the function menu. Phone book name view appears in the dis-

play.

2 Press MULTI-CONTROL to change the name view order. Inverted is displayed and the name view

order is changed. Pressing MULTI-CONTROL repeatedly changes the name view order between first name and last name.

Calling a number in the Phone Book

After finding the number in the Phone Book you want to call, you can select the entry and make the call.

1 Press LIST to display the Phone Book.

3 Press MULTI-CONTROL to display entries.

The display shows the first three Phone Book entries starting with that letter (e.g. “Ben”, “Brian” and “Burt” when “B” is selected).

# If you want to go back and select another alphabetical letter, push MULTI-CONTROL left.

4 Push MULTI-CONTROL up or down to select a Phone Book entry you want to call.

Pushing MULTI-CONTROL up or down changes Phone Book entries.

5 Push MULTI-CONTROL right to display the detailed list of the selected entry.

The phone number, name and genre (if assigned) of entries are displayed in the detailed list.

# You can scroll the name and phone number by holding DISPLAY. # If several phone numbers are entered to an entry, select one by turning MULTI-CONTROL. # If you want to go back and select another entry, push MULTI-CONTROL left.

6 Press MULTI-CONTROL to make a call.

7 To end the call, press PHONE.

The estimated call time appears in the display (this may differ slightly from the actual call time).

2 Push MULTI-CONTROL left or right to select the first letter of the name you are looking for.

Each time MULTI-CONTROL is pushed left or right alphabetical letters are changed.

# Turning MULTI-CONTROL clockwise or coun- terclockwise can also perform the same operation.

Assign genres to phone numbers

If there are a lot of entries in the Phone Book it can be useful to assign them to specific genres (categories) for easier searching. There are four preset genres that you can assign entries to: Home, Mobile, Office and Others.

1 Press LIST to display the Phone Book.

Page 44

Section

Bluetooth Telephone

2 Use MULTI-CONTROL to display the detailed list of your desired Phone Book entry.

See step 2 to 5 on Calling a number in the Phone Book on the previous page for how to

do this.

3 Press and hold MULTI-CONTROL to display the genre input screen. Edit genre is displayed.

4 Push MULTI-CONTROL up or down to select a genre.

Each time MULTI-CONTROL is pushed up or down, the genres are switched in the following order: Home (home)—Mobile (mobile)—Office (office)—Others (others)

5 Press MULTI-CONTROL to assign the genre to the phone number.

The selected genre is assigned to the phone number, and the display reverts to the detailed list.

Editing the name of a Phone Book entry

You can edit the names of Phone Book entries. Each name can be up to 40 characters long.

1 Press LIST to display the Phone Book.

2 Use MULTI-CONTROL to display the detailed list of your desired Phone Book entry.

See step 2 to 5 on Calling a number in the Phone Book on the previous page for how to

do this.

3 Press and hold MULTI-CONTROL to display the genre input screen. Edit genre is displayed.

4 Turn MULTI-CONTROL clockwise or counterclockwise to switch to the name input screen.

Turning MULTI-CONTROL switches input screens in the following order: Edit genre (genre input screen)—Edit name (name input screen)—Edit number (number input screen)—Edit icon (icon selection screen)—Clear memory (clear memory screen)

5 Press DISPLAY to select the desired character type.

Each press of DISPLAY switches the character types in the following order: Alphabet (upper case), numbers and symbols —alphabet (lower case)—numbers and symbols—European characters, such as those with accents (e.g., á, à, ä, ç) or Russian characters

# Pressing and holding DISPLAY enables you to switch character set between ISO8859-1 (European characters) and ISO8859-5 (Russian characters) alternately. # European characters and Russian characters can’t be mixed.

6 Push MULTI-CONTROL up or down to select a letter.

# To delete a character and leave a space, select

“_” (underbar).

7 Push MULTI-CONTROL right to move the cursor to the next character position.

When the letter you want is displayed, push MULTI-CONTROL right to move the cursor to the next position and then select the next letter. Push MULTI-CONTROL left to move backwards in the display.

8 Press MULTI-CONTROL to store the new name.

After the name is stored, the display reverts to the Phone Book entry list.

Page 45

Bluetooth Telephone

Section

English

Editing phone numbers

You can edit the phone numbers of Phone Book entries.

1 Press LIST to display the Phone Book.

2 Use MULTI-CONTROL to display the detailed list of your desired Phone Book entry.

See step 2 to 5 on Calling a number in the Phone Book on page 43 for how to do this.

3 Press and hold MULTI-CONTROL to display the genre input screen. Edit genre is displayed.

4 Turn MULTI-CONTROL clockwise or counterclockwise to switch to the number input screen.

5 Push MULTI-CONTROL left or right to move the cursor to the number you want to change.

6 Push MULTI-CONTROL up or down to change numbers.

Repeat these steps until you have finished changing.

7 Press MULTI-CONTROL to store the new number.

After the number is stored, the display reverts to the detailed list.

Selecting the icon of a Phone Book entry

You can select the icon of Phone Book entries. When you make a call or answer an incoming call, that icon is displayed.

1 Press LIST to display the Phone Book.

2 Use MULTI-CONTROL to display the detailed list of your desired Phone Book entry.

See step 2 to 5 on Calling a number in the Phone Book on page 43 for how to do this.

3 Press and hold MULTI-CONTROL to display the genre input screen. Edit genre is displayed.

4 Turn MULTI-CONTROL clockwise or counterclockwise to switch to the icon selection screen.

5 Push MULTI-CONTROL left or right to select an icon.

Each time MULTI-CONTROL is pushed left or right, the icons are switched in the following order: icon 1 (icon 1)—icon 2 (icon 2)—icon 3 (icon

3)—icon 4 (icon 4)—icon 5 (icon 5)

6 Press MULTI-CONTROL to assign the icon to the Phone Book entry.

The selected icon is assigned to the Phone Book entry, and the display reverts to the detailed list.

Page 46

Section

Bluetooth Telephone

Note

You can rewrite icons of Phone Book entries. (Refer to Rewriting the entertainment displays and the icons for telephone functions on page 98.)

Clearing a Phone Book entry

You can delete Phone Book entries in the Phone Book one by one. To clear all of your entries in the Phone Book, refer to Clearing memory on this page.

1 Press LIST to display the Phone Book.

2 Use MULTI-CONTROL to display the detailed list of your desired Phone Book entry.

See step 2 to 5 on Calling a number in the Phone Book on page 43 for how to do this.

3 Press and hold MULTI-CONTROL to display the genre input screen. Edit genre is displayed.

4 Turn MULTI-CONTROL clockwise or counterclockwise to switch to the clear memory screen.

6 Press MULTI-CONTROL to delete the Phone Book entry. Cleared is displayed.

The Phone Book entry is deleted. The display returns to Phone Book entry list.

Using preset numbers

Assigning preset numbers

You can assign up to ten frequently called phone numbers to number presets (Dial preset 1–10). ! To call the number you assigned to preset,

refer to Preset number on page 36.

1 Press LIST to display the Phone Book.

2 Use MULTI-CONTROL to display the detailed list of your desired Phone Book entry.

See step 2 to 5 on Calling a number in the Phone Book on page 43 for how to do this.

3 Press and hold one of 0–9 on the remote control to store the selected phone number in that preset. Press 1 to store in Dial preset 1; 4 to store in Dial preset 4, etc. Press 0 to store in preset Dial preset 10. Hold the button down until

you hear a beep.

# Up to 50 phone numbers (10 phone numbers for each of the three registered phones and two guest phones) can be stored in memory.

5 Push MULTI-CONTROL right to show a confirmation display. Clear memory YES is displayed.

# If you do not want to clear memory that you have selected, push MULTI-CONTROL left. The display reverts.

Clearing memory

You can clear memory of each item; Phone Book, dialed/received/missed call history list and preset phone number.

Page 47

Bluetooth Telephone

Section

English

1 Use MULTI-CONTROL to select Clear memory in the function menu. Clear memory appears in the display.

2 Push MULTI-CONTROL up or down to select an item.

Each time MULTI-CONTROL is pushed up or down, the items are switched in the following order: Phone book (phone book)—Missed calls (missed call history)—Dialled calls (dialled call history)—Received calls (received call history)—Preset memory (preset phone numbers)—All clear (delete all memory)

# If you select All clear, all memory regardless of items will be cleared. # If guest phone is connected to this unit via Bluetooth wireless technology, Phone book cannot be selected.

3 Push MULTI-CONTROL right to determine the item that you want to delete from this unit. Clear memory YES is displayed. Clearing

memory is now on standby.

# If you do not want to clear memory that you have selected, push MULTI-CONTROL left. The display reverts.

4 Press MULTI-CONTROL to clear the memory. Cleared is displayed and data on the selected

item is cleared from this unit’s memory.

Using the Call History

The ten most recent calls made (dialed), received and missed, together with their times and dates, are stored in the Call History. You can browse the Call History and call numbers from it.

Displaying the Call History

The Call History is divided into three groups: Missed calls, Dialed calls, and Received calls. You can see the time and date of the call, as well as the number (and name if the number is in the Phone Book).

1 Press LIST to display the list.

Press LIST repeatedly to switch between the following lists: PHONE BOOK (phone book)—MISSED (missed call)—DIALLED (dialled call)— RECEIVED (received call)

# About the Phone Book list, refer to Using the Phone Book on page 42.

# If no phone numbers have been stored in the selected list, No Data is displayed.

2 Turn MULTI-CONTROL to select a phone number.

Turning MULTI-CONTROL clockwise or counterclockwise to change the phone numbers stored in the list.

# If the number is already in the Phone Book the name is displayed. # You can also change the phone number by pushing MULTI-CONTROL up or down.

3 Push MULTI-CONTROL right to display the detailed list.

Calling time and date, and phone number are displayed in the detailed list.

# If the number is already in the Phone Book then the name is also displayed. # Turning MULTI-CONTROL clockwise or coun- terclockwise switches to the previous or next phone number diplayed in the detailed list. # If you do not operate anything within about 30 seconds, the list display is canceled automatically.

Page 48

Section

Bluetooth Telephone

Calling a number from the Call History

1 Display the list and select a phone number.

Display the phone number you want to make a call.

2 Push MULTI-CONTROL right to display the detailed list.

Calling time and date, and phone number are displayed in the detailed list.

# If the number is already in the Phone Book then the name is also displayed.

3 Press MULTI-CONTROL to make a call.

4 To end the call, press PHONE.

The estimated call time appears in the display (this may differ slightly from the actual call time).

Calling an international number from the Call History

When calling an international number stored in the Call History, proceed the country code with a +.

Assigning preset numbers

You can assign up to ten frequently called phone numbers to number presets (Dial preset 1–10).

1 Display the list and select a phone number.

Display the phone number you want to store in memory.

2 Push MULTI-CONTROL right to display the detailed list.

Calling time and date, and phone number are displayed in the detailed list.

3 Press and hold one of 0–9 on the remote control to store the selected phone number in that preset.

The selected phone number has been stored in memory. The next time you press the same preset button, the phone number is recalled from memory.

# Up to 50 phone numbers (10 phone numbers for each of the three registered phones and two guest phones) can be stored in memory.

1 With the detailed list displayed, press MULTI-CONTROL and hold to add +. Pressing and holding MULTI-CONTROL adds + to the phone number.

# + can only be added when the detailed list of Missed call, Dialled call or Received call is selected. # Pressing and holding MULTI-CONTROL again deletes +.

2 Press MULTI-CONTROL to make a call.

3 To end the call, press PHONE.

Making a call by entering phone number

You can make a call by directly entering phone numbers on this unit.

1 Use MULTI-CONTROL to select Number dial in the function menu. Number dial appears in the display.

# You can also enter in this menu from the standby display by pressing DIRECT on the remote control.

Page 49

Bluetooth Telephone

Section

English

2 Push MULTI-CONTROL up or down to select a number.

Pushing MULTI-CONTROL up repeatedly changes numbers in 012...9+#*_order. Pushing it down changes in _*#+9...210 order.

# You can also input numbers by pressing 0–9 on the remote control.

3 Push MULTI-CONTROL right to move the cursor to the next position.

When the number you want is displayed, push MULTI-CONTROL right to move the cursor to the next position and then select the next number. Push MULTI-CONTROL left to move backwards in the display.

# Up to 24 digits can be entered.

4 If you have completed entering the number, press MULTI-CONTROL.

Call confirmation appears.

5 Press MULTI-CONTROL again to make a call. While dialing, Dialing appears in the display.

6 To end the call, press PHONE.

The estimated call time appears in the display (this may differ slightly from the actual call time).

Echo canceling and noise reduction

When you are operating hands-free phoning in the vehicle, you may hear undesired echo. This function reduces the echo and noise and keeps a certain sound quality. ! This feature cannot be set for each different

user phone.

1 Use MULTI-CONTROL to select Echo cancel in the function menu. Echo cancel appears in the display.

2 Press MULTI-CONTROL to turn echo canceling on. ON appears in the display.

# To turn echo canceling off, press

MULTI-CONTROL again.

Changing the ring tone

The unit offers you to turn the ring tone for incoming calls on or off. ! The ring tone you select for this unit has no

effect on the ring tone used by your phone. If you do not want your phone and this unit to ring at the same time, we recommend you turn the ring tone of one or the other off.

1 Use MULTI-CONTROL to select Ring tone in the function menu. Ring tone appears in the display.

2 Push MULTI-CONTROL left or right to select a ring tone.

Each time MULTI-CONTROL is pushed left or right, the ring tone is selected in the following order:

OFF (ring tone off)—Ring tone1 (ring tone 1) —Ring tone2 (ring tone 2)—Ring tone3 (ring

tone 3)

Note

Ring tone3 differs depending on the situation of the source (on or off).

Page 50

Section

Bluetooth Telephone

Setting the automatic rejecting

If this function is on, this unit automatically rejects all incoming calls. ! This feature cannot be set for each different

user phone.

1 Use MULTI-CONTROL to select Refuse calls in the function menu. Refuse calls appears in the display.

2 Press MULTI-CONTROL to turn automatic call rejection on. ON appears in the display.

# To turn automatic call rejection off, press

MULTI-CONTROL again.

Setting the automatic answering

If this function is on, this unit automatically answers all incoming calls. ! This feature cannot be set for each different

user phone.

1 Use MULTI-CONTROL to select Auto answer in the function menu. Auto answer appears in the display.

Selecting the icon for user phone

You can select one of icons to be displayed for telephone source. A different icon can be assigned for each different user phone.

1 Use MULTI-CONTROL to select Telephone icon in the function menu. Telephone icon appears in the display.

2 Push MULTI-CONTROL left or right to select an icon.

Each time MULTI-CONTROL is pushed left or right, the icons are switched in the following order: icon 1 (icon 1)—icon 2 (icon 2)—icon 3 (icon

3)—icon 4 (icon 4)—icon 5 (icon 5)

3 Press MULTI-CONTROL to assign the icon to the user phone.

The selected icon is assigned to the user phone.

Note

You can rewrite icons for user phones. (Refer to

Rewriting the entertainment displays and the icons for telephone functions on page 98.)

2 Press MULTI-CONTROL to turn automatic answering on. ON appears in the display.

# To turn automatic answering function off, press MULTI-CONTROL again.

Note

If both the automatic reject and automatic answer functions are set to ON, the automatic reject is prioritized and all incoming calls are automatically rejected.

Displaying BD (Bluetooth Device) address

Each device featuring Bluetooth wireless technology is allocated a unique 48-bit device address. Each device address consists of a 12digit of hexadecimal string. You can display the BD address of your cellular phone and this unit.

Page 51

Bluetooth Telephone

Section

English

Displaying BD address of your cellular phone

1 Use MULTI-CONTROL to select Delete phone in the function menu. Delete phone appears in the display.

2 Push MULTI-CONTROL up or down to select a registration assignment.

Each time MULTI-CONTROL is pushed up or down, the registration assignment is switched in the following order: Phone1 (user phone 1)—Phone2 (user phone

2)—Phone3 (user phone 3)—Guest1 (guest phone 1)—Guest2 (guest phone 2)

# If the assignment is empty, No data is dis- played and the operation is not possible.

3 Push MULTI-CONTROL left to switch to the BD address.

12-digit hexadecimal string is displayed.

# Pushing MULTI-CONTROL right returns to the device name.

4 Press BAND to return to the standby display.

pears. About the system version, refer to Displaying system version for repair on this page.

Displaying system version for repair

Should this unit fails to operate properly and you consult with dealer for repair, you may be asked to indicate the system versions of this unit and of Bluetooth module. You can display the versions and confirm them.

1 Use MULTI-CONTROL to select Device INFO. in the function menu.

The device name (Pioneer BT unit) of this unit appears in the display.

2 Push MULTI-CONTROL down to switch to the system version of this unit.

The system (microprocessor) version of this unit is displayed.

# Pushing MULTI-CONTROL left displays the version of the Bluetooth module of this unit. Pushing MULTI-CONTROL right returns to the system version of this unit.

Displaying BD address of this unit

1 Use MULTI-CONTROL to select Device INFO. in the function menu.

The device name (Pioneer BT unit) of this unit appears in the display.

2 Push MULTI-CONTROL left to switch to the BD address.

12-digit hexadecimal string is displayed.

# Pushing MULTI-CONTROL right returns to the device name.

Note

When you push MULTI-CONTROL down while the BD address (or the device name) of this unit is displayed, the system version of this unit ap-

Page 52

Section

Bluetooth Audio

Listening to songs on BT Audio (Bluetooth audio player)

You can use this unit to control a separately sold portable audio player featuring Bluetooth wireless technology (Bluetooth audio player).

Even though your audio player does not contain a Bluetooth module, you can still control it from this unit via Bluetooth wireless technology using a Bluetooth adapter (sold separately).

Important

! This unit can control a Bluetooth audio player

via A2DP or AVRCP profile. Bluetooth audio players (or Bluetooth adapters) compatible with those profiles can be connected to this unit. — A2DP profile (Advanced Audio Distribution

Profile): Only playing back songs on your audio player is possible.

— AVRCP profile (Audio/Video Remote Con-

trol Profile): Playing back, pausing, selecting songs, etc., are possible.

! Since there are a number of Bluetooth audio

players available on the market, operations with your Bluetooth audio player using this unit vary in great range. Please refer to the instruction manual that came with your Bluetooth audio player as well as this manual while operating your player on this unit.

! Information about songs (e.g. the elapsed

playing time, song title, song index, etc.) cannot be displayed on this unit.

! While you are listening to songs on your Blue-

tooth audio player, please refrain from operat-

ing on your cellular phone as much as possible. If you try operating on your cellular phone, the signal from your cellular phone may cause a noise on the song playback.

! When you are talking on the cellular phone

connected to this unit via Bluetooth wireless technology, the song playback from your Bluetooth audio player connected to this unit is muted.

! Even if while you are listening to song on your

Bluetooth audio player you switch to another source, the playback of song continues to elapse.

1 Connection indicator

Shows the Bluetooth wireless connection status.

2 Device name

Shows the device name of the connected Bluetooth audio player (or Bluetooth adapter).

% Press SOURCE to select Bluetooth audio player.

Press SOURCE until you see BT Audio displayed.

# If you cannot display BT Audio, first activate the BT audio source in the initial setting. For detailes, refer to Activating the BT Audio source on page 93.

Setting up for Bluetooth audio player

Before you can use Bluetooth audio player you will need to set up the unit for use.

1 Activation

Refer to Activating the BT Audio source on page 93 for instructions on how to turn the BT Audio on.

Page 53

Bluetooth Audio

Section

English

2 Connection

Refer to Connecting a Bluetooth audio player on this page on how to connect your Bluetooth audio player to this unit.

# Once connected via Bluetooth wireless technology, “Play”, “Stop” and “Pause” on Bluetooth audio player can be operated in the BT Audio source. # Before you can use audio players you may need to enter the PIN code into this unit. If your player requires a PIN code to establish a connection, look for the code on the player or in its accompanying documentation. Enter the PIN code referring to Entering PIN code for Bluetooth wire- less connection on page 93.

Connecting a Bluetooth audio player

For this unit to control your Bluetooth audio player it needs to establish a Bluetooth wireless connection. This function initiates the connection via Bluetooth wireless technology.

1 Press MULTI-CONTROL to display the main menu. FUNCTION, AUDIO and ENTERTAINMENT

appear on the display.

4 Press MULTI-CONTROL to open the connection. Always waiting is displayed. This unit is now

on standby for connection from Bluetooth audio player.

5 Use your Bluetooth audio player to connect to this unit.

When the connection is successfully established, Connected is displayed.

# Operation varies depending on the type of your Bluetooth audio player. Refer to the instruction manual that came with your Bluetooth audio player for detailed instructions.

2 Use MULTI-CONTROL to select FUNCTION.

Turn to change the menu option; press to select. The function name appears on the display.

3 Turn MULTI-CONTROL to select Connection open.

Page 54

Section

Bluetooth Audio

Function operation

1 Function display

Shows the function status.

Once connected via Bluetooth wireless technology, “Play”, “Stop” and other functions on Bluetooth audio player can be controlled from this unit’s function menu.

1 Press MULTI-CONTROL to display the main menu. FUNCTION, AUDIO and ENTERTAINMENT

appear on the display.

2 Use MULTI-CONTROL to select FUNCTION.

Turn to change the menu option; press to select. The function name appears in the display.

3 Turn MULTI-CONTROL to select the function.

Turn MULTI-CONTROL clockwise or counterclockwise to switch between the functions in the following order: Disconnect audio (disconnect audio)—Play (Play)—Stop (Stop)—Pause (pause)— Device INFO. (device information)

# If a Bluetooth audio player is connected via A2DP profile, only Disconnect audio and Device INFO. appear in the function menu. # If a Bluetooth audio player has not been connected to this unit yet, Connection open and Device INFO. appear in the function menu and other functions are not available. # To return to the playback display, press BAND.

Notes

! If you do not operate the function within about

30 seconds, the display is automatically returned to the playback display.

! Depending on Bluetooth audio players con-

nected to this unit, function operations may not be correctly operated.

Playing songs on Bluetooth audio player

1 Use MULTI-CONTROL to select Play in the function menu. Play appears in the display.

2 Press MULTI-CONTROL to start playback.

Pausing a song

Pause lets you temporarily stop playback of a song.

1 Use MULTI-CONTROL to select Pause in the function menu. Pause appears in the display.

2 Press MULTI-CONTROL to turn pause on.

Playback of the current song pauses.

# To turn pause off, press MULTI-CONTROL again.

Stopping playback

1 Use MULTI-CONTROL to select Stop in the function menu. Stop appears in the display.

Page 55

Bluetooth Audio

Section

English

2 Press MULTI-CONTROL to stop the playback.

Playback of the current song stops.

Disconnecting a Bluetooth audio player

When you are done using your Bluetooth audio player with this unit, you can close the Bluetooth wireless connection.

1 Use MULTI-CONTROL to select Disconnect audio in the function menu. Disconnect audio appears in the display.

2 Press MULTI-CONTROL to disconnect the Bluetooth audio player. Disconnected is displayed. The Bluetooth

audio player is now diconnected from this unit.

Displaying BD address of this unit

Note

When you push MULTI-CONTROL down while the BD address (or the device name) of this unit is displayed, the system version of this unit appears. About the system version, refer to Display- ing system version for repair on page 51.

Displaying system version for repair

1 Use MULTI-CONTROL to select Device INFO. in the function menu.

The device name (Pioneer BT unit) of this unit appears in the display.

2 Push MULTI-CONTROL down to switch to the system version of this unit.

The system (microprocessor) version of this unit is displayed.

# Pushing MULTI-CONTROL left displays the version of the Bluetooth module of this unit. Pushing MULTI-CONTROL right returns to the system version of this unit.

1 Use MULTI-CONTROL to select Device INFO. in the function menu.

The device name (Pioneer BT unit) of this unit appears in the display.

2 Push MULTI-CONTROL left to switch to the BD address.

12-digit hexadecimal string is displayed.

# Pushing MULTI-CONTROL right returns to the device name.

Page 56

243

Section

Multi-CD Player

Playing a CD

You can use this unit to control a multi-CD player, which is sold separately.

These are the basic steps necessary to play a CD with your multi-CD player. More advanced CD operation is explained starting on the next page.

1 Disc number indicator

Shows the disc number currently playing.

2 Track number indicator

Shows the track number currently playing.

3 Play time indicator

Shows the elapsed playing time of the current track.

4 Disc title indicator

Shows the title of the currently playing disc. ! If no title has been entered for the cur-

rently playing disc, nothing is displayed.

until the disc number appears in the display.

3 To perform fast forward or reverse, push and hold MULTI-CONTROL left or right.

4 To skip back or forward to another track, push MULTI-CONTROL left or right.

Pushing MULTI-CONTROL right skips to the start of the next track. Pushing MULTI-CONTROL left once skips to the start of the current track. Pushing again will skip to the previous track.

Notes

! When the multi-CD player performs the pre-

paratory operations, Ready is displayed.

! If an error message such as ERROR-11 is dis-

played, refer to the multi-CD player owner’s manual.

! If there are no discs in the multi-CD player ma-

gazine, No Disc is displayed.

! When you select a CD TEXT disc on a CD TEXT

compatible multi-CD player, the disc title automatically begins to scroll in the display. Ever Scroll function is ON at the initial setting, the disc title scrolls continuously. About Ever Scroll, refer to Switching the Ever Scroll on page 92.

1 Press SOURCE to select the multi-CD player.

Press SOURCE until you see Multi-CD displayed.

2 Push MULTI-CONTROL up or down to select a disc you want to listen to.

# You can also select a disc by using 1–6 but- tons on the remote control.

! For discs 1 to 6, press the corresponding

button number.

! For discs 7 to 12, press and hold the corre-

sponding numbers, such as 1 for disc 7,

Selecting a track directly

When using the remote control, you can select a track directly by entering the desired track number.

1 Press DIRECT.

Track number input display appears.

2 Press 0–9 buttons to enter the desired track number.

# You can cancel the input number by pressing

CLEAR.

Page 57

Multi-CD Player

Section

English

3 Press DIRECT.

The track of entered number will play.

Note

After entering the number input mode, if you do not perform an operation within about eight seconds, the mode is automatically canceled.

50-disc multi-CD player

Only those functions described in this manual are supported by 50-disc multi-CD players. This unit is not designed to operate disc title list functions with a 50-disc multi-CD player. About the disc title list functions, please refer to Selecting discs fr om the disc title list on page 61.

Introduction of advanced multi-CD player operation

1 Function display

Shows the function status.

1 Press MULTI-CONTROL to display the main menu. FUNCTION, AUDIO and ENTERTAINMENT

appear on the display.

2 Use MULTI-CONTROL to select FUNCTION.

Turn to change the menu option; press to select. The function name appears on the display.

3 Turn MULTI-CONTROL to select the function.

Turn MULTI-CONTROL clockwise or counterclockwise to switch between the functions in the following order: Play mode (repeat play)—Random mode (random play)—Scan mode (scan play)—

Pause (pause)—ITS play mode (ITS play)— ITS memory (ITS programming)—Title Input

(disc title input)

# To return to the playback display, press BAND.

Notes

! When playing a CD TEXT disc on a CD TEXT

compatible multi-CD player, you cannot switch to disc title input. The disc title will have already been recorded on a CD TEXT disc.

Page 58

Section

Multi-CD Player

! If you do not operate the function within about

30 seconds, the display is automatically returned to the playback display.

Repeating play

There are three repeat play ranges for the multi-CD player: Multi-CD repeat (multi-CD player repeat), Track repeat (one-track repeat) and Disc repeat (disc repeat).

1 Use MULTI-CONTROL to select Play mode in the function menu. Play mode appears in the display.

2 Press MULTI-CONTROL to select the repeat range.

Press MULTI-CONTROL repeatedly until the desired repeat range appears in the display.

! Multi-CD repeat – Repeat all discs in the

multi-CD player

! Track repeat – Repeat just the current

track

! Disc repeat – Repeat the current disc

Notes

! If you select other discs during repeat play,

the repeat play range changes to Multi-CD repeat.

! If you perform track search or fast forward/re-

verse during Track repeat, the repeat play range changes to Disc repeat.

2 Use MULTI-CONTROL to select Random mode in the function menu. Random mode appears in the display.

3 Press MULTI-CONTROL to turn random play on.

Tracks will play in a random order within the previously selected Multi-CD repeat or Disc repeat ranges.

# To turn random play off, press MULTI-CONTROL again.

Scanning CDs and tracks

While you are using Disc repeat, the beginning of each track on the selected disc plays for about 10 seconds. When you are using Multi-CD repeat, the beginning of the first track of each disc is played for about 10 seconds.

1 Select the repeat range.

Refer to Repeating play on this page.

2 Use MULTI-CONTROL to select Scan mode in the function menu. Scan mode appears in the display.

3 Press MULTI-CONTROL to turn scan play on.

The first 10 seconds of each track of the current disc (or the first track of each disc) is played.

Playing tracks in random order

Random play lets you play back tracks in random order within the repeat range,

Multi-CD repeat and Disc repeat.

1 Select the repeat range.

Refer to Repeating play on this page.

4 When you find the desired track (or disc) press MULTI-CONTROL to turn scan play off.

The track (or disc) will continue to play.

# If the display has automatically returned to the playback display, select Scan mode again by using MULTI-CONTROL.

Page 59

Multi-CD Player

Section

English

Note

After track or disc scanning is finished, normal playback of the tracks will begin again.

Pausing CD playback

Pause lets you temporarily stop playback of the CD.

1 Use MULTI-CONTROL to select Pause in the function menu. Pause appears in the display.

2 Press MULTI-CONTROL to turn pause on.

Playback of the current track pauses.

# To turn pause off, press MULTI-CONTROL again.

Using ITS playlists

ITS (instant track selection) lets you make a playlist of favorite tracks from those in the multi-CD player magazine. After you have added your favorite tracks to the playlist you can turn on ITS play and play just those selections.

2 Use MULTI-CONTROL to select ITS memory in the function menu. ITS memory appears in the display.

3 Select the desired track by pushing MULTI-CONTROL left or right.

4 Push MULTI-CONTROL up to store the currently playing track in the playlist. Memory complete is displayed and the cur-

rently playing selection is added to your playlist.

5 Press BAND to return to the playback display.

Note

After data for 100 discs has been stored in memory, data for a new disc will overwrite the oldest one.

Playback from your ITS playlist

ITS play lets you listen to the tracks that you have entered into your ITS playlist. When you turn on ITS play, tracks from your ITS playlist in the multi-CD player will begin to play.

1 Select the repeat range.

Refer to Repeating play on the previous page.

Creating a playlist with ITS programming

You can use ITS to enter and play back up to 99 tracks per disc from up to 100 discs (with the disc titles). (With multi-CD players sold before the CDX-P1250 and CDX-P650, up to 24 tracks can be stored in the playlist.)

1 Play a CD that you want to program.

Push MULTI-CONTROL up or down to select the CD.

2 Use MULTI-CONTROL to select ITS play mode in the function menu. ITS play mode appears in the display.

3 Press MULTI-CONTROL to turn ITS play on.

Playback begins of those tracks from your playlist within the previously selected Multi-CD repeat or Disc repeat ranges.

# If no tracks in the current range are programmed for ITS play, then ITS empty is displayed. # To turn ITS play off, press MULTI-CONTROL again.

Page 60

Section

Multi-CD Player

Erasing a track from your ITS playlist

You can delete a track from your ITS playlist if ITS play is on. If ITS play is already on, skip to step 2. If ITS play is not already on, use MULTI-CONTROL.

1 Play the CD with the track you want to delete from your ITS playlist, and turn ITS play on.

Refer to Playback from your ITS playlist on the previous page.

2 Use MULTI-CONTROL to select ITS memory in the function menu. ITS memory appears in the display.

3 Select the desired track by pushing MULTI-CONTROL left or right.

4 Push MULTI-CONTROL down to erase the track from your ITS playlist.

The currently playing selection is erased from your ITS playlist and playback of the next track from your ITS playlist begins.

# If there are no tracks from your playlist in the current range, ITS empty is displayed and normal play resumes.

5 Press BAND to return to the playback display.

3 Push MULTI-CONTROL down to erase all tracks on the currently playing CD from your ITS playlist.

All tracks on the currently playing CD are erased from your playlist and

Memory deleted is displayed.

4 Press BAND to return to the playback display.

Using disc title functions

You can input CD titles and display the titles. Then you can easily search for and play a desired disc.

Entering disc titles

Use the disc title input feature to store up to 100 CD titles (with ITS playlist) into the multiCD player. Each title can be up to 10 characters long.

1 Play the CD that you want to enter a title for.

Push MULTI-CONTROL up or down to select the CD.

2 Use MULTI-CONTROL to select Title Input in the function menu. Title Input appears in the display.

Erasing a CD from your ITS playlist

You can delete all tracks of a CD from your ITS playlist if ITS play is off.

1 Play the CD that you want to delete.

Push MULTI-CONTROL up or down to select the CD.

2 Use MULTI-CONTROL to select ITS memory in the function menu. ITS memory appears in the display.

3 Press DISPLAY to select the desired character type.

Page 61

Multi-CD Player

Section

English

4 Push MULTI-CONTROL up or down to select a letter of the alphabet.

Each time MULTI-CONTROL is pushed up, alphabet, numbers or symbols are displayed in ascending order (A B C ...). Each time MULTI-CONTROL is pushed down, letters are displayed in descending order.

5 Push MULTI-CONTROL right to move the cursor to the next character position.

When the letter you want is displayed, push MULTI-CONTROL right to move the cursor to the next position and then select the next letter. Push MULTI-CONTROL left to move backwards in the display.

6 Move the cursor to the last position by pushing MULTI-CONTROL right after entering the title.

When you push MULTI-CONTROL right one more time, the entered title is stored in memory.

7 Press BAND to return to the playback display.

Notes

! Titles remain in memory, even after the disc

has been removed from the magazine, and are recalled when the disc is reinserted.

! After data for 100 discs has been stored in

memory, data for a new disc will overwrite the oldest one.

Displaying disc titles

You can display the text information of any disc that has had a disc title entered.

% Press DISPLAY.

Press DISPLAY repeatedly to switch between the following settings:

: disc title—Simple display

Selecting discs from the disc title list

Disc title list lets you see the list of disc titles that have been entered into the multi-CD player and select one of them to play back.

1 Press LIST to switch to the disc title list mode during the playback display.

2 Use MULTI-CONTROL to select the desired disc title.

Turn to change the disc title; press to play.

# You can also change the disc title by pushing MULTI-CONTROL up or down. # If no title has been entered for a disc, No D.Title will be displayed. # No Disc is displayed next to the disc number when there is no disc in the magazine. # If you do not operate the list within about 30 seconds, the disc title list mode is canceled automatically.

Using CD TEXT functions

You can use these functions only with a CD TEXT compatible multi-CD player.

Page 62

Section

Multi-CD Player

Displaying text information on CD TEXT discs

% Press DISPLAY.

Press DISPLAY repeatedly to switch between the following settings:

: disc title— : disc artist name— : track

title—

track artist name—Simple display

# If specific information has not been recorded on a CD TEXT disc, title or name is not displayed.

: track artist name— : disc title and

: disc artist name— : track title and :

Scrolling text information in the display

This unit can display the first 24 letters of disc title, disc artist name, track title and track artist name. When the text information is longer than 24 letters, you can scroll the text information as follows. ! When the source icon is turned off, this

unit can display the first 30 letters of text information.

% Press DISPLAY and hold until the text information begins to scroll through the display.

The titles scroll.

1 Press LIST to switch to the disc title list mode during the playback display.

# If you want to display the track title list of the currently playing disc, push MULTI-CONTROL right.

2 Use MULTI-CONTROL to select the desired disc title of CD TEXT.

Turn to change the disc title; press to play.

3 Push MULTI-CONTROL right to switch to the track title list.

# Push MULTI-CONTROL left to return to the disc title list.

4 Use MULTI-CONTROL to select the desired track title.

Turn to change the track title; press to play.

# You can also change the track title by pushing MULTI-CONTROL up or down. # If you do not operate the list within about 30 seconds, the track title list mode is canceled automatically.

Note

When Ever Scroll is set to ON at the initial setting, text information scrolls continuously in the display. Refer to Switching the Ever Scroll on page 92.

Selecting tracks from the track title list

Track title list lets you see the list of track titles on a CD TEXT disc and select one of them to play back.

Page 63

Playing songs on iPod

Section

English

Listening to songs on your iPod

You can use this unit to control an iPod adapter, which is sold separately.

These are the basic steps necessary to operate an iPod adapter. More advanced iPod adapter operation is explained starting on Introduction of advanced iPod adapter operation on page 65.

1 Song number indicator

Shows the number of song played in the selected list.

2 Play time indicator

Shows the elapsed playing time of the current song.

3 Album title indicator

Shows the title of the currently playing album.

1 Press SOURCE to select the iPod. Press SOURCE until you see iPod displayed.

2 To perform fast forward or reverse, push and hold MULTI-CONTROL left or right.

of the current song. Pushing again will skip to the previous song.

Browsing for a song

The operation of this unit to control an iPod is designed to be as close to the operation of the iPod as possible for easy operation and song search.

1 Press LIST to switch to the top menu of the list search.

2 Use MULTI-CONTROL to select a category.

Turn to change the category; press to select.

Playlists (playlists)—Artists (artists)— Albums (albums)—Songs (songs)—Genres

(genres) List from the selected category is displayed.

# You can start playback throughout the selected category by pressing and holding MULTI-CONTROL. # You can also change the category by pushing MULTI-CONTROL up or down. # You can also select the category by pushing MULTI-CONTROL right. # To return to the previous list, push MULTI-CONTROL left. # To go to the top menu of the list search, push and hold MULTI-CONTROL left. # If you do not operate the list within about 30 seconds, the list search is cancelled automatically.

3 To skip back or forward to another song, push MULTI-CONTROL left or right.

Pushing MULTI-CONTROL right skips to the start of the next song. Pushing MULTI-CONTROL left once skips to the start

Page 64

Section

Playing songs on iPod

Searching for a song

1 Press LIST to switch to the top menu of the list search.

2 Use MULTI-CONTROL to select a Genres, Artists, Albums or Songs from among the categories.

Turn to change the category; press to select. List from the selected category is displayed.

3 Use MULTI-CONTROL to select a song, album, artist or genre.

Turn to change the item; press to select. List from the selected item is displayed.

# If you select Songs (songs), playback starts in- stantly from the selected one.

4 Repeat step 3 to find a song you want to listen to.

Selecting a playlist

You can select a playlist from your iPod playlist.

1 Press LIST to switch to the top menu of the list search.

2 Use MULTI-CONTROL to select a Playlists from among the categories.

Turn to change the category; press to select. List from Playlists (playlists) is displayed.

4 Use MULTI-CONTROL to select a song from the selected playlist.

Turn to change the song; press to play.

# If no songs have been stored in playlist, STOP is displayed and playback stops.

Displaying text information on iPod

Text information recorded on the iPod can be displayed.

% Press DISPLAY.

Press DISPLAY repeatedly to switch between the following settings:

: album title— : song title— : artist name

—

: artist name and : album title— : song title and and

: album title—Simple display

# If the characters recorded on the iPod are not compatible with this unit, those characters will not be displayed.

Notes

! You can scroll to the left the text information

by pressing and holding DISPLAY.

! When Ever Scroll is set to ON at the initial set-

ting, text information scrolls continuously in the display. Refer to Switching the Ever Scroll on page 92.

: artist name— : song title

3 Use MULTI-CONTROL to select a playlist.

Turn to change the playlist; press to select. Song list from the selected playlist is displayed.

# You can start playback throughout the selected playlist by pressing and holding MULTI-CONTROL.

Page 65

Playing songs on iPod

Section

English

Introduction of advanced iPod adapter operation

1 Function display

Shows the function status.

1 Press MULTI-CONTROL to display the main menu. FUNCTION, AUDIO and ENTERTAINMENT

appear on the display.

2 Use MULTI-CONTROL to select FUNCTION.

Turn to change the menu option; press to select. The function name appears on the display.

3 Turn MULTI-CONTROL to select the function.

Turn MULTI-CONTROL clockwise or counterclockwise to switch between the functions in the following order: Play mode (repeat play)—Shuffle mode (random play)—Pause (pause)

# To return to the playback display, press BAND.

Note

If you do not operate the function within about 30 seconds, the display is automatically returned to the playback display.

Repeating play

For playback of the songs on the iPod, there are two repeat play ranges: Repeat one (re-

peat one song) and Repeat all (repeat all songs in the list). ! While Play mode is set to Repeat one, you

cannot select the other songs.

1 Use MULTI-CONTROL to select Play mode in the function menu. Play mode appears in the display.

2 Press MULTI-CONTROL to select the repeat range.

Press MULTI-CONTROL repeatedly until the desired repeat range appears in the display.

! Repeat one – Repeat just the current song ! Repeat all – Repeat all songs in the se-

lected list

Playing songs in a random order (shuffle)

For playback of the songs on the iPod, there are two random play methods: Shuffle Songs (play back songs in a random order) and Shuffle Albums (play back albums in a random order).

1 Use MULTI-CONTROL to select Shuffle mode in the function menu. Shuffle mode appears in the display.

2 Press MULTI-CONTROL to select your favorite setting.

Press MULTI-CONTROL repeatedly until the desired setting appears in the display.

! Shuffle Songs – Play back songs in a ran-

dom order within the selected list

! Shuffle Albums – Select an album ran-

domly, and then play back all the songs in it in order

! Shuffle OFF – Cancel the random play

Page 66

Section

Playing songs on iPod

Pausing a song

Pause lets you temporarily stop playback of a song.

1 Use MULTI-CONTROL to select Pause in the function menu. Pause appears in the display.

2 Press MULTI-CONTROL to turn pause on.

Playback of the current song pauses.

# To turn pause off, press MULTI-CONTROL again.

Page 67

213

XM tuner

Section

English

Listening to XM Satellite Radio

You can use this unit to control an XM satellite digital tuner (GEX-P920XM), which is sold separately.

For details concerning operation, refer to the XM tuner’ s operation manuals. This section provides information on XM operations with this unit which differs from that described in the XM tuner’s operation manual. ! With this unit, you can operate two addi-

tional functions: XM channel direct selection and preset channel list.

1 XM band indicator

Shows the XM band which has been selected.

2 XM preset number indicator

Shows what XM preset has been selected.

1 Press SOURCE to select the XM. Press SOURCE until you see XM displayed.

2 Press BAND to select a XM band.

Press BAND repeatedly until the desired XM band is displayed, XM-1, XM-2 or XM-3.

3 To perform tuning, push MULTI-CONTROL left or right.

The channels move up or down step by step. Channels that cannot currently be selected are skipped, and the next channel is selected.

# If you push and hold MULTI-CONTROL left or right, you can increase or decrease channel number continuously. # You can also perform tuning from a desired channel category. (Refer to Selecting a channel in the channel category on page 69.)

Selecting an XM channel directly

You can select an XM channel directly by entering the desired channel number.

1 Press DIRECT on the remote control. CHANNEL INPUT appears in the display.

3 XM channel select setting indicator

Shows what channel select setting has been selected. CH is displayed when Channel number is selected, and CAT is displayed when Category is selected.

4 XM channel number indicator

Shows to which XM channel number the tuner is tuned.

5 XM text information

Shows the text information of broadcast channel.

2 Use 0–9 on the remote control to input the desired channel number.

# To cancel the input numbers, press CLEAR on the remote control.

3 While the input number is displayed, press DIRECT on the remote control.

The entered XM channel is selected.

Page 68

Section

XM tuner

Introduction of advanced XM tuner operation

1 Function display

Shows the function status.

1 Press MULTI-CONTROL to display the main menu. FUNCTION, AUDIO and ENTERTAINMENT

appear on the display.

2 Use MULTI-CONTROL to select FUNCTION. Channel mode appears on the display.

# To return to the channel display, press BAND.

Note

If you do not operate the function within about 30 seconds, the display is automatically returned to the channel display.

Storing and recalling broadcast stations

You can easily store up to six broadcast stations for later recall.

1 When you find a station that you want to store in memory press LIST to switch to the preset channel list mode.

2 Use MULTI-CONTROL to store the selected station in memory.

Turn to change the preset number; press and hold to store. The XM preset number you have selected will flash and then remain lit. The selected station has been stored in memory.

# If you do not operate the list within about 30 seconds, the preset channel list mode is canceled automatically.

Notes

! Up to 18 stations, six for each of three XM

bands can be stored in memory.

! You can also store stations assigned to preset

tuning numbers by pressing and holding one of the preset tuning buttons 1–6 on the remote control.

Switching the XM display

% Press DISPLAY to switch the XM display.

Each press of DISPLAY changes the XM display in the following order: Text information (channel name)—Artist name and text information—Song title and text information—Category name and text information —Simple display

Switching the XM channel select mode

You have two methods for selecting a channel: by number and by categoy. When selecting by number, channels in any category can be selected. Select by category to narrow your search down to only channels in a particular category.

1 Use MULTI-CONTROL to select FUNCTION. Channel mode appears on the display.

Page 69

XM tuner

Section

English

2 Press MULTI-CONTROL to select the desired channel select setting.

Press MULTI-CONTROL repeatedly to switch between the following channel select settings: Channel number (channel number select setting)—Category (channel category select setting)

# You can also select the XM channel select setting by pressing and holding CLOCK.

Selecting a channel in the channel category

1 Select the channel select settings to Category.

Refer to Switching the XM channel select mode on the previous page.

2 Push MULTI-CONTROL up or down to select the desired channel category.

3 Push MULTI-CONTROL left or right to select the desired channel in the selected channel category.

% Push MULTI-CONTROL up or down to select RADIO ID from channel category.

# If you select another channel, display of the ID code is canceled. # Display of the ID code repeats displaying RADIO ID and the ID code one after the other.

Selecting stations from the preset channel list

The preset channel list lets you see the list of preset stations and select one of them to receive.

1 Press LIST to switch to the preset channel list mode during the channel display.

2 Use MULTI-CONTROL to select the desired station.

Turn to change the station; press to select.

# You can also change the station by pushing MULTI-CONTROL up or down. # If you do not operate the list within about 30 seconds, the preset channel list mode is canceled automatically.

Displaying the Radio ID

Channel number select setting

If you select CH : 000, the ID code is displayed.

% Push MULTI-CONTROL left or right to select CH : 000.

Channel category select setting

RADIO ID is provided as a channel category for displaying the ID code.

Notes

! You can also recall stations assigned to preset

tuning numbers by pushing MULTI-CONTROL up or down during the channel display.

! You can also recall stations assigned to preset

tuning numbers by pressing one of the preset tuning buttons 1–6 on the remote control.

Page 70

213

Section

SIRIUS Satellite Radio tuner

Listening to SIRIUS Satellite Radio

This unit can control a SIRIUS Satellite Radio tuner (sold separately).

When the SIRIUS tuner is used together with this unit, some operations differ slightly from those described in the SIRIUS operation manual. This manual provides information on these points. For all other information on using the SIRIUS tuner, please refer to the SIRIUS operation manual. ! With this unit, you can operate one addi-

tional function: SIRIUS channel direct selection. Refer to Selecting a SIRIUS channel directly on this page.

1 SIRIUS band indicator

Shows the SIRIUS band which has been selected.

2 SIRIUS preset number indicator

Shows what SIRIUS preset has been selected.

3 SIRIUS channel select setting indicator

Shows what channel select setting has been selected. CH is displayed when Channel number is selected, and CAT is displayed when Category is selected.

4 SIRIUS channel number indicator

Shows to which SIRIUS channel number the tuner is tuned.

5 SIRIUS channel name

Shows the channel name of broadcast channel.

1 Press SOURCE to select SIRIUS. Press SOURCE until you see SIRIUS displayed.

2 Press BAND to select a SIRIUS band.

Press BAND repeatedly until the desired SIRIUS band is displayed, SR-1, SR-2 or SR-3.

3 To perform tuning, push MULTI-CONTROL left or right.

The channels move up or down step by step. Channels that cannot currently be selected are skipped, and the next channel is selected.

Note

It may take a few seconds before you can hear anything while this unit acquires and processes the satellite signal when you change the source to SIRIUS tuner or select a channel.

Selecting a SIRIUS channel directly

You can select a SIRIUS channel directly by entering the desired channel number.

1 Press DIRECT on the remote control. CHANNEL INPUT appears in the display.

2 Use 0–9 on the remote control to input the desired channel number.

# To cancel the input numbers, press CLEAR on the remote control.

3 While the input number is displayed, press DIRECT on the remote control.

The entered SIRIUS channel is selected.

Page 71

SIRIUS Satellite Radio tuner

Section

English

Introduction of advanced SIRIUS tuner operation

1 Function display

Shows the function status.

1 Press MULTI-CONTROL to display the main menu. FUNCTION, AUDIO and ENTERTAINMENT

appear on the display.

2 Use MULTI-CONTROL to select FUNCTION. Channel mode appears on the display.

# To return to the channel display, press BAND.

Note

If you do not operate the function within about 30 seconds, the display is automatically returned to the channel display.

% Press and hold DISPLAY to select the scroll setting.

Press and hold DISPLAY selects scroll setting in the following order: Continuous scroll setting—One-time scroll setting

Storing and recalling broadcast stations

If you press any of the preset tuning buttons 1–6 you can easily store up to six broadcast stations for later recall with the touch of a button. ! Only the remote control can operate this

function.

% When you find a station that you want to store in memory press one of preset tuning buttons 1–6 and hold until the SIRIUS preset number stops flashing.

The number you have pressed will flash in the SIRIUS preset number indicator and then remain lit. The selected station has been stored in memory. The next time you press the same preset tuning button the station is recalled from memory.

Switching the SIRIUS display

% Press DISPLAY to switch the SIRIUS display.

Each press of DISPLAY changes the SIRIUS display in the following order: Channel number—Channel name—Category name—Artist name—Song title/program title —Composer name—Simple display

Switching the scroll setting

You can select the scroll setting, one is the continuous scroll, the other is one-time scroll.

Notes

! Up to 18 stations, six for each of three SIRIUS

bands can be stored in memory.

! You can also recall stations assigned to preset

tuning buttons 1–6 by pushing MULTI-CONTROL up or down.

Page 72

Section

SIRIUS Satellite Radio tuner

Selecting the SIRIUS channel select mode

1 Use MULTI-CONTROL to select FUNCTION. Channel mode appears on the display.

2 Press MULTI-CONTROL to select the desired channel select setting.

Press MULTI-CONTROL repeatedly to switch between the following channel select settings: Channel number (channel number select setting)—Category (channel category select setting)

# You can also select the SIRIUS channel select setting by pressing and holding CLOCK.

Selecting a channel in the channel category

1 Select the channel select settings to Category.

Refer to Selecting a channel in the channel category on this page.

2 Push MULTI-CONTROL up or down to select the desired channel category.

3 Push MULTI-CONTROL left or right to select the desired channel in the selected channel category.

Note

To select CH : 000, set the channel select setting to Channel number. About the channel select setting, refer to Selecting the SIRIUS channel se- lect mode on this page

Displaying the Radio ID

If you select CH : 000, the ID code is displayed.

% Push MULTI-CONTROL left or right to select CH : 000.

Page 73

213

TV tuner

Section

English

Watching the television

You can use this unit to control a TV tuner, which is sold separately.

For details concerning operation, refer to the TV tuner ’s operation manual. This section provides information on TV operations with this unit which differs from that described in the TV tuner ’s operation manual.

1 Band indicator

Shows which band the TV tuner is tuned to.

2 Preset number indicator

Shows which preset has been selected.

3 Channel indicator

Shows which channel the TV tuner is tuned.

1 Press SOURCE to select the TV.

Press SOURCE until you see Television dis- played.

# You can cancel seek tuning by pushing MULTI-CONTROL left or right. # If you push and hold MULTI-CONTROL left or right, you can skip broadcasting channels. Seek tuning starts as soon as you release

MULTI-CONTROL.

2 Press BAND to select a band.

Press BAND until the desired band is displayed, TV-1 or TV-2.

3 To perform manual tuning, push MULTI-CONTROL left or right.

The channels move up or down step by step.

4 To perform seek tuning, push and hold MULTI-CONTROL left or right for about one second and release.

The tuner will scan the channels until a broadcast strong enough for good reception is found.

Page 74

Section

TV tuner

Introduction of advanced TV tuner operation

1 Function display

Shows the function status.

1 Press MULTI-CONTROL to display the main menu. FUNCTION, AUDIO and ENTERTAINMENT

appear on the display.

2 Use MULTI-CONTROL to select FUNCTION. BSSM appears on the display.

# To return to the channel display, press BAND.

Note

If you do not operate the function within about 30 seconds, the display is automatically returned to the channel display.

Storing and recalling broadcast stations

You can easily store up to 12 broadcast stations for later recall.

1 When you find a station that you want to store in memory press LIST to switch to the preset channel list mode.

2 Use MULTI-CONTROL to store the selected station in memory.

Turn to change the preset number; press and hold to store. The preset number you have selected will flash and then remain lit. The selected station has been stored in memory.

# If you do not operate the list within about 30 seconds, the preset channel list mode is canceled automatically.

Notes

! Up to 24 stations, 12 for each of two TV bands,

can be stored in memory.

! You can also store stations assigned to preset

tuning numbers 1–6 by pressing and holding one of the preset tuning buttons 1–6 on the remote control.

Storing the strongest broadcast stations sequentially

1 Use MULTI-CONTROL and select FUNCTION to display BSSM.

2 Press MULTI-CONTROL to turn BSSM on. Searching is displayed. While Searching is

displayed, the 12 strongest broadcast stations will be stored in order from the lowest channel up. When finished, the preset channel list appears.

# To cancel the storage process, press

MULTI-CONTROL.

3 Use MULTI-CONTROL to select the desired station.

Turn to change the station; press to select.

# You can also change the station by pushing MULTI-CONTROL up or down.

Page 75

TV tuner

# If you do not operate the list within about 30 seconds, the preset channel list mode is canceled automatically.

Note

Storing broadcast stations with BSSM may replace broadcast stations you have saved using P01–P12.

Selecting stations from the preset channel list

The preset channel list lets you see the list of preset stations and select one of them to receive.

1 Press LIST to switch to the preset channel list mode during the channel display.

Section

English

2 Use MULTI-CONTROL to select the desired station.

Turn to change the station; press to select.

# You can also change the station by pushing MULTI-CONTROL up or down. # If you do not operate the list within about 30 seconds, the preset channel list mode is canceled automatically.

Notes

! You can also recall stations assigned to preset

tuning numbers by pushing MULTI-CONTROL up or down during the channel display.

! You can also recall stations assigned to preset

tuning numbers 1–6 by pressing one of the preset tuning buttons 1–6 on the remote control.

Page 76

35421

Section

DVD Player

Playing a disc

You can use this unit to control a DVD player or multi-DVD player, which is sold separately.

For details concerning operation, refer to the DVD player’s or multi-DVD player’s operation manual. This section provides information on DVD operations with this unit which differs from that described in the DVD player’sor multi-DVD player’s operation manual. These are the basic steps necessary to play a DVD video with your DVD player. More advanced DVD video operation is explained starting on the next page.

1 DVD-V/VCD/CD/MP3/WMA indicator

Shows the type of disc currently playing.

2 Disc number indicator

Shows the disc number currently playing when using a multi-DVD player.

3 Title/Folder/Disc number indicator

Shows the title (when playing DVD video), folder (when playing MP3 or WMA) or disc (when playing video CD or CD) of the selection currently playing.

5 Play time indicator

Shows the elapsed playing time of the current track.

1 Press SOURCE to select the DVD player/ multi-DVD player. Press SOURCE until you see DVD displayed.

2 To perform fast forward or reverse, push and hold MULTI-CONTROL left or right.

3 To skip back or forward to another chapter/track, push MULTI-CONTROL left or right.

Selecting a disc

! You can operate this function only when a

multi-DVD player is connected to this unit.

% Push MULTI-CONTROL up or down to select the desired disc.

Selecting a folder

! You can operate this function only when a

DVD player which is corresponding to MP3/WMA playback is connected to this unit.

% Push MULTI-CONTROL up or down to select a folder.

4 Chapter/track number indicator

Shows the chapter (when playing DVD video) or track (when playing video CD, CD, MP3 or WMA) currently playing.

Page 77

DVD Player

Section

English

Introduction of advanced DVD player operation

1 Function display

Shows the function status.

1 Press MULTI-CONTROL to display the main menu. FUNCTION, AUDIO and ENTERTAINMENT

appear on the display.

2 Use MULTI-CONTROL to select FUNCTION.

Turn to change the menu option; press to select. The function name appears on the display.

3 Turn MULTI-CONTROL to select the function.

Turn MULTI-CONTROL clockwise or counterclockwise to switch between the functions in the following order:

During DVD video or Video CD playback

Play mode (repeat play)—Pause (pause)

During CD playback

Play mode (repeat play)—Random mode (random play)—Scan mode (scan play)—

Pause (pause)—ITS play mode (ITS play)— ITS memory (ITS input)—Title Input (disc

title input)

During MP3/WMA playback

Play mode (repeat play)—Random mode (random play)—Scan mode (scan play)— Pause (pause)

# To return to the playback display, press BAND.

Note

When using this unit with multi-DVD player, you can switch to ITS play mode, ITS memory and Title Input.

Repeating play

! During PBC playback of Video CDs, this

function cannot be operated.

1 Use MULTI-CONTROL to select Play mode in the function menu. Play mode appears in the display.

2 Press MULTI-CONTROL to select the repeat range.

During DVD video playback

Press MULTI-CONTROL repeatedly until the desired repeat range appears in the display.

! Disc repeat – Repeat the current disc ! Chapter repeat – Repeat just the current

chapter

! Title repeat – Repeat just the current title

During Video CD or CD playback

Press MULTI-CONTROL repeatedly until the desired repeat range appears in the display.

! Disc repeat – Repeat the current disc ! Track repeat – Repeat just the current

track

During MP3/WMA playback

Press MULTI-CONTROL repeatedly until the desired repeat range appears in the display.

! Disc repeat – Repeat the current disc ! Folder repeat – Repeat the current folder ! Track repeat – Repeat just the current

track

Notes

! If you select other discs during repeat play,

the repeat play range changes to Disc repeat.

Page 78

Section

DVD Player

! During video CD or CD playback, if you per-

form track search or fast forward/reverse during Track repeat, the repeat play range changes to Disc repeat.

! During MP3/WMA playback, if you select an-

other folder during repeat play, the repeat play range changes to Disc repeat.

! During MP3/WMA playback, if you perform

track search or fast forward/reverse during Track repeat, the repeat play range changes to Folder repeat.

Pausing disc playback

1 Use MULTI-CONTROL to select Pause in the function menu. Pause appears in the display.

2 Press MULTI-CONTROL to turn pause on.

Playback of the current track pauses.

# To turn pause off, press MULTI-CONTROL again.

Playing tracks in random order

! You can operate this function during CD/

MP3/WMA playback.

1 Use MULTI-CONTROL to select Random mode in the function menu. Random mode appears in the display.

Scanning tracks of a CD/ MP3/WMA

! You can operate this function during CD/

MP3/WMA playback.

1 Use MULTI-CONTROL to select Scan mode in the function menu. Scan mode appears in the display.

2 Press MULTI-CONTROL to turn scan play on.

The first 10 seconds of each track is played.

3 When you find the desired track press MULTI-CONTROL to turn scan play off.

The track will continue to play.

# If the display has automatically returned to the playback display, select Scan mode again by using MULTI-CONTROL.

Using ITS playlist and disc title functions

! You can operate these functions only when

a multi-DVD player is connected to this unit.

! This function differs slightly from ITS play-

back with a multi-CD player. With multiDVD player, ITS playback applies only to the CD playing. For details, refer to Using ITS playlists on page 59.

2 Press MULTI-CONTROL to turn random play on.

Tracks will play in a random order.

# To turn random play off, press MULTI-CONTROL again.

Using disc title functions

You can input CD titles and display the titles. Then you can easily search for and play a desired disc. ! You can operate this function during CD

playback.

Page 79

DVD Player

Entering disc titles

Disc title input lets you input CD titles up to 10 letters long into the DVD player. For details concerning operation, refer to Entering disc ti- tles on page 60. ! You can operate this function only when a

DVD player is connected to this unit.

! When playing a CD TEXT disc on a CD TEXT

compatible DVD player, you cannot switch to disc title input. The disc title will have already been recorded on a CD TEXT disc.

Section

English

Page 80

Section

Audio Adjustments

Adjusting the audio easily

The following functions let you easily adjust your audio system to match the car interior acoustic characteristics, which vary depending on the type of car.

! Recalling equalizer curves ! Using the position selector (Position) ! Adjusting equalizer curves

Adjusting the audio finely

By carrying out the following settings/adjustments in the order shown, you can create a finely-tuned sound field effortlessly.

! Using the position selector (Position) ! Using balance adjustment (Fader) ! Using subwoofer output (Subwoofer1) ! Adjusting subwoofer settings

(Subwoofer2)

! Adjusting low pass filter attenuation slope

(Subwoofer3)

! Setting the high pass filter for front speakers

(Front HPF, Front HPF FREQ.)

! Setting the high pass filter for rear speakers

(Rear HPF, Rear HPF FREQ.)

! Recalling equalizer curves ! Adjusting equalizer curves ! Adjusting 16-band graphic equalizer

(FREQ.)

Extra functions

These functions are helpful in adjusting the sound to suit your system or your personal preferences.

! Using BBE sound (BBE) ! Using compression and BMX (COMP/BMX) ! Adjusting loudness (Loudness) ! Adjusting source levels (SLA) ! Using auditory user interface

(AUI sound level)

Introduction of audio adjustments

Important

When phone is selected as a source, no audio adjustments, except balance adjustment, are possible.

1 Audio display

Shows the audio adjustment status.

1 Press MULTI-CONTROL to display the main menu. FUNCTION, AUDIO and ENTERTAINMENT

appear on the display.

2 Use MULTI-CONTROL to select AUDIO.

Turn to change the menu option; press to select. The audio function name appears on the display.

3 Turn MULTI-CONTROL to select the audio function.

Turn MULTI-CONTROL clockwise or counterclockwise to switch between the audio functions in the following order:

Page 81

Audio Adjustments

Section

English

Fader (balance adjustment)—Position (position selector)—TA Mode (time alignment setting)—Time Alignment (time alignment adjusting)—Loudness (loudness)—Powerful (graphic equalizer adjustment)—FREQ. (16band graphic equalizer adjustment)—

Subwoofer1 (subwoofer on/off)— Subwoofer2 (subwoofer cut-off frequency)— Subwoofer3 (subwoofer slope)—Front HPF

(front high pass filter slope)— Front HPF FREQ. (front high pass filter cut-off frequency)—Rear HPF (rear high pass filter slope)—Rear HPF FREQ. (rear high pass filter cut-off frequency)—BBE (BBE)—COMP/BMX (Compression and BMX)—SLA (source level adjustment)—AUI sound level (auditory user interface)

# When selecting OFF in TA Mode, you cannot switch to Time Alignment.

# You can select Subwoofer2 and Subwoofer3 only when subwoofer output is turned on in Subwoofer1.

# When tuner, television or AUX is selected as a source, you cannot select COMP/BMX. # When selecting the FM tuner as the source, you cannot switch to SLA. # To return to the display of each source, press BAND.

Note

If you do not operate the audio function within about 30 seconds, the display is automatically returned to the source display.

Using the position selector

One way to assure a more natural sound is to clearly position the stereo image, putting you right in the center of the sound field. The position selector function lets you automatically adjust the speakers’ output levels and inserts a delay time to match the number and position of occupied seats.

1 Use MULTI-CONTROL to select Position. Position appears in the display.

2 Push MULTI-CONTROL left, right, up or down to select a listening position.

Direction Display Position

Left Front Left Front seat left

Right Front Right Front seat right

Up Front Front seats

Down All All seats

# To cancel the selected listening position, push MULTI-CONTROL in the same direction again.

Using balance adjustment

You can change the fader/balance setting so that it can provide you an ideal listening environment in all occupied seats.

1 Use MULTI-CONTROL to select Fader. Fader appears in the display.

# If the balance setting has been previously adjusted, Balance will be displayed.

2 Push MULTI-CONTROL up or down to adjust front/rear speaker balance.

Each time MULTI-CONTROL is pushed up or down, the front/rear speaker balance moves towards the front or rear. Front 25 to Rear 25 is displayed as the front/ rear speaker balance moves from front to rear.

# Front/Rear 0 is the proper setting when only two speakers are used.

3 Push MULTI-CONTROL left or right to adjust left/right speaker balance.

Each time MULTI-CONTROL is pushed left or right, the left/right speaker balance moves towards the left or right.

Page 82

345

Section

Audio Adjustments

Left 25 to Right 25 is displayed as the left/ right speaker balance moves from left to right.

Using the time alignment

The time alignment lets you adjust the distance between each speaker and the listening position to match the type of car. There are five types of car stored which you can easily recall at any time.

1 Use MULTI-CONTROL to select TA Mode. TA Mode appears in the display.

2 Push MULTI-CONTROL left or right to select the type of car.

Each time MULTI-CONTROL is pushed left or right, types of car are selected in the following order: Sedan (sedan)—Wagon (wagon)—Mini-Van (mini van)—Custom (custom)—OFF (off)— SUV (SUV)

! Custom is an adjusted time alignment that

you can create for yourself.

Adjusting the time alignment

You can adjust the distance between each speaker and the selected position. ! An adjusted time alignment is memorized

in Custom.

1 Use MULTI-CONTROL to select TA Mode. TA Mode appears in the display.

2 Press MULTI-CONTROL to select a unit of distance.

Each press of MULTI-CONTROL selects the unit of distance in the following order:

inch (inch)—cm (centimeter)

3 Use MULTI-CONTROL to select Time Alignment. Time Alignment appears in the display.

# Can't adjust TA. Set position FL/FR appears when neither Front Left nor Front Right is selected in the position selector mode (Position). # When selecting OFF in TA Mode, you cannot switch to Time Alignment.

4 Push MULTI-CONTROL left or right to select the speaker to be adjusted.

Each time MULTI-CONTROL is pushed left or right, the speaker is selected in the following order:

1 Front speaker left 2 Front speaker right 3 Rear speaker right 4 Subwoofer right 5 Subwoofer left 6 Rear speaker left

Front speaker left—Front speaker right—Rear speaker right—Rear speaker left—Subwoofer left—Subwoofer right

# You cannot select subwoofer left and subwoofer right when the subwoofer output is off.

5 Push MULTI-CONTROL up or down to adjust the distance between the selected speaker and the listening position.

Each time MULTI-CONTROL is pushed up or down, the distance increases or decreases.

160.0inch to 0.0inch is displayed as the distance is increased or decreased, if you have selected inches (inch).

Page 83

Audio Adjustments

Section

English

400.00cm to 0.00cm is displayed as the distance is increased or decreased, if you have selected centimeters (cm).

# You can adjust the distance for the other speakers in the same way.

6 Press BAND to cancel the time alignment mode.

Using subwoofer output

This unit is equipped with a subwoofer output which can be turned on or off. When a subwoofer is connected to this unit, turn the subwoofer output on. The subwoofer output phase can be switched between normal and reverse.

1 Use MULTI-CONTROL to select Subwoofer1. Subwoofer1 appears in the display.

2 Press MULTI-CONTROL to turn subwoofer output on. ON appears in the display. Subwoofer output

is now on.

# To turn subwoofer output off, press

MULTI-CONTROL again.

1 Use MULTI-CONTROL to select Subwoofer2. Subwoofer2 appears in the display.

# When the subwoofer output is on, you can select Subwoofer2.

2 Push MULTI-CONTROL left or right to select cut-off frequency.

Each time MULTI-CONTROL is pushed left or right, cut-off frequencies are selected in the following order: 50—63—80—100—125—160—200 (Hz) Only frequencies lower than those in the selected range are outputted from the subwoofer.

3 Push MULTI-CONTROL up or down to adjust the output level of the subwoofer.

Each time MULTI-CONTROL is pushed up or down, subwoofer level increases or decreases. +6 to –24 is displayed as the level is increased or decreased.

Adjusting low pass filter attenuation slope

When the subwoofer output is on, you can adjust the continuity of sound between speaker units.

3 Push MULTI-CONTROL left or right to select stereo or monaural.

Push MULTI-CONTROL left to select monaural and MONO appears in the display. Push

MULTI-CONTROL right to select stereo and STEREO appears in the display.

Adjusting subwoofer settings

When the subwoofer output is on, you can adjust the cut-off frequency and the output level of the subwoofer.

1 Use MULTI-CONTROL to select Subwoofer3. Subwoofer3 appears in the display.

# When the subwoofer output is on, you can select Subwoofer3.

2 Push MULTI-CONTROL up or down to select the phase of subwoofer output.

Push MULTI-CONTROL up to select normal phase and MULTI-CONTROL down to select reverse phase and

appears in the display. Push

appears in the display.

Page 84

Section

Audio Adjustments

3 Push MULTI-CONTROL left or right to select slope.

Each time MULTI-CONTROL is pushed left or right, slopes are selected in the following order: –18— –12— –6 (dB/oct.)

Note

When slope of subwoofer and high pass filter are –12dB, and same cut-off frequency, the phase is reversed 180 degrees at the cut-off frequency. In this case, reversing the phase assures improved sound continuity.

Using the high pass filter

When you do not want low sounds from the subwoofer output frequency range to play from the front or rear speakers, turn on the HPF (high pass filter). Only frequencies higher than those in the selected range are outputted from the front or rear speakers.

Muting the speaker units (filters)

You can mute front and rear speaker units (filters) separately. When speaker units (filters) are muted, no sound is outputted from those speakers. ! If you mute the selected speaker unit (fil-

ter), MUTE ON is displayed and no adjustments are possible.

! Even if any speaker unit (filter) is muted,

you can adjust the parameters for other speaker units (filters).

1 Use MULTI-CONTROL to select Front HPF (or Rear HPF). Front HPF (or Rear HPF) appears in the dis-

play.

2 Push and hold MULTI-CONTROL down to mute the selected speaker unit (filter). MUTE ON is displayed.

# To cancel the muting, push MULTI-CONTROL up.

Setting the high pass filter for front speakers

1 Use MULTI-CONTROL to select Front HPF. Front HPF appears in the display.

2 Push MULTI-CONTROL left or right to select slope.

Each time MULTI-CONTROL is pushed left or right, slopes are selected in the following order: –12— –6—Pass (0) (dB/oct.)

# If you set the slope to 0 dB/oct. (Pass), the audio signal bypasses the filter, so the filter does not have an effect.

3 Turn MULTI-CONTROL to select Front HPF FREQ. Front HPF FREQ. appears in the display.

4 Push MULTI-CONTROL left or right to select cut-off frequency.

Each time MULTI-CONTROL is pushed left or right, cut-off frequencies are selected in the following order: 50—63—80—100—125—160—200 (Hz) Only frequencies higher than those in the selected range are output from the front speakers.

5 Push MULTI-CONTROL up or down to adjust the output level of the front speakers.

Each time MULTI-CONTROL is pushed up or down, the level of the front speakers increases or decreases. 0 to –24 is displayed as the level is increased or decreased.

Page 85

Audio Adjustments

Section

English

Setting the high pass filter for rear speakers

1 Use MULTI-CONTROL to select Rear HPF. Rear HPF appears in the display.

2 Push MULTI-CONTROL left or right to select slope.

Each time MULTI-CONTROL is pushed left or right, slopes are selected in the following order: –12— –6—Pass (0) (dB/oct.)

# If you set the slope to 0 dB/oct. (Pass), the audio signal bypasses the filter, so the filter does not have an effect.

3 Turn MULTI-CONTROL to select Rear HPF FREQ. Rear HPF FREQ. appears in the display.

4 Push MULTI-CONTROL left or right to select cut-off frequency.

5 Push MULTI-CONTROL up or down to adjust the output level of the rear speakers.

Each time MULTI-CONTROL is pushed up or down, the level of the rear speakers increases or decreases. 0 to –24 is displayed as the level is increased or decreased.

Recalling equalizer curves

There are seven stored equalizer curves which you can easily recall at any time. Here is a list of the equalizer curves:

Display Equalizer curve

Powerful Powerful

Natural Natural

Vocal Vocal

Flat Flat

Custom1 Custom 1

Custom2 Custom 2

Super Bass Super bass

! Custom1 and Custom2 are adjusted equal-

izer curves that you create. Adjustments can be made with a 16-band graphic equalizer.

! When Flat is selected no supplement or

correction is made to the sound. This is useful to check the effect of the equalizer curves by switching alternatively between Flat and a set equalizer curve.

% Press EQ to select the equalizer.

Press EQ repeatedly to switch between the following equalizers:

Powerful—Natural—Vocal—Flat—Custom1 —Custom2—Super Bass

Adjusting equalizer curves

The factory supplied equalizer curves, with the exception of Flat, can be adjusted to a fine degree (nuance control).

Using the equalizer

The equalizer lets you adjust the equalization to match car interior acoustic characteristics as desired.

1 Use MULTI-CONTROL to select the graphic equalizer adjustment. Powerful appears in the display.

# If the equalizer curve has been previously selected, the curve of that previously selected will be displayed instead of Powerful.

Page 86

Section

Audio Adjustments

2 Push MULTI-CONTROL left or right to select an equalizer curve.

Each time MULTI-CONTROL is pushed left or right, equalizer curves are selected in the following order:

Powerful—Natural—Vocal—Flat—Custom1 —Custom2—Super Bass

3 Push MULTI-CONTROL up or down to adjust the equalizer curve.

Each time MULTI-CONTROL is pushed up or down, the equalizer curve increases or decreases respectively. +6 to –6 is displayed as the equalizer curve is increased or decreased.

# The actual range of the adjustments are different depending on which equalizer curve is selected. # The equalizer curve with all frequencies set to 0 cannot be adjusted.

Adjusting 16-band graphic equalizer

For Custom1 and Custom2 equalizer curves, you can adjust the level of each band. ! A separate Custom1 curve can be created

for each source. (The built-in CD player and the multi-CD player are set to the same equalizer adjustment setting automatically.) If you make adjustments when a curve other than Custom2 is selected, the equalizer curve settings will be memorized in Custom1.

! A Custom2 curve can be created common

to all sources. If you make adjustments when the Custom2 curve is selected, the

Custom2 curve will be updated.

1 Recall the equalizer curve you want to adjust.

See Recalling equalizer cur ves on the previous page.

2 Use MULTI-CONTROL to select 16-band graphic equalizer adjustment. FREQ. appears in the display.

3 Push MULTI-CONTROL left or right to select the equalizer band to adjust.

Each time MULTI-CONTROL is pushed left or right, equalizer bands are selected in the following order:

20—31.5—50—80—125—200—315—500— 800—1.25k—2k—3.15k—5k—8k—12.5k— 20k (Hz)

4 Push MULTI-CONTROL up or down to adjust the level of the equalizer band.

Each time MULTI-CONTROL is pushed up or down, the level of the equalization band increases or decreases. +6 to –6 is displayed as the level is increased or decreased.

# You can then select another band and adjust the level.

5 Press BAND to cancel the 16-band graphic equalizer adjustment.

Using BBE sound

With BBE, playback very close to the original sound can be obtained by correction with a combination of phase compensation and high-range boost for the delay of the high-frequency components and the amplitude deviation occurring during playback. This function makes it possible to reproduce the dynamic sound field as if you are listening to a live performance. With BBE sound processing technology, you can adjust the level of BBE.

1 Use MULTI-CONTROL to select BBE. BBE appears in the display.

Page 87

Audio Adjustments

Section

English

2 Press MULTI-CONTROL to turn BBE on.

# To turn BBE off, press MULTI-CONTROL again.

3 Push MULTI-CONTROL up or down to adjust the level of BBE.

Each time MULTI-CONTROL is pushed up or down, the level of BBE increases or decreases. +4 to –4 is displayed as the level is increased or decreased.

Note

Manufactured under license from BBE Sound, Inc. The mark BBE is a trademark of BBE Sound, Inc.

Using compression and BMX

Using the COMP (compression) and BMX functions let you adjust the sound playback quality of this unit. Each of the functions has a two-step adjustment. The COMP function balances the output of louder and softer sounds at higher volumes. BMX controls sound reverberations to give playback a fuller sound. Listen to each of the effects as you select through them and use the one that best enhances the playback of the track or CD that you are listening to. ! When tuner, television or AUX is selected

as a source, you cannot select

COMP/BMX.

1 Use MULTI-CONTROL to select COMP/BMX. COMP/BMX appears in the display.

2 Press MULTI-CONTROL to turn COMP/ BMX on.

# To turn COMP/BMX off, press

MULTI-CONTROL again.

3 Push MULTI-CONTROL left or right to select the desired setting.

Each time MULTI-CONTROL is pushed left or right, settings are selected in the following order:

COMP 1—COMP 2—BMX 1—BMX 2

Adjusting loudness

Loudness compensates for deficiencies in the low- and high-sound ranges at low volume.

1 Use MULTI-CONTROL to select Loudness. Loudness appears in the display.

2 Press MULTI-CONTROL to turn loudness on. ON appears in the display.

# To turn loudness off, press MULTI-CONTROL again.

Adjusting source levels

SLA (source level adjustment) lets you adjust the volume level of each source to prevent radical changes in volume when switching between sources. ! Settings are based on the FM tuner volume

level, which remains unchanged.

1 Compare the FM tuner volume level with the level of the source you wish to adjust.

2 Use MULTI-CONTROL to select SLA. SLA appears in the display.

# When selecting the FM tuner as the source, you cannot switch to SLA.

Page 88

Section

Audio Adjustments

3 Push MULTI-CONTROL up or down to adjust the source volume.

Each time MULTI-CONTROL is pushed up or down, source volume increases or decreases. +4 to –4 is displayed as the source volume is increased or decreased.

Notes

! The AM tuner volume level can also be ad-

justed with source level adjustments.

! The built-in CD player and the multi-CD player

are set to the same source level adjustment volume automatically.

! XM tuner and SIRIUS tuner are set to the

same source level adjustment volume automatically.

! External unit 1 and external unit 2 are set to

the same source level adjustment volume automatically.

Using auditory user interface

AUI (auditory user interface) lets you adjust the volume level of AUI sounds output when operating this unit. Depending on the operations, different AUI sounds are output. ! No AUI sounds are output when the

sources are off.

! No AUI sounds are output when the level is

set to 0.

1 Use MULTI-CONTROL to select AUI sound level. AUI sound level appears in the display.

2 Push MULTI-CONTROL up or down to adjust AUI sound level.

Each time MULTI-CONTROL is pushed up or down, AUI sound level increases or decreases. Level 0 to Level 12 is displayed as AUI sound level is increased or decreased.

Page 89

Initial Settings

Section

English

Adjusting initial settings

Using the initial settings, you can customize various system settings to achieve optimal performance from this unit.

1 Function display

Shows the function status.

1 Press SOURCE and hold until the unit turns off.

2 Press MULTI-CONTROL and hold until Language select appears in the display.

3 Turn MULTI-CONTROL to select one of the initial settings.

Turn MULTI-CONTROL clockwise or counterclockwise to switch between the functions in the following order:

Language select (language selection)— Calendar (calendar)—Clock (clock)— Warning tone (warning tone)— Face auto open (face auto open)—AUX1 (auxiliary input 1)— AUX2 (auxiliary input 2)— Dimmer (dimmer)—Brightness (brightness)

—Digital ATT (digital attenuator)—Mute (sound muting/attenuation)—Demonstration (feature demo)—Reverse mode (reverse mode)—Ever-scroll (ever scroll)—Calibration (RPM calibration)—BT AUDIO (Bluetooth audio)—Pin code input (pin code input)— Phone reset (phone reset) Use the following instructions to operate each particular setting.

# To cancel initial settings, press BAND.

Selecting the display language

For your convenience, this unit equips multiple language display. You can select the language best suited to your first language.

1 Use MULTI-CONTROL to select Language select. Language select appears in the display.

2 Press MULTI-CONTROL to select the language.

Each press of MULTI-CONTROL selects languages in the following order:

English—Français—Español

Setting the date

The calender display adjusted in this mode appears when the telephone source is selected or sources and the feature demo are off.

1 Use MULTI-CONTROL to select Calendar. Calendar appears in the display.

2 Push MULTI-CONTROL left or right to select the segment of the calendar display you wish to set.

Pushing MULTI-CONTROL left or right will se- lect one segment of the calendar display: Day—Month—Year As you select segments of the calendar display the segment selected will blink.

Page 90

Section

Initial Settings

3 Push MULTI-CONTROL up or down to set the date.

Pushing MULTI-CONTROL up will increase the selected day, month or year. Pushing MULTI-CONTROL down will decrease the selected day, month or year.

Setting the clock

Use these instructions to set the clock.

1 Use MULTI-CONTROL to select Clock. Clock appears in the display.

2 Push MULTI-CONTROL left or right to select the segment of the clock display you wish to set.

Pushing MULTI-CONTROL left or right will se- lect one segment of the clock display: Hour—Minute As you select segments of the clock display the segment selected will blink.

3 Push MULTI-CONTROL up or down to set the clock.

Pushing MULTI-CONTROL up will increase the selected hour or minute. Pushing MULTI-CONTROL down will decrease the selected hour or minute.

Notes

! You can match the clock to a time signal by

pressing MULTI-CONTROL. — If the minute is 00 to 29, the minutes are

rounded down. (e.g., 10:18 becomes 10:00.)

— If the minute is 30 to 59, the minutes are

rounded up. (e.g., 10:36 becomes 11:00.)

! Even when the sources are off, the clock dis-

play appears on the display. Pressing CLOCK when the sources and feature demo are off, turns the clock display on or off.

Switching the warning tone

If the front panel is not detached from the head unit within four seconds of turning off the ignition, a warning tone will sound. You can turn off the warning tone.

1 Use MULTI-CONTROL to select Warning tone. Warning tone appears in the display.

2 Press MULTI-CONTROL to turn warning tone on. ON appears in the display.

# To turn warning tone off, press

MULTI-CONTROL again.

Switching the face auto open

For theft protection, the front panel opens automatically and easily detaches. Face auto open is on as a default.

1 Use MULTI-CONTROL to select Face auto open. Face auto open appears in the display.

2 Press MULTI-CONTROL to turn the face auto open on. ON appears in the display.

# To turn the face auto open off, press

MULTI-CONTROL again.

Page 91

Initial Settings

Section

English

Switching the auxiliary setting

Auxiliary equipments connected to this unit can be activated individually. Set each AUX source to ON when using. About connecting or using auxiliar y equipments, refer to Using the AUX source on page 95.

1 Use MULTI-CONTROL to select AUX1/ AUX2. AUX1/AUX2 appears in the display.

2 Press MULTI-CONTROL to turn AUX1/ AUX2 on. ON appears in the display.

# To turn AUX off, press MULTI-CONTROL again.

Switching the dimmer setting

To prevent the display from being too bright at night, the display is automatically dimmed when the car’s headlights are turned on. You can turn the dimmer on or off.

1 Use MULTI-CONTROL to select Dimmer. Dimmer appears in the display.

2 Press MULTI-CONTROL to turn dimmer on. ON appears in the display.

# To turn dimmer off, press MULTI-CONTROL again.

Adjusting the brightness

You can adjust the display brightness. Initially this mode is set to 24.

1 Use MULTI-CONTROL to select Brightness. Brightness appears in the display.

2 Push MULTI-CONTROL left or right to adjust the brightness level.

Each time MULTI-CONTROL is pushed left or right, brightness level increases or decreases. 0 to 31 is displayed as the level is increased or decreased.

# When dimmer is functioning, the brightness level can be adjusted 0 to 21.

Correcting distorted sound

When listening to a CD or other source on which the recording level is high, setting the equalizer curve level to high may result in distortion. You can switch the digital attenuator to low to reduce distortion. ! Sound quality is better at the high setting

so this setting is usually used.

1 Use MULTI-CONTROL to select Digital ATT. Digital ATT appears in the display.

2 Press MULTI-CONTROL to select the digital attenuator level.

Pressing MULTI-CONTROL repeatedly will switch between High (high) and Low (low) and that status will be displayed.

Switching the sound muting/attenuation

Sound from this system is muted or attenuated automatically when the signal from the equipment with mute function is received. ! The sound is muted or attenuated, MUTE

or ATT are displayed and no audio adjustment is possible.

! Sound from this system returns to normal

when the muting or attenuation is canceled.

Page 92

Section

Initial Settings

1 Use MULTI-CONTROL to select Mute. Mute appears in the display.

2 Press MULTI-CONTROL to select the desired setting.

Press MULTI-CONTROL repeatedly to switch between the following settings:

! TEL mute – Muting ! 10dB ATT – Attenuation ! 20dB ATT – Attenuation (20dB ATT has a

stronger effect than 10dB ATT)

Switching the feature demo

The feature demo automatically starts when power to this unit is turned off while the ignition switch is set to ACC or ON.

1 Use MULTI-CONTROL to select Demonstration. Demonstration appears in the display.

2 Press MULTI-CONTROL to turn the feature demo on. ON appears in the display.

# To turn the feature demo off, press

MULTI-CONTROL again.

Notes

! Remember that if the feature demo continues

operating when the car engine is turned off, it may drain battery power.

! You can also turn on or off feature demo by

pressing DISPLAY while this unit is turned off. For more details, see Feature demo mode on page 13.

reverse, and then continue reversing every 10 seconds.

1 Use MULTI-CONTROL to select Reverse mode. Reverse mode appears in the display.

2 Press MULTI-CONTROL to turn the reverse mode on. ON appears in the display.

# To turn the reverse mode off, press

MULTI-CONTROL again.

Note

You can also turn on or off reverse mode by pressing BAND while this unit is turned off. For more details, see Reverse mode on page 13.

Switching the Ever Scroll

When Ever Scroll is set to ON, text information recorded on CD or iPod scrolls continuously in the display. Set to OFF if you prefer the information to scroll just once.

1 Use MULTI-CONTROL to select Ever-scroll. Ever-scroll appears in the display.

2 Press MULTI-CONTROL to turn the Ever Scroll on. ON appears in the display.

# To turn the Ever Scroll off, press

MULTI-CONTROL again.

Switching the reverse mode

If you do not perform an operation within about 30 seconds, screen indications start to

Page 93

Initial Settings

Section

English

Calibrating the RPMs

Follow the instructions below to measure the RPM of your vehicle and records them. By doing this, the tachometer of this unit can work properly. ! Tachometer of this unit cannot work if you

do not perform the RPM calibration.

! In some vehicles, the tachometer may not

work properly even if you performed the RPM calibration.

1 Park your vehicle in a safe place and be sure to apply the parking brake.

2 Use MULTI-CONTROL to select Calibration. Calibration appears in the display.

3 Keep RPMs of the engine at 4 000 rpm and press MULTI-CONTROL.

To measure the RPM of your vehicle properly, keep RPMs of the engine at 4 000 rpm for a few seconds. When the RPM calibration is completed, Completed is displayed.

# Some vehicles have a rev limiter that kicks in early (e.g., 3 000 rpm) while parking. In this case, perform RPM measurement at 2 000 rpm. # To switch between 4000 rpm and 2000 rpm, push MULTI-CONTROL left or right.

2 Press MULTI-CONTROL to turn the BT Audio source on. ON appears in the display.

# To turn the BT Audio source off, press MULTI-CONTROL again.

Entering PIN code for Bluetooth wireless connection

To connect your cellular phone to this unit via Bluetooth wireless technology, you need to enter PIN code on your phone to verif y the connection. The default code is 0000, but you can change this in this function. ! With some Bluetooth audio players, you

may be required to enter to this unit in advance PIN code of your Bluetooth audio player, in order to set this unit ready for a connection from your Bluetooth audio player.

1 Use MULTI-CONTROL to select Pin code input. Pin code input appears in the display.

2 Push MULTI-CONTROL up or down to select a number.

Pushing MULTI-CONTROL up or down changes the number.

Activating the BT Audio source

You need to activate the BT Audio source in order to use a Bluetooth audio player.

1 Use MULTI-CONTROL to select BT AUDIO. BT AUDIO appears in the display.

3 Push MULTI-CONTROL right to move the cursor to the next position.

When the number you want is displayed, push MULTI-CONTROL right to move the cursor to the next position and then select the next number. Push MULTI-CONTROL left to move backwards in the display.

4 After inputting PIN code (up to 16 digits), press MULTI-CONTROL.

PIN code you entered is now standby to be stored in memory.

Page 94

Section

Initial Settings

When you press MULTI-CONTROL again on the same display, the PIN code you entered is stored in this unit.

# Pusing MULTI-CONTROL right in the confir- mation display returns you to the PIN code input display, and you can change the PIN code.

Resetting the Bluetooth wireless technology module

Should you need to, you can reset the built-in Bluetooth wireless technology module. This will also clear all memories set in the telephone source, including Phone Book entries, number presets, registration assignments and the Call History. For instruction on this operation, refer to Clear- ing all memory on page 11.

Page 95

Other Functions

Section

English

Turning the clock display on or off

You can turn the clock display on or off.

% Press CLOCK to turn the clock display on or off.

Each press of CLOCK turns the clock display on or off.

Note

Even when the sources are off, the clock display appears on the display. Pressing CLOCK when the sources and feature demo are off, turns the clock display on or off.

Using the AUX source

This unit can control up to two auxiliary equipments such as VCR or portable devices (sold separately). When connected, auxiliary equipments are automatically read in as AUX sources and assigned to AUX1 or AUX2. The relationship between AUX1 and AUX2 sources is explained below.

About AUX1 and AUX2

You have two methods to connect auxiliary equipments to this unit.

AUX1 source:

When connecting auxiliary equipment using a stereo mini plug cable

% Insert the stereo mini plug into the AUX input jack on this unit.

For more details, refer to the installation manual. The allocation of this auxiliary equipment is automatically set to AUX1.

AUX2 source:

When connecting auxiliary equipment using an IP-BUS-RCA Interconnector (sold separately)

% Use an IP-BUS-RCA Interconnector such as the CD-RB20/CD-RB10 (sold separetely) to connect this unit to auxiliary equipment featuring RCA output.

For more details, refer to the IP-BUS-RCA Interconnector owner’s manual. The allocation of this auxiliary equipment is automatically set to AUX2.

# You can only make this type of connection if the auxiliary equipment has RCA outputs.

Selecting AUX as the source

% Press SOURCE to select AUX (AUX1 or AUX2) as the source.

Press SOURCE until AUX appears in the display.

# If the auxiliary setting is not turned on, AUX cannot be selected. For more details, see Switch- ing the auxiliary setting on page 91.

Setting the AUX title

The title displayed for each AUX1 or AUX2 source can be changed.

1 After you have selected AUX as the source, use MULTI-CONTROL and select FUNCTION to display Title Input.

2 Press DISPLAY to select the desired character type.

Page 96

231

Section

Other Functions

3 Push MULTI-CONTROL up or down to select a letter of the alphabet.

Each time MULTI-CONTROL is pushed up, alphabet, numbers or symbols are displayed in ascending order (A B C ...). Each time MULTI-CONTROL is pushed down, letters are displayed in descending order.

4 Push MULTI-CONTROL right to move the cursor to the next character position.

When the letter you want is displayed, push MULTI-CONTROL right to move the cursor to the next position and then select the next letter. Push MULTI-CONTROL left to move backwards in the display.

5 Move the cursor to the last position by pushing MULTI-CONTROL right after entering the title.

When you push MULTI-CONTROL right one more time, the entered title is stored in memory.

6 Press BAND to return to the playback display.

Using different entertainment displays

You can change the entertainment display to be displayed on all sources.

1 Entertainment display name

Shows name of the currently selected entertainment display.

2 Background display name

Shows name of the currently selected background display.

3 Source icon

Shows which source has been selected. ! Jacket art of current folder is displayed

when playing an MP3/WMA/AAC/WAV disc.

Setting the entertainment display

You can change the entertainment display and text color.

! When you select Vehicle Dynamics 1,

Vehicle Dynamics 2 or Vehicle Dynamics 3, perform the RPM ca-

libration. Refer to Calibrating the RPMs on page 93.

1 Press MULTI-CONTROL to display the main menu. FUNCTION, AUDIO and ENTERTAINMENT

appear on the display.

Page 97

Other Functions

Section

English

2 Use MULTI-CONTROL to select ENTERTAINMENT.

Turn to change the menu option; press to select.

3 Turn MULTI-CONTROL to select a desired entertainment display.

Turn MULTI-CONTROL clockwise or counterclockwise to switch between the displays in the following order: Standard (standard)—Visualizer1 (visualizer

1)—Visualizer2 (visualizer 2)—Visualizer3 (visualizer 3)—Visualizer4 (visualizer 4) — Visualizer5 (visualizer 5)—VisualizerRDM (random visualizer)—LevelMeter (level meter)

—Spectrum Analyzer (spectrum analyzer)— Vehicle Dynamics 1 (vehicle dynamics pro-

cessor 1)—Vehicle Dynamics 2 (vehicle dynamics processor 2)—Vehicle Dynamics 3 (vehicle dynamics processor 3)—Movie (movie screen)—Clock (entertainment clock) —OFF (entertainment display off)

# You can also switch between the entertainment display by pressing ENTERTAINMENT on the remote control. # When Standard is selected, source icon can be turned on or off by pressing DISPLAY.

4 Push MULTI-CONTROL up or down to select a desired text color.

Each time MULTI-CONTROL is pushed up or down, the text color changes. You can select the text color from among 11 colors.

# When Vehicle Dynamics 1, Vehicle Dynamics 2 or Vehicle Dynamics 3 is

selected, you can choose the color of gauge appearance from among five color combinations. # Texts are not displayed on Movie and OFF set- ting.

5 Press MULTI-CONTROL to determine the entertainment display and text color setting.

The choices you made on the color and the entertainment display are stored in memory and the display reverts.

Setting the background display

Some entertainment displays allow you to change the backgrounds. Try different backgrounds and colors (if available) until you find the desirable background display setting for the selected entertainment display.

1 Select an entertainment display whose background can be changed.

If the entertainment display you selected is available for the background setting, are displayed on the left and right side of

FRONT. Refer to Setting the entertainment dis- play on the previous page.

2 Push MULTI-CONTROL right to switch to the background display selection mode.

3 Turn MULTI-CONTROL to select a desired background.

Turn MULTI-CONTROL clockwise or counterclockwise to switch between the displays in the following order: BGV1 (background visual 1)—BGV2 (background visual 2)—BGV3 (background visual 3) —BGV4 (background visual 4)—BGV5 (back- ground visual 5)—BGP1 (background picture

1)—BGP2 (background picture 2)—BGP3 (background picture 3)—BGP4 (background picture 4)—BGP5 (background picture 5)— BGP6 (background picture 6)—BGP7 (background picture 7)—BGP8 (background picture

8)—Slideshow (slideshow)—Texture1 (texture 1)—Texture2 (texture 2)—Texture3 (tex- ture 3)—Texture4 (texture 4)—OFF (background display off)

and

Page 98

Section

Other Functions

# You cannot use ENTERTAINMENT on the re- mote control to switch between the background display.

4 When BGV1, BGV2 or Texture3 is selected, push MULTI-CONTROL up or down to select a desired color for the background.

Each time MULTI-CONTROL is pushed up or down, the background color changes. You can select the background color from among 11 colors (including rainbow mode).

! When the rainbow mode is selected, the

background color continuously changes through all the colors.

5 Press MULTI-CONTROL to determine the background display setting.

The choices you made on the color and the background display are stored in memory and the display reverts.

Rewriting the entertainment displays and the icons for telephone functions

You can rewrite the entertainment displays and the icons for telephone functions. Please create or download the data using your Computer, and record it on CD-R. For details, please visit the following site: http://www.pioneer.co.jp/car/pclink4/indexe.html

Important

Once the rewriting process has started, do not remove the front panel or turn the ignition off, until it is completed.

1 Press SOURCE and hold until the unit turns off.

2 Press and hold EQ and LIST until the unit goes into download mode.

Front panel is opened automatically and then Download and Insert disc is displayed.

# If a disc is loaded in the unit, it is ejected automatically. # When the front panel is open, does not go into download mode even if you press and hold EQ and LIST.

3 Insert the disc containing the rewritten data into the CD loading slot. Download Ready appears in the display, and

then data rewriting will start automatically. Now loading is displayed during rewriting.

CD loading slot

4 After Finished is displayed, press EJECT to eject the disc.

Download mode is exited and unit turns off.

Notes

! Do not insert anything other than a CD into

the CD loading slot.

! It can take several minutes to complete this

operation.

! During download mode, buttons other than

EJECT are inactive.

! To cancel download mode, press EJECT. ! If an error message such as CD ERROR is dis-

played, refer to Understanding error message on rewriting the entertainment displays on the

next page.

Page 99

Additional Information

Appendix

English

Understanding built-in CD player error messages

When you contact your dealer or your nearest Pioneer Service Center, be sure to record the error message.

Message Cause Action

ERROR-11, 12, 17, 30

ERROR-10, 11, 12, 15, 17, 30, A0

ERROR-15 The inserted disc

ERROR-23 The CD format

NO AUDIO The inserted disc

Track Skipped The inserted disc

PROTECT All the files on

Dirty disc Clean disc.

Scratched disc Replace disc.

Electrical or mechanical

does not contain any data

cannot be played back

does not contain any files that can be played back

contains WMA files that are protected by DRM

the inserted disc are secured by DRM

Turn the ignition ON and OFF, or switch to a different source, then back to the CD player.

Replace disc.

Understanding error message on rewriting the entertainment displays

When you contact your dealer or your nearest Pioneer Service Center, be sure to record the error message.

Message Cause Action

CD ERROR CD player error Press EJECTand

CD ERROR A0 Electrical error Turn the ignition

Disc ERROR The disc does not

Download ERROR, Transmit ERROR

FILE ERROR File error Rewrite the file.

contain the necessary data

Writing error Press EJECTand

check the disc.

ON and OFF. Press EJECTand

replace the disc.

retry the rewriting.

CD player and care

! Use only CDs that have either of the two

Compact Disc Digital Audio marks as shown below.

! Use only normal, round CDs. If you insert ir-

regular, non-round, shaped CDs they may jam in the CD player or not play properly.

Page 100

Appendix

Additional Information

! Check all CDs for cracks, scratches or

warping before playing. CDs that have cracks, scratches or are warped may not play properly. Do not use such discs.

! Avoid touching the recorded (non-printed)

surface when handling the disc.

! Store discs in their cases when not in use. ! Keep discs out of direct sunlight and do

not expose the discs to high temperatures.

! Do not attach labels, write on or apply che-

micals to the surface of the discs.

! To clean a CD, wipe the disc with a soft

cloth outward from the center.

! If the heater is used in cold weather, moist-

ure may form on components inside the CD player. Condensation may cause the CD player to malfunction. If you think that condensation is a problem turn off the CD player for an hour or so to allow it to dry out and wipe any damp discs with a soft cloth to remove the moisture.

! Road shocks may interrupt CD playback.

CD-R/CD-RW discs

! When CD-R/CD-RW discs are used, play-

back is possible only for discs which have been finalized.

! It may not be possible to play back CD-R/

CD-RW discs recorded on a music CD recorder or a personal computer because of disc characteristics, scratches or dirt on the disc, or dirt, condensation, etc., on the lens of this unit.

! Playback of discs recorded on a personal

computer may not be possible, depending on the application settings and the environ-

ment. Please record with the correct format. (For details, contact the manufacturer of the application.)

! Playback of CD-R/CD-RW discs may be-

come impossible in case of direct exposure to sunlight, high temperatures, or the storage conditions in the vehicle.

! Titles and other text information recorded

on a CD-R/CD-RW disc may not be displayed by this unit (in the case of audio data (CD-DA)).

! Read the precautions with CD-R/CD-RW

discs before using them.

Dual Discs

! Dual Discs are two-sided discs that have a

recordable CD for audio on one side and a recordable DVD for video on the other.

! Since the CD side of Dual Discs is not phy-

sically compatible with the general CD standard, it may not be possible to play the CD side with this unit.

! Frequent loading and ejecting of a Dual

Disc may result in scratches on the disc. Serious scratches can lead to playback problems on this unit. In some cases, a Dual Disc may become stuck in the disc loading slot and will not eject. To prevent this, we recommend you refrain from using Dual Disc with this unit.

! Please refer to the information from the

disc manufacturer for more detailed information about Dual Discs.

100

Pioneer DEHP-9800BT Operating Instruction

Specifications and Main Features

Frequently Asked Questions

User Manual