Pioneer CDJ-500, CDJ-500-S Service manual
COMPACT DISC PLAYER
CDJ-500S
THIS MANUAL IS APPLICABLE TO THE FOLLOWING MODEL(S) AND TYPE(S).
ORDER NO.
RRV2324
Model
CDJ-500S
NK O AC220V
¶ This service manual should be used together with the following manual(s):
Model No. Order No. Remarks
CDJ-500S/HY RRV1846
Power RequirementType
Remarks
PIONEER CORPORATION 4-1, Meguro 1-chome, Meguro-ku, Tokyo 153-8654, Japan
PIONEER ELECTRONICS SERVICE, INC. P.O. Box 1760, Long Beach, CA 90801-1760, U.S.A.
PIONEER EUROPE NV Haven 1087, Keetberglaan 1, 9120 Melsele, Belgium
PIONEER ELECTRONICS ASIACENTRE PTE. LTD. 253 Alexandra Road, #04-01, Singapore 159936
PIONEER CORPORATION 2000
T–ZZY JUNE 2000 Printed in Japan
CDJ-500S
1. CONTRAST OF MISCELLANEOUS PARTS
NOTES:
CONTRAST TABLE
CDJ-500S/NK and CDJ-500S/HY are constructed the same except for the following :
Ref. No.
P4 - 4 Operating Instructions DRB1214 Not used
P4 - 4 Operating Instructions (English) Not used DRB1292
P4 - 9 Packing Case DHG1785 DHG1784
Parts marked by "NSP" are generally unavailable because they are not in our Master Spare Parts List.
The mark found on some component parts indicates the importance of the safety factor of the part.
Therefore, when replacing, be sure to use parts of identical designation.
Screws adjacent to mark on product are used for disassembly.
Reference Nos. indicate the pages and Nos. in the service manual for the base model.
When ordering resistors, first convert resistance values into code form as shown in the following examples.
Ex.1 When there are 2 effective digits (any digit apart from 0), such as 560 ohm and 47k ohm (tolerance is shown by J=5%,
and K=10%).
560
47k
0.5
Ex.2 When there are 3 effective digits (such as in high precision metal film resistors).
Mark
1
5.62k RN1/4PC F562 x 10
Symbol and Description Remarks
PACKING
(English/ French/ German/ Italian/ Dutch/ Spanish)
56 x 10
47 x 103
R50
1R0
1
561
473
1
5621
CDJ-500S/
HY
RD1/4PU J
RD1/4PU J
RN2H K
R50
RS1P K
1R0
Part No.
CDJ-500S/
561
473
5621
NK
EXTERIOR SECTION
P7 - 9 NSP POWER SW BOARD ASSY DWS1287 DWS1286
P7 - 11 Cord Stopper CM-22B CM-22C
P7 - 20 Power Transformer (AC220- 230V/240V) DTT1146 Not used
P7 - 20 Power Transformer (AC110/120V/220- 230V/240V) Not used DTT1143
P7 - 21 AC Power Cord PDG1003 DDG1082
P7 - 37 NSP Rear Panel DNC1460 DNC1530
P7 - 105 NSP Caution Label VRW1297 Not used
P7 - 106 Caution Label VRW1094 Not used
1 : For PCB ASSEMBLIES, Refer to “CONTRAST OF PCB ASSEMBLIES” and “2. SCHEMATIC DIAGRAM”.
*
2 : The voltage selector switch is fixed to AC220-230V.
*
CONTRAST OF PCB ASSEMBLIES
POWER SW BOARD ASSY
H
F
DWS1286 and DWS1287 are constructed the same except for the following :
Mark Symbol and Description
NSP J5 (Board in jumper wire) Not used DB110NB2
NSP
1 : Refer to “2. SCHEMATIC DIAGRAM (2.1 POWER SW BOARD ASSY)”.
*
J6 (Board in jumper wire) Not used DB810NB2
S2 (Voltage selector sw) DSB1011 DSB1014
DWS1287 DWS1286
Part No.
1
*
1
*
1
*
1
*
2
*
Remarks
2
Loading...