Pinnacle LVR0804 User Manual

H.264

H.264 Standalone

Standalone

Standalone DVR

DVR

USER

USER MANUAL

MANUAL

MANUAL _V2.00

_V2.00

2

INDEX

Chapter

Chapter one

one

one Products

Products

Products Introduce

Introduce

Introduce .............................................................................

.............................................................................

............................................................................. 3

3

1.1 Technical Parameter ............................................................................................................................ 3

1.2 Performance ........................................................................................................................................ 4

Chapter

Chapter Two

Two

Two Hardware

Hardware

Hardware .............................................................................................

.............................................................................................

............................................................................................. 5

5

2.1 H.264 standalone 4CH/8CH/16CH DVR .......................................................................................... 5

Chapter

Chapter Three

Three

Three Operation

Operation

Operation ..........................................................................................

..........................................................................................

.......................................................................................... 8

8

3. １ Operation instruction .......................................................................................................................... 8

3.2 Powering On ...................................................................................................................................... 11

3.3 Shutdown ........................................................................................................................................... 12

3.4 Multi Channel .................................................................................................................................... 13

3.5 Preview ............................................................................................................................................... 13

3.6 Recording operation ......................................................................................................................... 13

3.7 Playback video .................................................................................................................................... 14

3.8 How to control PTZ ............................................................................................................................ 15

3.9 Alarm control ..................................................................................................................................... 17

3.10 Display Adjust .................................................................................................................................. 17

Chapter

Chapter Four

Four

Four Menu

Menu

Menu Operation

Operation

Operation Guide

Guide

Guide ......................................................................

......................................................................

...................................................................... 18

18

4.1 Recording Setup .................................................................................................................................. 18

4.2 Camera .................................................................................................................................................. 20

4.3 Network Setup ........................................................................................................................................ 22

4.4 System Setup .......................................................................................................................................... 25

4.5 System Management ............................................................................................................................. 29

Chapter

Chapter Five

Five

Five IE

IE

IE Preview

Preview

Preview ..............................................................................................

..............................................................................................

.............................................................................................. 31

31

5.1 logging on interface ........................................................................................................................... 31

5.2 System Settings ...................................................................................................................................... 33

5.3 State control ........................................................................................................................................... 35

Chapter

Chapter Six

Six

Six Instruction

Instruction

Instruction for

for

for mobile

mobile

mobile monitor

monitor

monitor ...............................................................

...............................................................

............................................................... 38

38

6.1. DVR Setup ........................................................................................................................................... 38

6.2. Mobile phone setup .............................................................................................................................. 38

Chapter

Chapter Seven

Seven

Seven FAQ

FAQ

FAQ (Frequently

(Frequently

(Frequently Asked

Asked

Asked Questions)

Questions)

Questions) .................................................

.................................................

................................................. 61

61

3



...

Power

This DVR select the adaptor is DC12V ; please make sure the power supply voltage before use the

machine.

If long time do not use the machine, please turn off the power of DVR machine , and let the electric plug

away from power socket;



...

safety

This DVR only for indoor use, as for prevent short circuit or electric danger, please do not let the DVR in the

raining or humid area.

In case any solid or liquid inside the case of DVR, please turn off the power immediately, and ask the qualified

technician check it before reboot the DVR;

The DVR is the precision machine, there is nothing for repair by customers themselves in it, when it break

down, please ask the qualified technician to check and repair, or contact with the agents of it.

�

...

Installation

Please keep the DVR in level for installation;

Pay attention to equipment ground;

For the first time to install the DVR, please make sure if the hard disk drive install or not;

Prevent to open the case and change the hard disk drive in electrified;

Propose to select the performance of hard disk drive will be 7200 rotating speed person second;

Please select the appropriate installation site , so let the air can be free flow inside the DVR, prevent the

machine overheating;

Please do not install the DVR nearby the radiator, air chute etc. heat source,

or where the direct sunlight, too much dust, or mechanical vibration or attack;

Chapter

Chapter one

one

one Products

Products

Products Introduce

Introduce

1.1

1.1 Technical

Technical

Technical Parameter

Parameter

Compression standard H.264 baseline profile@L3.1

Video iInput Composite 1.0Vp-p/75 Ω ,BNC × 4/ BNC × 8 / BNC × 16

Video output Composite 1.0Vp-p/75 Ω ,BNC × 1 , VGA × 1 Resolution Preview D1 7 04 × 576 （ PAL ）， 720 × 480 （ NTSC ）

CIF 352 × 288 （ PAL ）， 320 × 240 （ NTSC ）

Recording D1 7 04 × 576 （ PAL ）， 720 × 480 （ NTSC ）

CIF 352 × 288 （ PAL ）， 320 × 240 （ NTSC ）

Frate rate Preview/ recording

4ch 1 00 fps (PAL) , 120 fps (NTSC

8ch 200 fps (PAL) , 240 fps (NTSC)

16ch 400fps(PAL), 480fps(NTSC)

Audio input -8dB~22k,RCAx4(4 ch )

Audio output -8dB~92dB,RCAx1

Audio decode ADPCM

Alarm input Input low level alarm, user setting normal open or normal close, Varies

according to the model

Alarm output 1ch output or 2ch output; V aries according to the model

4

Recording mode Manual recording, timing recording , motion detection recording and external

alarm recording

Simplex/duplex/ triplex triplex ( recording, playback , LAN transmission)

LAN RJ45(10M/100M self-adapting )

PTZ control

Y

es

Communication RS485 × 1 ， USB2.0 × 2

USB USB mouse control Hard disk drive 1or2x SATA （ 2TB or above ）

Remote control unit

Y

es

Dimension Main board size : 220mm x112 mm

Power supply AC110-230V

1.2

1.2 Performance

Performance

Real-time

monitoring

Turn-by-turn analog video output and

VGA interface, according to TVmonitor or

VGA monitor to live view in 1/4 /8/9/16 or

more video channel tomonitoring the

recording streaming and the record file

capacity in E very hours every channel, to

presentation the status of video channel ,

recording, dynamic detection, video loss,

monitoring lock-up.

You

can view the

system log in local DVR.

Storage

function

Internal 1or2

SATA

interface, MAX

2TB hard disk drive, the file of hard

disk drive include cover mode

circulation recording and none cyclical

recording, the storage data to use the

propriet ar y format, can not falsify the

data, make sure the data safety.

Compression

format

Video compression format :: H.264

Support 8ch video and audio signal,

video

and audio maintaining stability in

synchronous.

Backup

function

Through USB interface to backup. ( for

example USB drive and mobile hard

disk drive etc.) The video file can be

downloaded by Client software

through LAN to laptop hard disk drive.

Recording

and

playback

function

* Multiplex, to achieve real time recording

to be independen t at the same time to

single channel playback, research and

backwards, network monitoring, network

search download etc.

* Multiple recording mode: Manual,

normal, alarm, linkage,dynamic detection

recording etc. turn-by-turn pre-recording

function.

* Can playback the record file in DVR

through network, to achieve quick-search

the recording file and recording type,

multiple playback type: SLOW, Fast

Forward, Backwards, step Forward.

Display the exact time of event occurred

while recording file playback.

Network

Operation

function

* through network to real time remote

monitoring;

* PTZ control

* recording research and real time

playback;

* system setting parameter modify and

the system software upgrade;

* remote monitoring alarm process and

view the system log message;

* to use embedded TCP/IP protocol and

Embedded Operation System, can

access the DVR through client software

program bundle in the package;

*Management Model: use enhancement

user management, password mode to

make sure the valid user to login the

system, flexible convenient and fast to

set the different permission user

requirement.

5

Alarm

linkage

function

8ch alarm input ( alarm event mode can

be

set normal open or normal close

selection),

and turn-by-turn video loss alarm,

dynamic

detection alarm, the alarm device may be

smoke detection censer, temperature

detector, IR detector.

Possess 4ch relay switch alarm output ,

flexible convenient and fast to achieve

alarm linkage and lighting control at site.

They ’ re possess protective circuit in

Alarm input and alarm output port, make

sure the device not to damaged.

Com-munication

port

* Possess specific interface, achieve

alarm input and PTZ control;

* possess a standard Ethernet interface,

achieve the network remote

monitoring.

PTZ

control

* Support PTZ decoder through RS485

communicate

* scalable multiple decoder protocol,

easy to achieve to control the pan

driver and speed dome camera

function.

Intelligent

operation

* mouse operation function;

* In menu for same setting and to

process shortcut copy operation

Chapter

Chapter Two

Two

Two Hardware

Hardware

2.1

2.1 H.264

H.264

H.264 standalone

standalone

standalone 4CH/8CH/16CH

4CH/8CH/16CH

4CH/8CH/16CH DVR

DVR

2.1.1

2.1.1 Hard

Hard

Hard disk

disk

disk Installation

Installation

F or the first use, please install the hard disk

○1Remove the screws on both ○2extracted from the next cover up ○3connect hard disk and mother board

sides of shell

6

○4fix the screw of hard disk ○5close cover ○6install the screws on both sides of shell

2.1.2

2.1.2 Rear

Rear

Rear panel

panel

4CH

Item

Item Interface

Interface

Interface Description

Description

1 VIDEO IN 4ch video input

2 AUDIO IN 4ch audio input

3 V-OUT 1ch video output

4 A-OUT 1ch audio output

5 VGA VGA monitor

6 NET RJ45 for internet

7 USB First USB for backup or upgrade system of DVR; Second

USB for mouse

8 ON/OFF Power supply switcher

9 DC-12V Power adaptor port

10

ALARM IN ： 1 2 3 4 alarm input port RS-485 ： A, B

ALARM OUT : N1 alarm output port, every channel connect GND 、 OUT 、 COM;

every two channel OUT , COM port is for GND;

8CH

Item

Item Interface

Interface

Interface Description

Description

1 VIDEO IN 8ch video input

2 AUDIO IN 8ch audio input

3 V-OUT 1ch video output

4 A-OUT 1ch audio output

5 VGA VGA monitor

6 NET RJ45

7 USB First USB for backup or upgrade system of DVR; Second

USB for mouse

8 ON/OFF Power supply switcher

9 DC-12V Power adaptor port

7

10

ALARM IN ： IN1-IN4 alarm input port RS-485 ： A , B

ALARM OUT: N1 alarm output port, every channel connect GND 、 OUT 、 COM;

every two channel OUT , COM port is for GND;

16CH

Item

Item Interface

Interface

Interface Description

Description

1 VIDEO IN 16ch video input

2 AUDIO IN 4ch audio input

3 V-OUT 1ch video output

4 A-OUT 1ch audio output

5 VGA VGA monitor

6 NET RJ45 for internet 7 USB/ MOUSE First USB for backup or upgrade system of DVR ； Second

USB for mouse

8 ON/OFF Power supply switcher

9 DC-12V Power adaptor port

10

ALARM IN ： 4CH alarm input port RS-485 ： A, B

ALARM OUT : N1 N2 for alarm output port, every channel

connect C and O; port is for GND;

2.1.3

2.1.3 Alarm

Alarm

Alarm input

input

input port

port

8 chanel alarm input, the mode of alarm input is no restriction (possible is normal open also normal close);

the GND alarm detector connect to COM under parallel connection (the power of alarm detector supply by

external power supply;

the ground terminal of alarm detector join-up in parallel with DVR;

the NC of alarm detector connect with the input end (alarm) of DVR;

when you want to reset the remote alarm of triggered , the +12V power supply of alarm detector supply by DVR,

for example, smoke detector.

When you select the external power supply, please share the GND with DVR;

Alarm

Alarm input

input

input circuit:

circuit:

8

Alarm

Alarm inlet

inlet

inlet connection:

connection:

2.1.4

2.1.4 Alarm

Alarm

output

output port

port

4 way switching

value alarm output,

selectable in normally open contact, also selectable in normally closed contact, the external alarm

device should be

need Vcc;

Chapter

Chapter Three

Three

Three Operation

Operation

3

3 .

.

. １

１

１ Operation

Operation

Operation instruction

instruction

3.1.1 Remote control AND Front panel keypad

9

Table

Table ：

S/

N

KEY pad

pad

Name

Operating

instruction

S/

N

Keypad

Name

Operating

instruction

1 【 POWER 】 Power ON/OFF

8

【 ENTER

】

【 OK 】

This button is used as “ enter ” and “ ok ” key in most circumstances

2 【 MENU 】 Access main menu

10

3 【 ESC 】

Exit operation or enter upper menu Close soft keyboard Close current window Exit from current control Return to last menu Exit from PTZ control under preview state

9 【 PTZ 】

Access/exit from PTZ control under preview state

4

【】

Slow playback,1/2 × , 1/4 × , 1/8 × and single frame play

10 【 +/- 】

Volume or number increase/reduction Select item of the list

5

【】

Fast playback, 2 × ,4 × and 8 × playback

1

【 ZOOM IN/OUT 】

Lens control

1 2 【 0~9 10+ 】

Digital input Corresponding; Channel is magnified in full screen under preview state

1 3

【 FN 】 Short cut

6

【】 Playback stop 1 4

【】

Switching of 1/4/8/9 /16 Preview mode

【】

Play / Pause

1 5

【 ALARM 】 Alarm reset

【 ▲ . ▼ . ⊳ . � 】

Four-way to move the focal point in main menu, up and down to move in the normal window, to control pan driver to move in the PTZ control windows

【 REC 】

To

mode of recording 1 6 【 CLEAR 】 Clear alarm

7 【 SEARCH 】

Search for playback time choosing

3.1.2 How to use mouse of DVR (for right hand mouse)

1 Left key single click

To

any function menu icon click the mouse left key into the menu

To

run the control point out operation

Change again select frame or motion detection piece mode

Click the assemble frame popping to pull down the list

In the input frame, can select digit, character, lowercase, block letter, left click

mouse on the keyboard of character input, that ’ s. ← say move back, ＿ say

blank ， Shift say s witch case .

11

2 Right click mouse

Right click mouse, popping the shortcut menu, as follows;

。

Through the menu can be switching preview screen window mode, start replays, PTZ control. Four pictures playback mode, the point of the right mouse button , Can in a single picture, four pictures, eight pictures (8 road playback), 16 screen (16 road playback), broadcast control switch view show

3

Double click left

button

To

run the ActiveX Control ActiveX special operation, For example, double click

the certain item of record listed file, then the system will playback the segment

record video.

4

Dragging the mouse

Depress the left key and dragging the mouse, banding select Motion detection

area, depress right key of mouse and Dragging, cancel the banding select area.

Dragging playback ProgressBar back and forth to dolly moves, to achieve the

playback position adjustment. Dragging the audio and video regulation

parameter bar dolly moves, to achieve the parameter adjustment.

3.2

3.2 Powering

Powering

Powering On

On

Boot-strap

If 【 POWER 】 pilot lamp off, please follow the operation step by step:

First step: if the power does not plug into, please plug into the power, then the DVR-4108 begin to start, by now,

if the DVR-4108 still inactive, to enter the next step;

Second step: turn on the power supply of the DVR-4108 at the back panel, DVR begins to start. If 【 POWER 】 pilot lamp to offer RED, press the 【 POWER 】 key, DVR-4108 begins to start.

The video output mode of DVR-4108 ’ s the default setting is multi picture channel mode after starting the

DVR-4108, if the time of start the DVR-4108 is in the Timing Recording Setting, the DVR-4108 will automatically to

start the Timing Recording function , the corresponding channel ’ s recording pilot lamp will be light, the DVR-4108 is

normal operation.

12

Button

Button Description

Description

Description Button

Button

Button Description

Description

Main Menu PTZ control

Wizard language Alarm control

Multi channel Display setup

Recording Control

Exit

Playbake Bake up

If before starting, the system not to install hard disk, into the system, will tip: system didn't detect any hard disk

connection!

3.

3. 3

3

3 Shutdown

Shutdown



 There

There

There are

are

are two

two

two safety

safety

safety mode

mode

mode for

for

for Shutdown

Shutdown

Enter 【 Exit 】 ,select 【 Power Down 】 .



 Abnormal

Abnormal

Abnormal shutdown

shutdown

Through

Through the

the

the rear

rear

rear panel

panel

panel to

to

to shutdown

shutdown

During the DVR-4108 running, directly to turn off the power through the rear panel power switch, please avoid as

much as possible to do it. (specially while the DVR recording) .

Directly

Directly to

to

to pull

pull

pull up

up

up the

the

the power

power

power cable

cable

cable of

of

of DVR-4108

DVR-4108

While the DVR-4108 running, directly to pull up the power cable of DVR-4108, please avoid as much as possible

13

to do it. (specially while the DVR recording) .

Caution: In some area, the power supply is irregularity, it will cause the DVR-4108 working not normal-operation,

the DVR-4108 will be damaged in serious. In this surroundings, suggest select the stabilized voltage supply.

3.4

3.4 Multi

Multi

Multi Channel

Channel

1/4/8/9/16 p review screen mode switch

3.5

3.5 Preview

Preview

After log in system of DVR, system will automatically directly enter the preview mode

In the preview picture, you can see the overprint date, time, channel name, if the date and time is not correct show on

the picture, re setting the date. There is a alarm input mode icon. (the meaning of every kind of icon as following

table)

Channel

Channel picture

picture

picture attention

attention

3.6

3.6 Recording

Recording

Recording operation

operation

Customer can according to select the different kind of recording mode in this system. For the

different kind of recording mode you set, the channel will be showed the mark on everyone channel.

Manual

Manual recording

recording

1

Channel is video when channel

video pictures showed this symbol

2

Channel happen when dynamic

test, channel video pictures

showed this symbol

3

Channel happen when channel

video cover alarm pictures

showed this symbol

4

Channel open sound , the channel

video pictures showed this symbol

14

Note:

Note: Manual

Manual

Manual recording

recording

recording operational

operational

operational requirement

requirement

requirement the

the

the user

user

user should

should

should have

have

have “

“

“ recording

recording

recording ”

”

” permission.

permission.

Please

Please make

make

make sure

sure

sure the

the

the hard

hard

hard disk

disk

disk drive

drive

drive has

has

has been

been

been installed

installed

installed and

and

and it

it

it has

has

has been

been

been formatted.

formatted.

1

1 ） Input

Input

Input manual

manual

manual recording

recording

recording operation

operation

operation menu

menu

Single click right key of mouse or In main menu=> recording control can into manual recording operation menu.

Under preview mode, press REC key or on the Remote controller unit key into recording control operation menu, as

follows:

2)

2) The

The

The explanation

explanation

explanation of

of

of manual

manual

manual recording

recording

recording operation

operation

operation menu

menu

【 manual recording 】 Priority level highest, no matter currently what status of every channel, after carry out the

manual press, corresponding channel will be record common in progress;

【 Auto recording 】 Setting channel recording by setting condition to record under Timing, Motion detection and

Alarm in Recording Setting;

【 Stop Recording 】 All video channel stop recording;

3.7

3.7 Playback

Playback

Playback video

video

Button

Button Description

Description

Description Button

Button

Button Description

Description

Synchronous / asynchronous play Voice adjustment

frame by frame

1/4/8/9/16 screen(switch

image)

15

S peed slow Hide / display list

S peed normal recording date

S peed fast P lay/pause/stop

Sound off/on rewind

Note:

1 ) During playback the Playback T ool will show the file playback speed, channel, timing, playback speed etc.

information in the Playback control panel ;

2 ) Can ’ t same time to select the Fast forward operation function in over 2 channel, only progress in anyone channel;

3) Can drag the Playback Speed toolbar by mouse;

3.8

3.8 How

How

How to

to

to control

control

control PTZ

PTZ

【 Zoom 】 Lens in the current play far closer picture, use the mouse wheel also can undertake variable times control.

【 Focus 】 Slight adjusting the focal length

【 Iris 】 Aperture size adjustment

【 Speed 】 Through the slider adjust rotation stepinterval, yuntai mainly used to control direction operation, the step

length of turning the faster yuntai.

【 Preset 】 Adjust the camera Angle, then direction and the corresponding input and clicking on [ set] button, preset

dots to set the dots in the preset rastelli.

Input presets dots and click on [ Transfer] button, the camera will be transferred to the preset point corresponding

position. Click[remove ] button, this presets dianjiang be cleared

16

【 Set 】 Click 【 Start

Tour

】 the trajectory of said no corresponding, click the 【 add Preset 】 and 【 delete Preset

point 】 , 【 Clear

Tour

】 the cruise lines.

【 Start T our 】 begin to track record, was registered date 【 end T our 】， thus set up from the corresponding track

circuit.

【 Left Limit 】 Began to limit scanning Settings, was registered date 【 right Limit 】 , thus set up corresponding limit

scanning.

【 Add Preset 】 Add presets point to the cruise lines.

【 Delete Preset 】 Cruise lines from deleting preset points.

【 Clear

Tour

】 Remove the cruise line designated.

Note

Note : some equipment doesn't fully support all function, depending on the specific yuntai equipment and different.

【 Control 】 PTZ Control

【

Tour

Scan 】 Point between cruise control.

【 Pattern Scan 】 Track p atrol control.

【 PTZ Reset 】 Remove all Settings, original reset to the original state.

【 Limit Scan 】 Yuntai boundary scan control around.

【 Auto Pan 】 Remove the cruise line designated

Note

Note : some equipment doesn't fully support all function, depending on the specific yuntai equipment and different.

17

3.9

3.9 Alarm

Alarm

Alarm control

control

【 Set Alarm 】 Selection need protection channel, click confirm corresponding channel after in protection status

【 Clear Alarm 】 Remove protection condition, not alarm input to react

【 Alarm Output 】 Open the corresponding alarm output

【 All 】 Can choose all the channels

3.10

3.10 Display

Display

Display Adjust

Adjust

(1)

Video

【 Video Effect 】 Optional: standard, downy, sharp, custom. 【 Default 】 Restoring default effect, for custom video effects, copy standard effect parameters.

Through the slider fluctuation sliding, respectively adjustable brightness, contrast and saturation, tonal, etc.

(2)Monitor

18

【 Device 】 Optional: VGA output, TV output etc display output device. 【 Default 】 Restoring default display parameters.

Through the slider fluctuation sliding, respectively adjustable brightness, contrast and saturation, tonal, etc.

(3)Setup

【 Device 】 Optional: VGA output, TV output etc display output devices, the system may support multiple equipment

and output.

【 Resolution 】 Setting the resolution of the display device.

Chapter

Chapter Four

Four

Four Menu

Menu

Menu Operation

Operation

Operation Guide

Guide

4

4 .

.

. 1

1

1 Recording

Recording

Recording Setup

Setup

(1)

(1) Recording

Recording

Recording Setup

Setup

【 Channel 】 Choose the need to install passage "whole" says setting all channels. 【 Image Size 】 CIF/ HALF D1/ D1 (only in whole function model) 【 Encoding Mode 】 Including fixed bitrate, dynamic bitrate.

19

【 Image Quality 】 Client-side image quality, the higher the quality the clearer. Choice scope: minimum, low, general,

high, high est

【 Frame Rate 】 Can click on the button manually input, 1 ~ 25 frames per second (PAL) or 1 ~ 30 frames per second

(NTSC) continuous adjustable. 【 Audio 】 Can select close, open according to requirements

【 Pre-Alarm Rec 】 Can select close, open according to requirements

(2)Secondary

(2)Secondary Stream

Stream

【 Channel 】 Choose the need to install passage "whole" says setting all channels. 【 Image Size 】 CIF/ HALF D1 /D1 (only in whole function model) 【 Image Quality 】 Client-side image quality, the higher the quality the clearer. 【 Frame Rate 】 Can click on the button to undertake choosing, optional: automatic, 1FPS, 2FPS, 3FPS, 4FPS, 5FPS.

(3)Information

(3)Information Overlay

Overlay

【 Channel 】 Choose the need to install passage "whole" says setting all channels.

【 Channel Name 】 Can manual corresponding input channel's name

【 Channel Display 】 Can choose according to the requirements of users don't use, the top-left corner, left, lower,

middle and downward, upper, right, and lower.

【 Time Display 】 Can choose according to the requirements of users don't use, the top-left corner, left, lower, middle

20

and downward, upper, right, and lower.

(4)Recording

(4)Recording Schedule

Schedule

【 Channel 】 Choose the need to install passage "whole" says setting all channels.

Each longitudinal row of every seven days a week, said the 24 hours a day manipulated said, mouse the left key

click on the small square footage, setting time to clean it has chosen right-click drag video time.

4

4 .

.

. 2

2

2 Camera

Camera

(1)

(1) PTZ

PTZ

PTZ Setup

Setup

【 Channel 】 Choose regional channels, yuntai Settings "whole" says setting all channels

21

【 PTZ Protocol 】 Yuntai equipment communication protocol

★ Note:

yuntai parameter Settings every channel need after completion in Settings of gc1318 alone.

【 PTZ Address 】 Yuntai equipment address, digital range 0 to 255.

★ Note:

here with the address must be consistent ball machine address, we can't control the ball machine.

【 Bit-rate 】 Yuntai equipment baud rate.

(2)Video

(2)Video Setup

Setup

【 Video Mode 】 Provide PAL and NTSC both formats video formats choice, modify after you must restart your system

can take effect.

【 Channel 】 Choose to set the video Settings area passage "whole" says setting all channels 【 Reserved Section 】 Click Settings enter. The white areas for privacy area 【 Buzzer Alarm 】 Happen when video lost choice whether or not to allow buzzer warning 【 Alarm Output 】 Happen when video lost upcoming linkage selected channel corresponding alarm output

(3)Motion

(3)Motion Detection

Detection

22

【 Channel 】 Choose need to set up mobile testing area passage "whole" says setting all channels

【 Sensitivity Setting 】 Can be set to give: minimum, low, general, high, high est

【 Detection Area 】 Click Settings enter.

Green area for dynamic test, grey areas design.ferroconcrete-brick undefended area for. Press the mouse left key to

drag on the lower detection area to the right, press the mouse button clearance. Detection area drag The save and

exit button can save Settings, some give up and quit button abandon modification.

【 Buzzer Alarm 】 Occur when dynamic test on the buzzer whether to allow the alarm

【 Trigger Recording 】 That will happen when dynamic test on the linkage of selected channel fast ball trigger video

【 Alarm Output 】 In this passage setting user can be copied to the other channels, fulfill the same dynamic detection

alarm Settings

4.3

4.3 Network

Network

Network Setup

Setup

(1)General

(1)General Setup

Setup

23

【 DHCP 】 After checked automatic assignment device will get IP address, subnet mask, the default gateway, the DNS

server, etc

【 UPnP 】 Can choose according to the requirement

【 IP Address 】 Network logic address can according to the requirements set

【 Subnet Mask 】 Server subnet mask

【 Default Gateway 】 Server gateway

【 DNS Server 】 DNS server addresses

【 Server Port 】 Data port, initial socket for 7777

【 HTTP Port 】 the default port for 80. If change, when using IE browser, need to monitor the IP address, adding new

socket. If use IP address to 82, from the original browsing http://192.168.1.110, change for http://192.168.1.110:82.

【 Handset Port 】 Network phones socket, initial socket for eight thousand eight hundred and eighty eight

(2)Dial-UP

(2)Dial-UP Setup

Setup

24

Tip

: PPPoE dial-up successful, according to 【 PPPoE IP 】 shown on IP address, users can remote access

hard disk video recorder. By nic LAN IP access.

(3)DDNS

(3)DDNS Setup

Setup

【 DDNS Service 】 Dynamic DNS provider website

【 DDNS Domain 】 Dynamic domain name, soft keyboard and hard keyboard can be input.

【 DDNS Account 】 Login domain name service provider website user name

【 DDNS Password 】 Login domain name service provider website password

Tip

: through the dynamic DNS server. Support dynamic DNS.

(4)Email

【 SSL Protocol 】 Sending E-mail in use safety network connection

【

Test

Email 】 Send an email to the recipient mailbox test

25

【 Email Address 】 The recipient's email address. Users can input two different email address.

【 Send Email 】 The sender email address .

【 SMTP Server 】 Send mailbox mail server

【 Email Account 】 The sender email address the corresponding account

【 Email Password 】 The sender email address of the corresponding email password

According to the customer request can be checked 【 inputl alarm 】 and 【 video loss 】 sending emails. Two can

also choose.

Note

Note : your sender email must support SMTP.

(5)Access

(5)Access Control

Control

【 List Rule 】 According to the requirement to choose: don't use, allow access, refused to visit.

【 Starting IP 】 Display IP address started section

【 Ending IP 】 Display IP address end segments

【 Add 】 On the basis of the need for added

【 Delete 】 According to the need to delete

4.4

4.4 System

System

System Setup

Setup

(1)Time

26

【 System Language 】 Used in a remote remote device control more hard disk video recorder occasions, only in

remote controls address and hard disk video recorder Numbers identical to remote operation.

【 Device Number 】 According to the requirement to select the time zones, has twenty six time zone for user Settings.

【 Time Zone 】 Select the format the date is displayed in including date, sun and moon June 21 years in three formats.

【 Date Mode 】

To

choose time display modes include 24-hour system and 12 hours to make

【 System Date 】 The current system date

【 System Time 】 The current system time

【 Daylight-saving mode 】 According to the requirement to choose

【 Set Time 】 Confirm modification system of time

(2)HDD

(2)HDD Management

Management

【 Disk Full 】 When video disk full system how to deal with, "said system will be automatic coverage the earliest video

files continue covering video," stop video "says system to stop the current video.

【 File Time 】 Says automatic generation video files interval, the set range 5-120 minutes.

27

【 Recording Bit-rate 】 Said the total rate of current coding

【 Recording Time 】 Said the storage devices systems installed in accordance with the current bitrate can store video

of time.

Display the current hard disk attributes: types, hard disk, usable capacity total capacity. Click [formatting ], all

storage file will be lost.

Tip

: to format the hard disk before please stop system current all those videos.

(3)User Management

【 User 】 Characters in length up to 8 bytes, ignore trailing Spaces. Can be letters, Numbers, and other symbols. The

user has the largest number of eight, user name may not be repeated.

【 User Rights 】 According to the requirements set of functions need checked

【 Add User 】 Input need to add user, and input the account password and passwords. According to save button to add

user.

【 Delete User 】 Select the users need to delete, and click on the "yes" button to remove users

【 Edit User 】 Choose need to modify user, and in user permissions bar needed under the function of check. According

to the save button modified users.

【 Edit Password 】 Select the account, input to modify current user password, and enter the account password and

confirmation password new. According to the save button for password changing. The password can be set to 0 ~ 8

bits

(4)Alarm Setup

28

【 Alarm Input 】 Choose corresponding alarm channel, "all" setup all channel said.

【 Input Type 】 Alarm input to often open/closed type choice (voltage output style)

【 Clear Alarm 】 Stop the current alarm video and alarm output, but not removal, can again trigger alarm.

【 PTZ Relate 】 When will the linkage happened alarm yuntai control

【 Trigger Recording 】 When will trigger happened alarm selected channel video.

【 Alarm Output 】 When will the linkage happened alarm corresponding alarm output

(5)Output Management

【 Buzzer Output 】 In the chosen time intervals have alarm input will start buzzer output.

【 Send Email 】 In the chosen time intervals have alarm input which will send relevant information, such as the alarm

events, paparazzi pictures, equipment name, device ID, etc sent to user specifies the mailbox.

【 Alarm Output 】 In the chosen time intervals have alarm input will start alarm output

29

4.5

4.5 System

System

System Management

Management

(1)System Upgrade

Show the system hardware versions, software version, release dates. Click [software upgrade 】 , the system

began to automatically detect and upgrade file.

Note

Note : equipment currently support upgrades: local USB mode, IE mode, the client software.

USB

USB mode

mode

mode : former ensure USB device to connect upgrade normal, as upgrade program has copy USB

devices in the root directory. According to the interface can upgrade operation hints.

Upgrade was successful, and the screen appears to restart operating hints. Equipment reboot after system that

will enable the new software.

(2)Log Search

30

【 Date Search 】 Can search according to date

【 Log Type 】 Optional: all, operation log, set diaries, alarm log, error log

Note

Note : according to the left, right arrow can move forward and content.

(3)Default

Restoring default can restore selected according to need. The system restore to the default configuration state

out, can according to the menu options choose to restore the corresponding Settings.

Tip

Tip : menu color, language, time date format, video format, IP address, the user account, etc will not be

restored.

31

(4)Exception Handling

【 Exception Type 】 Choose abnormalities: hard disk full, hard disk errors, network connection.

【 Buzzer 】 When abnormality, choose whether to allow the buzzer hints.

Chapter

Chapter Five

Five

Five IE

IE

IE Preview

Preview

5.1

5.1 logging

logging

logging on

on

on interface

interface

To input the IP address

32

Pretermission IP address is 192.168.1.110

33

5.2

5.2 System

System

System Settings

Settings

P oint , A s the picture ,You can set up language directory, A fter all to save you set.

34

35

5.3

5.3 S

S

S tate

tate

tate control

control

I n state control you can set reboot server, close server , remote to go up

R emote upgrade: let PC file load in the system

L og: to inquire sometime the server ’ s action

36

37

38

Chapter

Chapter Six

Six

Six Instruction

Instruction

Instruction for

for

for mobile

mobile

mobile monitor

monitor

Remark

Remark : only the mobile phone with Windows Mobile and Symbian operating system can

support the mobile phone monitor function.

6.

6. 1.

1.

1. DVR

DVR

DVR Setup

Setup

Please login MAIN MENU>>>>>NETWORK, setup MOBILE PORT:

6.

6. 2.

2.

2. Mobile

Mobile

Mobile phone

phone

phone setup

setup

6.

6. 2.1

2.1

2.1 Windows

Windows

Windows Mobile

Mobile

Mobile Operating

Operating

Operating system

system

1 ） Program download

Please copy the installation program whose name is amplayersetup.CAB from the

attached CD to your mobile phone, the default save path is My Documents.

39

2 ） Click the program and start to install it, just select default path when it ask you to select

install path.

3 ） Click install button to start to install.

4 ） After installed, click the Naway icon to run the program.

40

5 ） login the main interface as follow.

Channel

Channel : select the channel you want to monitor. When you select a channel, it will

connect to DVR automatically.

Connect

Connect : press it to connect to DVR.

Setup

Setup : Press it to enter into the interface to config the parameters for mobile phone

monitor.

Button

Button definition

definition

definition ：【 PTZ direction control （ left 、 right 、 up 、 down ）】 ; 【 area select （ zoom in 、 zoom out ）】 ; 【 focus

（＋、－）】 ; 【 aperture （＋、－）】 ; 【 snapshot 】 .

41

Remark: Please make sure the parameters for PTZ in DVR is correct.

Snapshot default save path is: Program>>>Naway>>>> photo

6 ） When you login for the first time, please setup the network parameters first, press setup

to enter into the interface, as follow:

User

User name

name

name : can be blank.

Password:

Password: should be the same as IE.

Sever

Sever : the public IP or dynamoic domain name of DVR.

Sever

Sever port

port

port : this port is the mobile port you setup in DVR.

Channel

Channel : setup the default channel you want to check.

Please press OK after you finished setup.

42

7 ） Display mode

Normal/Full screen

Remark: Click screen can switch the display mode between normal and full screen.

6.

6. 2.2

2.2

2.2 Symbian

Symbian

Symbian Operating

Operating

Operating system

system

1 ） Please copy the install program whose name is amplayersetup.CAB from the attached

CD to your mobile phone, the default save path is memory card. As follow:

2 ） Click the program to install it.

43

3 ）

You

can select the install path you want as the follow picture .

4 ） Please select continue when you got the follow window, and make sure your mobile

phone can access to internet.

44

5 ） you will got a message “ install finished ” after installed successful.

6 ） Please find the Naway icon in Application and run it.

45

7 ） when you login, you will find the window as follow:

Button

Button definition

definition

definition ：

CH1 CH2 PTZ ： up left zoom in + focus + aperture +

CH3 CH4 PTZ ： down right zoom out – focus – aperture –

【 Play/Pause 】【 Full screen/Normal 】【 Snapshot 】【 Setup 】【 Exit 】

Remark:

Remark: Snapshot default save path is: "C ： \Data\Images\ ”

8 ） When you login for the first time, please setup the network parameters first, press

【 Setup 】 to enter into the interface, as follow:

46

Net

Net Access

Access

Access point

point

point : Please select the network, GPRS/EDGE/3G

Sever

Sever address

address

address : the public IP or dynamic domain name of DVR.

Sever

Sever port

port

port : the sever port is the mobile port you setup in DVR.

User

User name

name

name : can be blank.

Password

Password : the same as IE.

Channel

Channel : setup the default channel you want to check.

Please press Apply after you finished setup.

9 ） Display mode

Normal/ Full screen

Remark: Click screen can switch the display mode between normal and full screen.

47

6.

6. 2.3

2.3

2.3 Android

Android

Android Operating

Operating

Operating system

system

1 Install the program

1. Copy the setup software P2PPlayer.apk to SD card.

2. Close USB, access to [Setting] — [Applications ] — [Application installer], and then the user

can find the setup file:

Clue: Do you want to install this application?

48

Press “ Install ” button.

49

If the installation is finished, the picture is as below:

50

2. System explanation

P2PPlayer phone port mainly contain: video surveillance, channel switch, full screen magnify,

PTZ control, focus, capture image, save as favorite and exit function.

2.1 System main interface

After the installation, press “ Naway ” icon in the application, see the below picture:

51

Open the main interface, see the below picture:

52

2.2 System setting interface

For the first time using or need to modify the parameters, press [Setting] button to access to the

parameters setting.

53

Favorite:

The record which is saved can be found here;

UserName

UserName :

The user name which is set on DVR [phone surveillance];

Password

Password :

The user password which is set on DVR [phone surveillance];

Server

Server :

The public IP address and dynamic domain name of DVR.

Port

Port :

The server port which is set on DVR [mobile phone].

ChannelCount:

Set the quantity of the channel.

Default

Default channel:

channel:

Set the default channel which will do the video surveillance.

RecordName:

Save the name of the record.

54

① After the setting press [Save] then it will go to the favorite folder. Next time you can find the

record in the file.

② After the setting press [setting] and back to the front interface.

After the setting, press “ connect ” button on the main interface and then it will connect the

server. In this interface it can also switch the channel, full screen magnify, PTZ control, focus,

phone capture and full screen display.

The detail information is as below:

： Press this icon to connect the server

: Press this icon to open the setting interface

: Switch the channel function.

： It can control the PTZ move up, down, left and right.

55

: It can operate the zoom, focus and iris.

： Press it to enter into full screen mode, press it again back to the common mode.

： Capture the image function.

3 Familiar questions and their answers

1 ： Why it can not connect the server?

a: Check the setting page layout, server, port, user name, password is right or not.

b: Check the internet; check if the mobile phone is connected with the internet.

2 ： After enter into the main interface, why the user can not control the PTZ?

a: Check if the channel has the PTZ.

b: The reflection of the PTZ is too slow, please wait for a moment.

6.

6. 2.4

2.4

2.4 Iphone

Iphone

Iphone Operating

Operating

Operating system

system

I. The installation of Aplayer

1. Open the icon “ ” , the below image will appear:

56

Image 1

2. Click

“

” ， Input “ naway ” in the searching bar, click

“

” the below image will appear:

57

Image 2

3. Then the image 3 will appear:

Image 3

4. After click the “ FREE ” on image 3, the image 4 will appear, click “ INSTALL ” option on image 4, and the image 5 will

58

appear. Input the password of Apple account on image 5, then click “ ok ” , image 6 will appear.

Image 4 image 5

Image 6

59

5 ． After change to on image 6, it means it is downloading

Aplayer software and set it automatically. After the process bar “ ” of is full, it means it

finishes the installation.

6 ． After finishing the installation, the interface of the mobile phone will appear Naway icon, like the image 7.

Image7

II. How to use APlayer

1. Click Aplayer icon, open the software. The introduction of the interface function is as

below:

60

① PTZ direction key (up, down, left and right)

② PTZ lens control (magnify+, reduce-),(focus+, focus-), (iris+, iris-)

③ Choose the monitor channel

④ The function of the key from left to right: Pause, capture, full screen mode,

next monitor option, monitor connection setting.

⑤ Exit, the middle key of the phone

2. Set the monitor point: it is the same setting with Symbian and Windows.

61

① IP address of the monitor point

② Network port

③ User name

④ Password

Chapter

Chapter S

S

S even

even

even FAQ

FAQ

FAQ (Frequently

(Frequently

(Frequently Asked

Asked

Asked Questions)

Questions)

01 ： Why the DVR did not run after connect the power supply?

① Please check the power switch turn on or off at the rear panel of DVR.

② Please check if the turn on DVR operation correct or not?

③ If you select the adaptor +12V, 5A or above? (8ch 5A, 16ch 220V 200W)

02 ： Still stop over on the boot-strap frame?

Physical damaged in hard disk drive

Boot manager abnormal.

03 ： Why does appear the boot running too slow?

① There are too much capacity data in hard disk drive, the system will automatic search the data when

the system boot up, caused the boot running slow.

② The hard disk drive error will cause the system research the data repeatedly, caused the boot

running slow.

62

04 ： Why does the system reboot repeatedly?

① Check the hard disk drive, if there is not the FAT32 formatted in it or the problem in it and caused the

DVR reboot;

② Please check the power supply of DVR, if you installed a lot of hard disk drive, it may be reboot

repeatedly underpower;

③ Please pull up the network cable, then to check the DVR can work normally or not, being the

catastrophe failure in network ,

it will cause the DVR reboot repeatedly ;

05 ： Why does the system halted of DVR during the playback and search the video file information in progress?

Please check if you install the hard disk drive or if the drive is ok or not? Please replace the good one

for it soon;

If the ambient temperature on the high side or not?

Is there any heaven current installation surrounding and external video device, heavy current surging

video cable, caused the DVR can not work properly and the system halted;

06 ： Firmware upgrade failure?

U drive is not good compatible with the DVR, cause the DVR can not detected it, suggested to try one

or two more different kind of U drive in the market;

USB interface is not good;

The voltage hunting fearfulness during the system firmware upgrade in progress;

07 ： Why the display color is black and white in TV and VGA monitor?

Check the video system is it matching the video input, DVR, TV or VGA monitor, if there is not on all

fours, please set the video system mode in auto automatic recognition;

08 ： Why does nothing display on the TV or VGA monitor?

① please make sure if the power supply of TV or VGA monitor turn on or not; if the illumination located

in the lowest status?

② if the video connected with TV or VGA monitor properly? Check if there is any video signal input?

And make sure the line faulty or not?

09 ： Why does the video like water wave, to appear obstruction distortion?

① if there is short circuit, open circuit or insufficient solder and connection failure of video cable?

② If the video cable obstruction by high voltage interference, please separate the video and high

voltage in linkup cabling, at the meantime, please select the better quality, shield video cable for the project;

③ In the whole system, only select the central point to grounding , please do not multi port to grounding,

then, cause the common mode obstruction, please connect the screw in DVR rear panel to grounding;

④ Check if there is the become old problem in the camera or TV monitor and cable?

10 ： Why do the color of live video and record video data distortion?

① Make sure the input and output video parameter of main menu setting correct;

② Make sure the connection is correct;

11

： Why does the video skew became deformed, color cast?

① Make sure the VGA cable and DVR be connected with grounding properly;

② The DVR working atmosphere temperature high, or no good in radiating, cause the VGA chipset

working exceptional, or the mention circuit parameter is abnormal;

12 ： Why does the record video playback in mosaic under local DVR?

63

① The recording parameter setting is too low cause the record video quality overall down, sometime

appears to mosaic;

② The record video file locates where there is a bad sector in a hard disk drive, it will cause the mosaic

raising;

Postscript

Product

Product parameter

parameter

parameter Table

Table

4CH

4CH 8CH

8CH

8CH 16CH

16CH

Compress

standard

H.264 baseline profile@L3.1

Video

Video in

in

in BNC （ 1.0Vp-p/75 Ω ） BNC （ 1.0Vp-p/75 Ω ） BNC （ 1.0Vp-p/75 Ω ）

Video

Video out

out

out 1TV BNC （ 1.0Vp-p/75 Ω ） / 1 VGA 1TV BNC （ 1.0Vp-p/75 Ω ） / 1 VGA 1TV BNC （ 1.0Vp-p/75 Ω ） / 1 VGA

P

P icture

icture

icture standard

standard

standard PAL ( 7 04 × 576 ) ， NTSC (720 × 480 ) P AL ( 7 04 × 576 ) ， NTSC (720 × 480 ) P AL ( 7 04 × 576 ) ， NTSC (720 × 480 )

resoluti

resoluti o

o

o n

n

n ratio

ratio

1024x768/800x

600

1024x768/800x

600

1280*1024 1024x768

R

R ecord

ecord

ecord encoded

encoded

encoded D1/HD1/CIF D1/HD1/CIF D1/HD1/CIF

R

R ecord

ecord

ecord play

play

play 4ch 8ch 8ch/16ch

Roll

Roll rate

rate

rate PAL:1~25P/S ； NTSC:1~30P/S PAL:1~25P/S ； NTSC:1~30P/S PAL:1~25P/S ； NTSC:1~30P/S

Audio

Audio in

in

in RCA × 4 RCA × 4 RCA × 4

Audio

Audio out

out

out BNC × 1 BNC × 1 RCA × 1

Audio

Audio encoded

encoded

encoded ADPCM ADPCM ADPCM

Audio

Audio encoded

encoded

rate

32Kbps 32Kbps 32Kbps

Alarm

Alarm In

In

In 4E 4E 4E

Alarm

Alarm Out

Out

Out 1ch 1ch 1ch

R

R ecord

ecord

ecord mode

mode

Manual record ， motionrecord and

externa alarm record

Manual record ， motionrecord and

externa alarm record

Manual record ， motionrecord and

externa alarm record

Mult

Mult mode

mode

mode R ecord ， Play ， Internet R ecord ， Play ， Internet R ecord ， Play ， Internet

64

Hd

Hd interface

interface

N o N o HDMI: 1080P(1920*1080)

Network

interface

RJ45 (10M/100M) RJ45 (10M/100M) RJ45 (10M/100M/1000M)

M

M obil

obil

obil platform

platform

platform Naway.CAB ； symbian v3 ； symbian v5 ； Naway-Android ； iphone ， Blackberry

RS485

RS485 PTZ control PTZ control PTZ control

Communication

port

RS485 × 1 ， USB2.0 × 2 RS485 × 1 ， USB2.0 × 2 RS485 × 1/2 ， USB2.0 × 2

H

H ard

ard

ard D

D

D isc

isc

isc SATA × 1/2 （ maximum 2T ） SATA × 1\2 （ maximum 2T ） 2/4/8SAT A （ maximum 2T ）

USB

USB interface

interface

U sb mouse ， Usb disc backup 、 usb

mobile hard disk

U sb mouse ， Usb disc backup 、 usb

mobile hard disk

U sb mouse ， Usb disc backup 、 usb

mobile hard disk

R

R emote

emote

emote control

control

Y

es

Y

es

Y

es

P

P ower

ower

ower adapter

adapter

12V/3A DC

（ according to the sum of

DISK ）

12V/3A DC

（ according to the sum of

DISK ）

12V/5A /6ADC

（ according to the sum of

DISK ）

W

W orking

orking

temperature

0 ℃ ～ +60 ℃ 0 ℃ ～ +60 ℃ 0 ℃ ～ +60 ℃

W

W orking

orking

humidity

10% ～ 90% 10% ～ 90% 10% ～ 90%

P

P roduct

roduct

roduct size

size

（ mm

mm

mm ）

330x250x50mm

（ according to the sum of

DISK ）

330x250x50mm

（ according to the sum of

DISK ）

380x300x55mm

（ according to the sum of

DISK ）

P

P roduct

roduct

roduct weight

weight

（ Kg

Kg

Kg ）

2.6 （ without disc ） 2.6 （ without disc ） 3.0 （ without disc ）

A ttention ： Parameters vary depending on the model

65

PRODUCT WARRANTY CARD

A

ll the products sold are covered by 12months warranty from the date of

invoice.

W arranty instructions ：

1. Please contact us when the product is caused by its own fault within 1year

warranty.

2. Please mail us your written warranty card as soon as possible after purchas ing

our products so that we can repair or replace this product to its original operation

condition. O r the company will not deal with it.

3. Please write the truth on the warranty card.

4. P aid for repairing as follows:

A: Equipment failure caused by human operation

B : Equipment failure caused by not conforming to the using environment

C : No warranty card

D: W arranty expired

P roduct model Product serial number

Purchasing time U ser name Contact person

Telephone

Note ：

Please

Please keep

keep

keep the

the

the warranty

warranty

warranty card

card

card for

for

for the

the

the better

better

better service.

service.

66

Pinnacle LVR0804 User Manual

Specifications and Main Features

Frequently Asked Questions

User Manual