
HD-ATSC
Descriptions
u Simple user interface
u On screeen guide set-up
u Electronic program guide
u Unmatched channel mapping
options
u A
TSC compliant demodulation and
FEC decoding in 8VSB modes
u W
ide range equalizer eliminates
multipath effects
u Auto scan of programmed channels
Rev. 03/07
ATSC/8VSB High Definition Set-Top Box
6260 Sequence Drive, San Diego, CA 92121
Ph: 858-546-5050 Fax: 858-546-5051
The HD-ATSC is Pico Macom’s state-of-the-art 8VSB/HD digital decoder.
The
HD-ATSC will take a high or standard definition 8VSB digital signal and
convert to analog video and audio output. The unit features three separate
outputs: (1) analog video and audio output for compatibility with non-HD television and (2,3) component and HDMI output for viewing in full high definition
television. The HD-A
TSC
featur
es a user
-friendly set-up guide that allows for
easy channel mapping and installation. The unit is also equipped with ATSC
compliant forwar
d error correction (FEC) decoding tools that enables the
r
eception of digital terr
estrial signals in weak signal conditions.
ATSC/8VSB High Definition Set-Top Box
HD-ATSC
HD-ATSC_fab07.qxd 4/16/07 2:51 PM Page 1

HD-ATSC
Specifications
Re
v
.
03/07
6260 Sequence Drive, San Diego, CA 92121
Ph: 858-546-5050 Fax: 858-546-5051
ATSC/8VSB High Definition Set-Top Box
Input frequency range: 54-860MHz
Channels: 2-13 (VHF) 14-69 (UHF)
Input channel bandwidth: 6 MHz
Input level range: -7dBm to -80dBm
Noise figure: <8dB
Adjacent channel rejection: 60dB
Image rejection: 40dB
Demodulation mode: 8VSB MP@ HL, 8VSB MP @ ML
Symbol clock frequency : 10.762 MHz
Video output (analog):
Frequency response: 30Hz to 4.2 MHz, ±1.5dB
Video output level: 1Vp-p ± 0.2V
Impedance: 75 ohms
Connector type: RCA
Y , Pb, Pr outputs:
Impedance:
75 ohms
Connectors: RCA
Y-output: 1Vp-p ± 0.2Vp-p
Pb-output: 0.7Vp-p ± 0.1V
Pr-output: 0.7Vp-p ± 0.1V
Audio L/R outputs:
Impedance:
600 ohms
Level: 3.5Vp-p ±0.5
Frequency response: 20Hz to 20k ±2dB
Distortion: 1% max.
HDMI output: Industry standard compliant
Digital optical output: Industry standard compliant
@ 2.5Vp-p
Power consumption: 90 to 240Vac, 50-60 H, 15 W
Dimensions: 11˝W x 6˝D x 1.5˝H
RF
General
Ordering Information
HD-A
TSC
HD-ATSC_fab07.qxd 4/16/07 2:51 PM Page 2