Installation and
Operation Manual
CDA Series
5-1000MHz Distribution Amplifiers
Operation
Manual
Rev. 04/05
Ph:800-421-6511
www.picomacom.com
CDA Series Manual.qxd 4/15/05 3:00 PM Page 1
CDA Series
2
Rev. 04/05
Ph:800-421-6511
www
.picomacom.com
Specifications/Warranty
Limited Warranty
Pico Macom warrants to the original purchaser that all of its new products are of sound design, quality materials and workmanship at the time of manufacture
and will be free from related defects for one year from the original purchase date. Pico Macom will repair or
, at its discretion, replace without cost to the original
purchaser, the product which, upon inspection by Pico Macom, appears to be defective or not conforming to factory specifications. Pico Macom will cover the cost
of parts, labor
, and return freight from factory
.
Warranty Limitations
This warranty excludes coverage of damage or inoperability resulting from (1) use or installation other than in strict accordance with Pico Macom’
s written instruc
tions, (2) disassembly or repair by someone other than Pico Macom or a Pico Macom authorized repair center, (3) misuse, misapplication or abuse, (4) alteration,
(5) lack of reasonable care or (6) wind, ice, snow
, rain, lightning, power surges, or any other weather conditions or acts of God. Pico Macom’
s warranty with respect
to third-party proprietary sub-assembly modules and/or private-label products are limited to the duration and terms of third-party vendors’ warranty. Pico Macom
shall in no event and under no circumstances be liable or responsible for any consequential, indirect, incidental, punitive, direct or special damages based upon
breach of warranty, breach of contract, negligence, strict tort liability or otherwise or any other legal theory, arising directly or indirectly from the sale, use, installation
or failure of any product acquired by buyer from Pico Macom. This limited warranty extends to the original purchaser. Pico Macom reserves the right to modify or
discontinue this warranty at Pico Macom’s sole discretion without notification. No other warrantees are expressed or implied.
Our Return Policy: Your Satisfaction Guaranteed
Our goal is your complete satisfaction. If for any reason, our products were not quite what you anticipated, simply call your customer service rep and we will be
happy to assist you in replacing or returning the order. You may return current, non-discontinued items for full credit for up to 30 days from invoice date. Our requirements are simple: Excepting defective items, the products must be returned in their original packaging and in re-salable condition. Restocking fees may otherwise
apply beyond this period or if products are not returned in their original condition. Please contact your customer service rep for more information.
Installation
1. RF IN: Connect input from cable to this port.
2. 12VDC 300mA: Connect coax cable from wall adaptor power supply.
3. RF OUT / Power In: Connect this port (these ports) to distribution
system. This port accepts 12 VDC @ 300mA line power.
4. LED: LED is lit when power is supplied to amplifier
Specifications
Frequency Range:
Forward Path 54-1000 MHz
Return Path 5-42 MHz
Gain:
Forward Path
CDA-1A & 1P 15 dB min.
CDA-2A & 2P 11 dB min.
CDA-4A & 4P 8 dB min.
Reverse Path
CDA-1A 9 dB min.
CDA-2A 7.5 dB min.
CDA-4A 4.5 dB min.
Insertion Loss:
Return Path
CDA-1P -2 dB max..
CDA-2P -5 dB max.
CDA-4P -8 dB max.
Input / Output Return Loss: -17 db min.
Isolation:
Return path in to in -17 dB min.
Forward path out to out -17 dB min
Hum Modulation: -75 dBc
Composite second order: -62 dBc
Composite triple beat: -74 dBc
Cross modulation: -75 dBc
Surge Protection (all ports): 6 KV
Power Supply Voltage: 12 Vdc @ 300mA
CDA Series Manual.qxd 4/15/05 3:01 PM Page 2
Loading...