PhotoCentriC BR3D-DL-HARD-LSR SPECS

Technical Data

BR3D-DL-HARD-LSR

UV Laser Hard
Hard 3D polymers

SPECS

FEATURES

Photocentric’s range of hard Laser UV photopolymers are
ideal for making objects where you want a very hard object.
Objects cannot be bent or compressed.They exhibit very high
tensile shear properties and very low elongation. Laser UV Hard
provides excellent imaging in your desktop laser printer.You
will experience the benets of fast exposure times and a wide
exposure latitude, allowing you to hold the nest details your
machine can provide. The solid material is tough, durable and
long lasting provided it is stored in dry conditions away from
strong UV light.

PROCESSING INSTRUCTIONS

Follow the procedures laid out in your 3D Laser printer´s user
manual. Polymer should be poured into the tray away from
direct sunlight. Polymer can be reused but should be poured
through a lter to remove solid lumps. Keep hood on at all times.
Liquid polymer is soluble in water and soap. After cleaning,
objects surface tack can be removed by leaving under water
in UV for 20 minutes or longer. If any surface tack persists you
can remove it by wiping the parts with IPA.

DATA

Viscosity 230 cPs

(At 25ºC Brookeld spindle 3)

Hardness 77 Shore D

(After post exposure)

Tensile strength 35 MPa

ASTM D638 (After post exposure)

Tensile strength 15 MPa

ASTM D638 (Before post exposure)

Tensile modulus 2060 MPa

ASTM D638 (After post exposure)

Elongation at break 4%

ASTM D638

Heat deection temp 60°C

ASTM D648

Storage 10<t>50°C

Density 1.19 g/cm

AVAILABLE COLOURS

Black, Clear, Grey, White

Other colours available on request

Available in 1kg bottles with non-drip cap.

3

Photocentric Ltd. Cambridge House, Oxney House Peterborough PE1 5YW UK email: [e-mail]

Photocentric Inc. 2205 West Parkside Lane, Phoenix, 85027, AZ USA email [e-mail]

Winner of Queen’s Award for Enterprise: Innovation 2016 www.photocentricgroup.com