Phonic XP V510 Service Manual
XP-V510
Y
XP-V511
XP-V512
XP-V513
XP-V514
AEZ
AEZ, AHK
AEZ, AK
AHC, AHR
SERVICE MANUAL
COMPACT DISC PLAYER BASIC CD MECHANISM : DA23L
MODEL TYPE
XP-V510
XP-V511
XP-V512
XP-V513
XP-V514
• This Service Manual is the "Revision Publishing" and replaces "Simple Manual"
XP-V510(Y), XP-V511(AEZ), XP-V512(AEZ,AHK), XP-V513(AEZ,AK) and
XP-V514(AHC,AHR), (S/M Code No. 09-003-423-6T3).
Y1SF
AEZ1SF, AEZ1GF
AEZ1SF, AEZ1GF, AHKJ1LLF, AHKJ1SF
AEZ1VF, AK1VF
AHC1SF, AHR1GF, AHR1SF
S/M Code No. 09-003-423-6R2
REVISION
DATA
SPECIFICATIONS <510Y, 511AEZ, 512AEZ, 513AEZ, 513AK>
Tracking system: 3-beam laser
Laser pickup: Semiconductor laser
D/A conversion: 4-times oversampling digital filter + 1-bit DAC
Frequency response: 20 - 20,000 Hz
Output: PHONES / LINE OUT jack (stereo mini-jack)
Maximum output: 10 mW + 10 mW (EIAJ 16 ohms at 1 kHz)
Power supply: DC 3 V using two LR6 (size AA) alkaline
Dimensions: 127.9 (W) x 28.4 (H) x 130.6 (D) mm
Weight: Approx. 202.3 g (7.1 oz.) excluding batteries
AC adaptor AC-D603: Rated voltage
<Except 510Y> AC 230 V, 50 Hz
• Design and specifications are subject to change without
notice.
500 mV (47 kohms at 1 kHz)
batteries
DC 2.4 V using two commercially available
(Ni-Cd 1.2 V 700 mAh) rechargeable batteries
<510Y, 511AEZ>
DC 2.4 V using two supplied
(Ni-Cd 1.2 V 700 mAh) rechargeable batteries
<512AEZ, 513AEZ, 513AK>
AC house current using the supplied AC
adaptor<Except 510Y>
AC house current using an optional AC adaptor
<510Y only>
(5 1/8 x 1 1/8 x 5 1/4 in.)
SPECIFICATIONS <512AHK, 514AHC, 514AHR>
Tracking system: 3-beam laser
Laser pickup: Semiconductor laser
D/A conversion: 4-times oversampling digital filter + 1-bit DAC
Frequency response: 20 - 20,000 Hz
Output: PHONES / LINE OUT jack (stereo mini-jack)
Maximum output: 12 mW + 12 mW (EIAJ 16 ohms at 1 kHz)
Power supply: DC 3 V using two LR6 (size AA) alkaline
Dimensions: 127.9 (W) x 28.4 (H) x 130.6 (D) mm
Weight: Approx. 202.3 g (7.1 oz.) excluding batteries
AC adaptor AC-D603: Rated voltage
• Design and specifications are subject to change without
notice.
500 mV (47 kohms at 1 kHz)
batteries
DC 2.4 V using two supplied
(Ni-Cd 1.2V 700mAh) rechargeable batteries
<512AHK, 514AHC>
DC 2.4 V using two commercially available
(Ni-Cd 1.2 V 700 mAh) rechargeable batteries
<514AHR>
AC house current using the supplied AC adaptor
(5 1/8 x 1 1/8 x 5 1/4 in.)
230 V AC, 50 Hz<512AHK>
115 / 230 V AC, switchable, 50 / 60 Hz <514AHR>
220 V AC, 50 Hz<514AHC>
–2–
PROTECTION OF EYES FROM LASER BEAM DURING SERVICING
PICK UP ASSY
: SOLDER
910 15161
This set employs laser. Therefore, be sure to follow carefully the
instructions below when servicing.
WARNING!
WHEN SERVICING, DO NOT APPROACH THE LASER EXIT
WITH THE EYE TOO CLOSELY. IN CASE IT IS NECESSARY TO
CONFIRM LASER BEAM EMISSION. BE SURE TO OBSERVE
FROM A DISTANCE OF MORE THAN 30cm FROM THE
SURFACE OF THE OBJECTIVE LENS ON THE OPTICAL
PICK-UP BLOCK.
Caution: Invisible laser radiation when
open and interlocks defeated avoid exposure to beam.
Advarsel:Usynling laserståling ved åbning,
når sikkerhedsafbrydere er ude af funktion.
Undgå udsættelse for stråling.
VAROITUS!
Laiteen Käyttäminen muulla kuin tässä käyttöohjeessa mainitulla tavalla saattaa altistaa käyt-täjän turvallisuusluokan 1 ylittävälle näkymättömälle lasersäteilylle.
VARNING!
Om apparaten används på annat sätt än vad som specificeras i
denna bruksanvising, kan användaren utsättas för osynling
laserstrålning, som överskrider gränsen för laserklass 1.
CAUTION
Use of controls or adjustments or performance of procedures
other than those specified herein may result in hazardous
radiation exposure.
ATTENTION
L'utilisation de commandes, réglages ou procédures autres que
ceux spécifiés peut entraîner une dangereuse exposition aux
radiations.
ADVARSEL!
Usynlig laserståling ved åbning, når sikkerhedsafbrydereer ude
af funktion. Undgå udsættelse for stråling.
This Compact Disc player is classified as a CLASS 1 LASER
product.
The CLASS 1 LASER PRODUCT label is located on the rear
exterior.
CLASS 1
KLASSE 1
LUOKAN 1
KLASS 1
LASER PRODUCT
LASER PRODUKT
LASER LAITE
LASER APPARAT
Precaution to replace Optical block
(SF-P200)
Body or clothes electrostatic potential could ruin
laser diode in the optical block. Be sure ground
body and workbench, and use care the clothes
do not touch the diode.
1) After the connection, remove solder shown in
the right figure.
–3–
Loading...