Phonic WM400-L, WM400D-L, WM400-R, WM400D-R User Manual
WM400-L / WM400D-L
WM400-R / WM400D-R
Wireless Receivers
English
User’s Manual
2
WM 400-R / 400D-R / 400-L / 400D-L
3
WM 400-R / 400D-R / 400-L / 400D-L
INTRODUCTION........................................................................................................................................4
FEATURES...................................................................................................................................................4
PRODUCT DESCRIPTION......................................................................................................................5
WM-400(D) POWER MODES.................................................................................................................7
THE WM400D’S DIGITAL FEATURES.................................................................................................8
ATTACHING THE UNIT TO A SPEAKER.............................................................................................9
DIMENSIONS............................................................................................................................................10
SPECIFICATIONS....................................................................................................................................11
EQ PRESETS............................................................................................................................................12
WM400-L/WM400D-L
WM400-R/WM400D-R
Wireless Receivers
CONTENTS
Phonic reserves the right to improve or alter any information suppied within this document without prior notice.
V1.1 AUG 08, 2006
4
WM 400-R / 400D-R / 400-L / 400D-L
INTRODUCTION
Congratulations on your purchase of the
WM400(D) wireless receiver, to be used
in conjunction with the WM60 or WM70
wireless transmitters. With either the stereo
or mono WM kits, you are now fast on your
way to becoming completely wireless in your
audio set up. The WM modules are not only
fantastic in style and convenience, however;
they are incredibly easy to use, as this
manual will no doubt prove.
Please have a thorough read of this user’s
manual before operating the WM modules.
Inside this guide you will nd information on
the ease of your wireless set up, as well as
some great troubleshooting tips and a com-
plete run-down on your modules’ features.
After reading, place the manual in an easy to
remember place so that you can come back
to it in future if ever necessary.
FEATURES
● Working with the WM60 or WM70 trans-
mitter to form a wireless system for sav-
ing the audio cables between your mixer
and active speakers
● Stand-alone UHF wireless receiver,
compatible with WM60 and WM70 trans-
mitters
●
12VDC external power supply (country
dependent)
● 16 user-selectable frequencies
● RF carrier frequency range:
614.175 - 804.800 MHz (FCC)
614.175 - 864.800 MHz (CE)
●
Operating range: 210 ft. (70m, environ
-
ment dependent)
● Indicators for power on, AF and RF
● Antenna: external, threaded connector
● Audio output connectors: XLR out
● M6, M8, M10 screws and Velcro strip
included for attaching WM400(D) to any
speakers
WM400D-L or WM400D-R plus:
●
300 ms digital delay processor for com
-
pensation of different distance speakers
●
0.1 millisecond to 300.0 millisecond de
-
lay range, delay adjustment may be
made with 0.1 millisecond precision
●
30 preset EQ curves and variable high
cut and low cut lters
● 4-digit display to indicate frequency
channel and delay, plus AF, RF and de-
lay bypass indicators
5
WM 400-R / 400D-R / 400-L / 400D-L
PRODUCT DESCRIPTION
These wireless receivers can be used in conjunction with any active speaker. The receiver
can be attached to the speaker by screwing it
into the stand’s screw socket.
1. 4 Digit Display
(WM400D-L and WM400D-R only)
This display will allow users to see the
properties that are currently in use by
the WM400D, whether you are adjusting
the receiver channel (indicated by CH),
the EQ settings (indicated by EQ), the
delay time (indicated by only the delay
time in milliseconds) or the high and
low pass lters (indicated by a H or L,
respectively). When this unit is powered,
the 4 digit display will light up.
2. AF Indicators
When this LED is illuminated, it indicates
that there is an audio signal being
received by the WM400(D) receiver.
3. RF Indicators
When the RF indicator illuminates, it
shows that the transmitter’s signal is
being received successfully. If for some
reason this LED does not turn on, check
your DC power input and pre-set chan-
nel conguration and try again.
4. Bypass Indicator
(WM400D-L and WM400D-R only)
This LED will light up when the digital
processing feature of the WM400(D) receiver is off.
5. Power Button
hold this button down for 2 seconds to
power up the unit.
6. Bypass Button
(WM400D-L and WM400D-R only)
Push this button to turn the digital
processing feature on and off.
2
10
13
9
3
5
8
WM400
WM400D
1
4
5
6
7
13
10
2
3
6
WM 400-R / 400D-R / 400-L / 400D-L
7. Up and Down Buttons
(WM400D-L and WM400D-R only)
These buttons are used to adjust the
properties of various features built-into
the WM400D’s. Pushing up or down will
initially simply allow users to adjust the
channel that the transmitter is using. If
you push both of these buttons at the
same time, it will jump to the next setting
that can be edited. You can then adjust
the properties by pushing the up and
down buttons. These settings will come
in the following order:
Channel Settings: CH 0 – CH 9,
CH A – CH F
Delay Settings: 0.0 – 300.0 milliseconds
EQ Mode: P1 – P30 (see the EQ table
for a full rundown on EQ presets)
Low Cut Filter: L 20 (Hz) – L 12 (kHz)
High Cut Filter: H 20 (kHz) – H 60 (Hz)
The high and low cut lters are adjusted in 1 Hz
increments; 10 Hz increments when over 1 kHz.
8. Channel Selector
(WM400-L and WM400-R only)
Adjusting this dial to one of the preset
channels allows the WM400 to know
which pre-set frequency to look for
the wireless information. The wireless
transmitter should be set to the identical
channel if transmission is to occur suc-
cessfully.
9. On Indicator
(WM400-L and WM400-R only)
This LED indicator illuminates when the
WM400(D) receiver is powered.
10. Antenna
This is the WM400(D)’s antenna. Adjust
it so it sits in a vertical position when the
device is in use (change the position if
the wireless signal quality is poor). Push
the antenna in to release it before ad-
justing its position.
WM400D
1
4
5
6
7
13
10
2
3
WM400
2
10
13
9
3
5
8
12
10
11
11.
DC In and clip
Plug DC end of the supplied DC power
adaptor (12V, 200mA) into this jack, and
the other end into a suitable AC power
source to allow the WM400(D) to be
powered. The accompanying clip ensures the DC head of the power supply
is kept securely in place.
12. XLR Output
This jack accepts XLR connectors to
feed the signal from the Wireless Receiver to the Speaker.
13. Fixing
Use this hole to secure the WM400(D)
receiver into the mounting socket of your
speaker by use of the accompanying
M6, M8 or M10 screws and a washer.
7
WM 400-R / 400D-R / 400-L / 400D-L
WM400(D) POWER MODES
Since some users will mount their WM400(D)
with a speaker in a high position, Phonic
thought it would be handy to make it so users could keep the power on constantly, as
long as power is supplied to the unit and thus
avoiding having to climb up high to push the
power button. To make this adjustment, users
are advised to follow the follow procedure:
1. Remove the two screws on the rear of the
WM400(D) receiver and the antenna.
2. Remove the screw on the bottom of the
WM400(D) beside the XLR output (the
screw closer to the rear panel)
3. Remove the rear section of the casing by
gripping the WM400(D) on both sides,
squeezing and lifting up, in the process
detaching the small clips within the casing.
4. A small switch should be visible on the
PCB. Flick it to the left to ensure the power
of the WM400(D) does not turn off without
you pushing the power button.
5. Be sure to replace the casing and screws
before using the WM400(D) receiver.
Unscrew the antenna
Unscrew the two screws
located on the rear panel
Unscrew the screw on
just below the XLR jack
Move the switch to t he l eft to ensure the
power i s always on. T o the right, the
power button will need to be pushed and
held down to turn the unit on.
Loading...