Philips XL6651C/22, XL6652C/38, XL6651C/38, XL6651C/FT, XL6652C/22 User Manual
...
Register your product and get support at
www.philips.com/welcome
XL 665
To insert with
Telephone Answering Machine
!
Warning
Use only rechargeable batteries.
Charge the handset for 24 hours before use.
Table of contents
1Important 4
1.1 Power requirements 4
1.2 Using GAP standard
compliance 5
1.3 Conformity 5
1.4 Environmental 6
1.5 Recycling & disposal 6
1.6 Electric, Magnetic and
Electromagnetic Fields ("EMF") 6
2 Your phone 8
2.1 What’s in the box 8
3.7 What is standby mode? 15
3.8 Checking the signal strength 15
3.9 Missing handset(s) 15
3.10 Menu structure 16
4Call 17
4.1 Making a call 17
4.2 Ending a call 17
4.3 Answering a call 18
4.4 During a call 18
4.5 Using handsfree 18
2.2 Overview of your phone 9
2.3 Overview of the base station 10
2.4 Display icons 11
2.5 The menus 11
3Getting started 12
3.1 Connect the base station 12
3.2 Connect your charger 12
3.3 Install your handset 12
3.4 Checking the battery level 13
3.5 Welcome mode 13
4.6 Using quick dial 18
5 Intercom and
5.1 Calling another handset 20
5.2 Transferring a call 20
5.3 Making a conference call 20
6 Text and Numbers 22
6.1 Entering text and numbers 22
7 Phonebook 23
7.1 Viewing the phonebook 23
Conference Calls 20
3.6 Setting the clock 14
Table of contents 1
7.2 Calling from the phonebook 23
Table of contents
7.3 Adding a record 23
7.4 Editing a record 24
7.5 Deleting a record 24
7.6 Deleting all records 24
8 Call log 25
8.1 Viewing the call records 25
8.2 Returning a call 25
8.3 Saving a call record to your
phonebook 25
8.4 Deleting a call record 25
10.2 Personalizing your phone’s
sounds 27
10.3 Auto conference 27
11 Advanced Settings 28
11.1 ECO mode 28
11.2 Registering handset(s) 28
11.3 Recall selection 29
11.4 Dial mode 29
11.5 Area code management 29
11.6 Carrier code 29
8.5 Deleting all call records 25
9 Redial List 26
9.1 Viewing the redial records 26
9.2 Redialing a call 26
9.3 Saving a redial record to
your phonebook 26
9.4 Deleting a redial record 26
9.5 Deleting all redial records 26
10 Custom Options 27
10.1 Personalizing your phone’s
display 27
11.7 Restoring default settings 30
12 The Answering Machine 31
12.1 Turning the answering
machine on or off 31
12.2 Greeting message 31
12.3 Incoming messages (ICM) 32
12.4 Call screening 33
12.5 Setting the ring delay 33
12.6 Setting the answering
machine language 33
2Table of contents
Table of contents
13 Default (pre-programmed)
settings 34
14 Technical Data 35
15 Frequently asked
questions 36
16 Index 38
Table of contents 3
1Important
This product is not designed for making
emergency telephone calls when the
power fails. Alternative arrangements
should be made for access to emergency
services.
1.1 Power requirements
• This product requires an electrical
supply of 100-240 volts, single-phase
alternating current, excluding IT
installations defined in standard EN
60950 and AS/NZS 60950.1.
• The electrical network is classified as
dangerous according to criteria in the
standard EN 60950 and AS/NZS
60950.1. The only way to power down
this product is by unplugging the
power supply from the electrical
outlet. Ensure the electrical outlet is
located close to the apparatus and is
always easily accessible.
• The voltage on the network is classified as
TNV-3 (Telecommunication Network
Voltages, as defined in the standard EN
60950 and AS/NZS 60950.1). Following a
power cut, the call in progress, as well as
the date and time settings will be lost.
!
Warning
• Do not allow the handset to come into
contact with liquids or moisture.
• Do not open the handset, base station
or charger. This could expose you to
high voltages.
• Do not allow the charging contacts or
the battery to come into contact with
conductive materials.
• There is a slight chance that your
product could be damaged by an
electrical storm. We recommend that
you unplug the product from the
power supply and telephone socket
during a storm.
• Do not use the handset in an explosive
hazard area such as where there is gas
leaking.
• It is recommended that this product is
not used near intensive care medical
equipment or by persons with
pacemakers.
• This product can interfere with electrical
equipment such as answering machines,
television, radio, and computers if placed
too close. We recommend that you
position the base station at least one
meter from such appliances.
• Use only the mains adapter supplied
with this equipment. Incorrect adapter
polarity or voltage can seriously
damage the unit.
Base adapter:
Philips S005CB0500050 (for UK & IE only)
or S005CS0500050 (for AUS. & N.Z. only)
Input: 100-240VAC/150mA, 50/60 Hz
Output: 5 VDC, 500mA
Charger adapter:
Philips S002CB0500021 (for UK & IE only)
or S002CS0500021 (for AUS. & N.Z. only)
Input: 100-240VAC/100mA, 50/60 Hz
Output: 5 VDC, 210mA
• CAUTION: RISK OF EXPLOSION IF
BATTERY IS REPLACED BY AN
INCORRECT TYPE. Use only with
Philips, type no.: Multi-Life 600mAh
(2x 1.2V AAA 600mAh Ni-MH)
rechargeable battery. Use only the
recommended type supplied with this
4Important
!
product. Dispose of used batteries
according to the instructions.
Recommended type:
Philips 1.2V
600mAh AAA re-chargeable
batteries, Multi-Life 600mAh
• Handsfree activation could suddenly
increase the volume in the earpiece to
a very high level: make sure the
handset is not too close to your ear.
• This equipment is not designed to
make emergency calls when the power
fails. An alternative has to be made
available to allow emergency calls.
• Do not expose the phone to excessive
heat caused by heating equipment or
direct sunlight.
• Do not drop your phone or allow
objects to fall on your phone.
• Do not use any cleaning agents
containing alcohol, ammonia, benzene,
or abrasives as these may harm the
set.
• Do not use the product in places
where there are explosive hazards.
• Do not let small metal objects come
into contact with the product. This can
deteriorate audio quality and damage
the product.
• Active mobile phones in the vicinity
Warning
Metallic objects may be retained if placed
near or on the handset receiver.
1.2 Using GAP standard
compliance
The GAP standard guarantees that all
DECT™ GAP handsets and base stations
comply with a minimum operating
standard irrespective of their make.
XL665 handset and base station are GAP
compliant, which means they guarantee
the minimum functions: register a
handset, take the line, make a call and
receive a call. The advanced features may
not be available if you use them with
other makes.
To register and use XL665
handset with a GAP compliant base
station of different make, first follow the
procedure described in the
manufacturer’s instructions, then follow
the procedure described in this
manual for registering a handset.
To register a handset from different make
to XL665 base station, put the
base station in registration mode, then
follow the procedure described in the
handset manufacturer’s instructions.
may cause interference.
About operating and storage
temperatures:
• Operate in a place where temperature
is always between 0 and 35º C.
• Store in a place where temperature is
always between -20 and 45º C.
• Battery life may be shortened in low
temperature conditions.
1.3 Conformity
We, Philips declare that the product is in
compliance with the essential
requirements and other relevant
provisions of Directive 1999/5/EC. This
product can only be connected to the
analogue telephone networks of the
countries mentioned on the packaging.
You can find the Declaration of
Conformity on www.p4c.philips.com.
Important 5
1.4 Environmental
Remember to observe local regulations
regarding the disposal of your packaging
materials, exhausted batteries and old
equipment. Promote their recycling
where possible.
1.5 Recycling & disposal
Disposal instructions for old products:
The purpose of the WEEE directive
(Waste Electrical and Electronic
Equipment; 2002/96/EC) is to ensure that
products are recycled using the best
available treatment, recovery and recycling
techniques to ensure human health and
high environmental protection. Your
product is designed and manufactured with
high quality materials and components
which can be recycled and reused.
Do not dispose of your old product in
your general household waste bin.
Inform yourself about the local separate
collection system for electrical and
electronic products marked by this
symbol.
Use one of the following disposal options:
• Dispose of the complete product
(including its cables, plugs and
accessories) in the designated WEEE
collection facilities.
• If you purchase a replacement
product, hand your complete old
product back to the retailer. The shop
should accept it as required by the
WEEE directive.
Disposal instructions for batteries:
Batteries should not be
disposed of with general
household waste.
Packaging information:
Philips has marked the packaging with
standard symbols designed to promote
the recycling and appropriate disposal of
your eventual waste.
A financial contribution has been
paid to the associated national
recovery & recycling system.
The labelled packaging material is
recyclable.
1.6 Electric, Magnetic and
Electromagnetic Fields
("EMF")
1. Philips Royal Electronics
manufactures and sells many
consumer oriented products which
usually, as with any electronic
apparatus, have the ability to emit
and receive electro magnetic signals.
2. One of Philips' leading Business
Principles is to take all necessary
health and safety precautions for our
products, to comply with all
applicable legal requirements and to
stay well within the EMF standards
applicable at the time of producing
the products.
3. Philips is committed to develop,
produce and market products that
cause no adverse health effects.
6Important
4. Philips confirms that if its products
are handled properly for their
intended use, they are safe to use
according to scientific evidence
available today.
5. Philips plays an active role in the
development of international EMF
and safety standards, enabling Philips
to anticipate further developments
in standardisation for early
integration in its products.
Important 7
2 Your phone
Congratulations on your purchase and welcome to Philips!
To fully benefit from the support that Philips offers, register your product at
www.philips.com/welcome.
2.1 What’s in the box
HandsetBase station Battery door
Power supply
User Manual
Note
*The line adapter may not be attached to the line cord. You may find the line adapter
in the box. In this case, you have to connect the line adapter to the line cord first before
plugging the line cord to the line socket.
In multi-handset packs, you will find one or more additional handsets, chargers with
power supply units and additional rechargeable batteries.
8 Your phone
NiMH AAA Rechargeable
Batteries x 2
Guarantee
Line Cord*
Quick start
guide
2.2 Overview of your phone
EDown key
Scroll down menu
Decrease earpiece and loudspeaker
volume
F Up key
Scroll up menu
Increase earpiece and loudspeaker
volume
G Talk / End key
Make and receive calls
End call
H Speaker key
Turn speaker on / off
I Phonebook key
Enter phonebook
JStar key
Dial *
<
C
:
v
e
*
AEarpiece
B Memory keys
Quick dial your stored phone
numbers
C Left Softkey
Select the function displayed on the
handset screen directly above it.
Enter received calls and redial lists
Mute/unmute microphone
DRight Softkey
Select the function displayed on the
handset screen directly above it.
Access main menu
Exit menu / operation
MN
(
(
K Intercom / Conference key
Dial 0
Make intercom call
Make conference call
LPause key
Dial # and enter pause
M Microphone
#
0
Your phone 9
2.3 Overview of the base station
NLoudspeaker
O Battery door
A Paging key
Find handset(s)
Enter registration mode
B Volume up/down
Increase/Decrease speaker volume
C Previous key
Skip backward during playback
D Next key
Skip forward during playback
E Play/Stop key
Play messages
Stop message playback
F Delete key
Delete messages
G On/Off key
Turn the answering machine on/off
_
,
[
]
p
f
o
10 Your phone
H Message counter
Display message number
Display answering machine operation
2.4 Display icons
Each icon gives you a visual message of
what is happening on your handset.
2.5 The menus
Your phone offers a variety of features
and functions grouped in the menus.
2.5.1 Browsing the menus
The main menu includes the Date & Time,
Ring Tones, Language, Key Beep,
Conference and Answering Machine
menus.
Battery is fully charged
Battery is fully discharged
Call in progress
Voicemail indicator
Call log
Speaker on
Ringer off
Answering machine
From standby mode, you can,
• Press the right softkey
to enter the main menu.
• Press the left softkey
to enter the received calls and redial
lists.
• Press
Use
menus.
Exit to previous menu.
softkey
previous menu. All unconfirmed changes
will not be saved.
e to enter the phonebook.
Tip
C or < to navigate the
Tip
)
BACK
(
(
Press the right
to exit to the
MENU
CALLS
Signal strength
ECO mode*
*When the ECO mode is activated, this
icon will replace the icon in the display.
Your phone 11
Loading...