Philips XL6601C/38, XL6601C/FT, XL6601C/23, XL 660 User Manual

Register your product and get support at

www.philips.com/welcome

XL 660

To insert with

AUS EN Telephone

!

Warning

Use only rechargeable batteries.
Charge the handset for 24 hours before use.

Table of contents

1Important 4

1.1 Power requirements 4

1.2 Using GAP standard
compliance 5

1.3 Conformity 5

1.4 Environmental 6

1.5 Recycling & disposal 6

1.6 Electric, Magnetic and
Electromagnetic Fields ("EMF") 6

2 Your phone 8

2.1 What’s in the box 8

3.6 Setting the clock 14

3.7 What is standby mode? 15

3.8 Checking the signal strength 15

3.9 Missing handset(s) 15

3.10 Menu structure 16

4Call 17

4.1 Making a call 17

4.2 Ending a call 17

4.3 Answering a call 18

4.4 During a call 18

2.2 Overview of your phone 9

2.3 Overview of the base station 10

2.4 Display icons 11

2.5 The menus 11

3Getting started 12

3.1 Connect the base station 12

3.2 Connect your charger 12

3.3 Install your handset 12

3.4 Checking the battery level 13

3.5 Welcome mode 13

4.5 Using handsfree 18

4.6 Using quick dial 18

5 Intercom and

5.1 Calling another handset 20

5.2 Transferring a call 20

5.3 Making a conference call 20

6 Text and Numbers 22

6.1 Entering text and numbers 22

Conference Calls 20

Table of contents 1

Table of contents

7 Phonebook 23

7.1 Viewing the phonebook 23

7.2 Calling from the phonebook 23

7.3 Adding a record 23

7.4 Editing a record 24

7.5 Deleting a record 24

7.6 Deleting all records 24

8 Call log 25

8.1 Viewing the call records 25

8.2 Returning a call 25

9.4 Deleting a redial record 26

9.5 Deleting all redial records 26

10 Custom Options 27

10.1 Personalizing your phone’s
display 27

10.2 Personalizing your phone’s
sounds 27

10.3 Auto conference 27

11 Advanced Settings 28

11.1 ECO mode 28

11.2 Registering handset(s) 28

8.3 Saving a call record to
your phonebook 25

8.4 Deleting a call record 25

8.5 Deleting all call records 25

9 Redial List 26

9.1 Viewing the redial records 26

9.2 Redialing a call 26

9.3 Saving a redial record to
your phonebook 26

11.3 Recall selection 29

11.4 Dial mode 29

11.5 Area code management 29

11.6 Carrier code 30

11.7 Restoring default settings 30

2Table of contents

12 Default (pre-programmed)

settings 31

13 Technical Data 32

14 Frequently asked

questions 33

15 Index 35

Table of contents 3

1Important

This product is not designed for making
emergency telephone calls when the
power fails. Alternative arrangements
should be made for access to emergency
services.

1.1 Power requirements

• This product requires an electrical

supply of 100-240 volts, single­phase alternating current, excluding
IT installations defined in standard
AS/NZS 60950.1.

• The electrical network is classified as

dangerous according to criteria in the
standard AS/NZS 60950.1. The only
way to power down this product is by
unplugging the power supply from the
electrical outlet. Ensure the electrical
outlet is located close to the apparatus
and is always easily accessible.

• The voltage on the network is classified

as TNV-3 (Telecommunication
Network Voltages, as defined in the
standard AS/NZS 60950.1). Following
a power cut, the call in progress, as well
as the date and time settings will be lost.

!

Warning

• Do not allow the handset to come into

contact with liquids or moisture.

• Do not open the handset, base station

or charger. This could expose you to
high voltages.

• Do not allow the charging contacts or

the battery to come into contact with
conductive materials.

• There is a slight chance that your

product could be damaged by an

electrical storm. We recommend that
you unplug the product from the
power supply and telephone socket
during a storm.

• Do not use the handset in an explosive
hazard area such as where there is gas
leaking.

• It is recommended that this product is
not used near intensive care medical
equipment or by persons with
pacemakers.

• This product can interfere with
electrical equipment such as answering
machines, television, radio, and
computers if placed too close. We
recommend that you position the base
station at least one meter from such
appliances.

• Use only the mains adapter supplied
with this equipment. Incorrect adapter
polarity or voltage can seriously
damage the unit.

Base adapter:

Philips S005CS0500050
Input: 100-240VAC/150mA, 50/60 Hz
Output: 5 VDC, 500mA

Charger adapter:

Philips S002CS0500021
Input: 100-240VAC/100mA, 50/60 Hz
Output: 5 VDC, 210mA

• CAUTION: RISK OF EXPLOSION IF
BATTERY IS REPLACED BY AN
INCORRECT TYPE. Use only with
Philips, type no.: Multi-Life 600mAh
(2x 1.2V AAA 600mAh Ni-MH)
rechargeable battery. Use only the
recommended type supplied with this
product. Dispose of used batteries
according to the instructions.

4Important

!

Recommended type:

Philips 1.2V

600mAh AAA re-chargeable

batteries, Multi-Life 600mAh

Warning

Metallic objects may be retained if placed
near or on the handset receiver.

• Handsfree activation could suddenly
increase the volume in the earpiece to
a very high level: make sure the
handset is not too close to your ear.

• This equipment is not designed to
make emergency calls when the power
fails. An alternative has to be made
available to allow emergency calls.

• Do not expose the phone to excessive
heat caused by heating equipment or
direct sunlight.

• Do not drop your phone or allow
objects to fall on your phone.

• Do not use any cleaning agents
containing alcohol, ammonia, benzene,
or abrasives as these may harm the
set.

• Do not use the product in places
where there are explosive hazards.

• Do not let small metal objects come
into contact with the product. This can
deteriorate audio quality and damage
the product.

• Active mobile phones in the vicinity
may cause interference.

About operating and storage

1.2 Using GAP standard
compliance

The GAP standard guarantees that all
DECT™ GAP handsets and base stations
comply with a minimum operating
standard irrespective of their make.
XL660 handset and base station are GAP
compliant, which means they guarantee
the minimum functions: register a
handset, take the line, make a call and
receive a call. The advanced features may
not be available if you use them with
other makes.
To register and use XL660
handset with a GAP compliant base
station of different make, first follow the
procedure described in the
manufacturer’s instructions, then follow
the procedure described in this
manual for registering a handset.
To register a handset from different make
to XL660 base station, put the
base station in registration mode, then
follow the procedure described in the
handset manufacturer’s instructions.

temperatures:

• Operate in a place where temperature
is always between 0 and 35º C.

• Store in a place where temperature is
always between -20 and 45º C.

• Battery life may be shortened in low
temperature conditions.

1.3 Conformity

We, Philips declare that the product is in
compliance with the essential
requirements and other relevant
provisions of Directive 1999/5/EC. This
product can only be connected to the
analogue telephone networks of the
countries mentioned on the packaging.
You can find the Declaration of
Conformity on www.p4c.philips.com.

Important 5

1.4 Environmental

Remember to observe local regulations
regarding the disposal of your packaging
materials, exhausted batteries and old
equipment. Promote their recycling
where possible.

1.5 Recycling & disposal

Disposal instructions for old products:
The purpose of the WEEE directive
(Waste Electrical and Electronic
Equipment; 2002/96/EC) is to ensure that
products are recycled using the best
available treatment, recovery and recycling
techniques to ensure human health and
high environmental protection. Your
product is designed and manufactured with
high quality materials and components
which can be recycled and reused.
Do not dispose of your old product in
your general household waste bin.
Inform yourself about the local separate
collection system for electrical and
electronic products marked by this
symbol.

Use one of the following disposal options:

• Dispose of the complete product
(including its cables, plugs and
accessories) in the designated WEEE
collection facilities.

• If you purchase a replacement
product, hand your complete old
product back to the retailer. The shop
should accept it as required by the
WEEE directive.

Disposal instructions for batteries:
Batteries should not be
disposed of with general
household waste.

Packaging information:
Philips has marked the packaging with
standard symbols designed to promote
the recycling and appropriate disposal of
your eventual waste.

A financial contribution has been
paid to the associated national
recovery & recycling system.
The labelled packaging material is
recyclable.

1.6 Electric, Magnetic and

Electromagnetic Fields
("EMF")

1. Philips Royal Electronics

manufactures and sells many
consumer oriented products which
usually, as with any electronic
apparatus, have the ability to emit
and receive electro magnetic signals.

2. One of Philips' leading Business

Principles is to take all necessary
health and safety precautions for our
products, to comply with all
applicable legal requirements and to
stay well within the EMF standards
applicable at the time of producing
the products.

3. Philips is committed to develop,

produce and market products that
cause no adverse health effects.

6Important

4. Philips confirms that if its products
are handled properly for their
intended use, they are safe to use
according to scientific evidence
available today.

5. Philips plays an active role in the
development of international EMF
and safety standards, enabling Philips
to anticipate further developments
in standardisation for early
integration in its products.

Important 7

2 Your phone

Congratulations on your purchase and welcome to Philips!

To fully benefit from the support that Philips offers, register your product at
www.philips.com/welcome.

2.1 What’s in the box

HandsetBase station Battery door

Power supply

User Manual

Note

*The line adapter may not be attached to the line cord. You may find the line adapter
in the box. In this case, you have to connect the line adapter to the line cord first before
plugging the line cord to the line socket.

In multi-handset packs, you will find one or more additional handsets, chargers with
power supply units and additional rechargeable batteries.

8 Your phone

NiMH AAA Rechargeable

Batteries x 2

Guarantee

Line Cord*

Quick start

guide

2.2 Overview of your phone

EDown key

Scroll down menu
Decrease earpiece and loudspeaker
volume

F Up key

Scroll up menu
Increase earpiece and loudspeaker
volume

G Talk / End key

Make and receive calls
End call

H Speaker key

Turn speaker on / off

I Phonebook key

Enter phonebook

JStar key

Dial *

<

C

:

v

e

*

AEarpiece

B Memory keys

Quick dial your stored phone
numbers

C Left Softkey

Select the function displayed on the
handset screen directly above it.
Enter received calls and redial lists
Mute/unmute microphone

DRight Softkey

Select the function displayed on the
handset screen directly above it.
Access main menu
Exit menu / operation

MN

(

(

K Intercom / Conference key

Dial 0
Make intercom call
Make conference call

LPause key

Dial # and enter pause

M Microphone

#

0

Your phone 9

2.3 Overview of the base station

NLoudspeaker

O Battery door

A Paging key

Find handset(s)
Enter registration mode

_

10 Your phone