Philips WiZ E14 Multicolour Smart LED Wi-Fi Bulb User guide

Product Information Sheet

COMMISSION DELEGATED REGULATION (EU) 2019/2015 with regard to energy labelling of light
sources

Supplier's name or trade mark: PHILIPS

Supplier's address: Customer Care Philips, I.B.R.S./C.C.R.I. /Numéro 10461, 5600VB Eindhoven, NL

Model identifier: 9290034997

Type of light source:

Lighting technology used: LED Non-directional or

directional:

Light source cap-type

(or other electric interface)
Mains or non-mains: MLS Connected light

Colour-tuneable light source: Yes Envelope: ­High luminance light source: No
Anti-glare shield: No Dimmable: Only with spe-

Parameter Value Parameter Value

General product parameters:

Energy consumption in on­mode (kWh/1000 h), rounded
up to the nearest integer

Useful luminous flux (ɸuse), in­dicating if it refers to the flux in
a sphere (360º), in a wide cone
(120º) or in a narrow cone (90º)

On-mode power (Pon), ex­pressed in W

Networked standby power
(P

) for CLS, expressed in W

net

and rounded to the second dec­imal

Outer dimen­sions without
separate con­trol gear, light-

Height 101
Width 45
Depth 45

E14

source (CLS):

Product parameters

5 Energy efficiency

class

470 in

Sphere (360°)

4,9 Standby power (Psb),

0,00 Colour rendering in-

Correlated colour
temperature,
rounded to the near­est 100 K, or the
range of correlat­ed colour temper­atures, rounded to
the nearest 100 K,
that can be set

expressed in W and
rounded to the sec­ond decimal

dex, rounded to the
nearest integer, or
the range of CRI-val­ues that can be set

Spectral power dis­tribution in the
range 250 nm to 800
nm, at full-load

NDLS

Yes

cific dimmers

F

2200...6500

0,00

90

See image

in last page

Page 1 / 3

ing control
parts and non­lighting con­trol parts, if
any (millime­tre)

Claim of equivalent power

(a)

Yes If yes, equivalent

40

power (W)

Chromaticity coordi-

nates (x and y)

0,458
0,410

Parameters for LED and OLED light sources:

R9 colour rendering index value 0 Survival factor 0,90
the lumen maintenance factor 0,93

Parameters for LED and OLED mains light sources:

displacement factor (cos φ1) 0,70 Colour consistency

6

in McAdam ellipses

Claims that an LED light source
replaces a fluorescent light

(b)

-

If yes then replace-

-

ment claim (W)
source without integrated bal­last of a particular wattage.

Flicker metric (Pst LM) 1,0 Stroboscopic effect

0,9

metric (SVM)

(a)

'-' : not applicable;

(b)

'-' : not applicable;

Page 2 / 3

Page 3 / 3