Philips WAS6050 User Manual [pl]

Register your product and get support at

WAS6050/05

WAS6050/12

EN User manual 1

Contact information 40

4 Connect

Connect a PC

Connect AC power

Warning

Risk of product damage! Ensure that the power supply

•

voltage corresponds to the voltage printed on the back
or the underside of the Music Station.
The type plate is located on the rear of the product.

•

1 Connect the Music Station to the power

supply

Your Music Station turns on and is

È

ready for use.

Connect a portable audio
device (AUX)

1 Connect an audio cable (not supplied)

from the AUX jack to the portable audio
device.

Before you connect the Music Station to a PC:

Ensure that the PC meets the minimum

•
requirements. (see ‘PC connection
requirements’ on page
Install the WADM (Philips Wireless Audio

•
Device Manager) on the PC
WADM’ on page
You can choose among two different
modes of connection:
Wired connectio

•
connection’ on page
Wireless connectio

•
connection’ on page

Install WADM

This chapter shows you how to install the
WADM (Philips Wireless Audio Device
Manager) software. The WADM is necessary to
search and download software updates for the
Music Station.

30)

. (see ‘Install

11)

n (see ‘Create wired

11)

n (see ‘Create wireless

12)

1 Insert the PC Suite CD into the PC.
2 Follow the instructions on the PC to install

WADM.

3 When the security alert message

(Microsoft Windows Firewall) pops up,
press ‘Unblock’ to allow the WADM
application to run on the PC.

The rewall is still effective and only

È

allows the WADM to run.

Tip

You can also consult the user manual of the PC and

•

manually add the WADM application to your list of
programs that are safe to run.

En glish

Connect

Create wired connection

1 Ensure that the Ethernet port on the PC is

enabled.

2 Ensure that the WADM (Philips Wireless

Audio Device Manager) software is

11

EN