Place the Center, Station(s) and Extender side by side on
a flat and firm surface
2
Connect the Center and Station(s) to power supply
➜ HD screen appears on the Station when the Station is
connected to the Center
3
Mount on the antenna and then connect the Extender to
power supply.
➜ When the Extender is ready for connection, both Power
and Wireless indicators light up in blue (it takes 10-15
seconds),
ETHERNET
R L
AUX
IN
LINE
OUT
R L
TO Modem/PC5V=1A APECRP
Wireless Repeater 11g True Turbo
VOLTAGE
SELECTOR
NOT FOR ALL
VERSIONS
Wireless
Wireless
Modem PC
Power
Power
IMPORTANT!
• Make sure the selector is set at AP position.
4
On the Center, press and hold SAME ARTIST until the
display shows “OK for Extender...”
5
On the Station(s), press and hold SAME ARTIST until the
display shows “OK for Extender...”
➜ Connecting via the Extender starts (please ignore the
screen message “Center temporarily not available”)
➜ HD screen appears on the Station when the Station is
connected to the Center via the Extender
Note:
• The SAME ARTIST button on the 2-way remote control
that comes with WACS7000 doesn't have this function
SAME
ARTIST
SAME
ARTIST
AP EC RP
TO Modem/PC5V=1A APEC RP
Page 4
Connect to WACS7000
A2
Relocate
1
Unplug the Center, Station(s) and the Extender
2
Place the Extender, Center and Station(s) as shown at
the right side:
a. For Center and one Station
b. For Center and more than one Station
In this case, the maximum distance between the Extender and
Center/Station is about 50m, depending on the actual
environment in your house.
3
Connect the Extender to power supply
➜ Wireless indicator lights up blue when the Extender is
ready for connection
4
Connect the Center and Station(s) to power supply, first
the Center and then the Station(s)
➜ HD screen appears on the Station when the Station has
connected the Center
– indicates maximum reception
– indicates minimum reception
Tips!
• Adjust the distance between the Extender and the
Center/Station(s) according to the Wi-Fi reception status
Max.40~50m
(indoors)
Max.40~50m
(indoors)
a. For Center and one Station
Max.40~50m
b. For Center and more than
one Station
Page 5
B1
Connect to WAK3300
Connect WAR1900 to WAC7000
1
Place WAR1900 side by side with the WAK3300 and its
connected device WAC7000 on a flat and firm surface
2
Mount on the antenna and then connect the WAR1900 to
power supply
➜ Both Power and Wireless indicators light up blue
(takes 10-15 seconds), when Extender is ready for
connection
IMPORTANT!
• Make sure the selector is set at AP position.
3
On WAC7000, press and hold SAME ARTIST until the
display shows "OK for Extender..."
Connecting WAK3300 to WAC7000
SAME
ARTIST
ETHERNET
R L
AUX
IN
LINE
OUT
R L
TO Modem/PC5V=1A APECRP
Wireless Repeater 11g True Turbo
VOLTAGE
SELECTOR
NOT FOR ALL
VERSIONS
Wireless
Wireless
Modem PC
TO Modem/PC5V=1A APEC RP
Power
Power
AP EC RP
1
Place the WAK3300 beside the WAC7000
2
Connect the WAK3300's power cord to a wall outlet
3
Press the navigation controls 3 or 4 and 2 to set language
and clock, then select "Philips Music Center"
4
Check that the WAC7000 is switched on and is already in
the HD mode
Page 6
Connect to WAK3300
Wireless Repeater 11g True Turbo
Wireless
Modem PC
Power
Max.40~50m
(indoors)
Max.40~50m
(indoors)
B2
5
On WAC7000
a. Press MENU to enter the menu screen
b. Press the navigation controls 3 or 4 and 2 to enter
Station Mgnt menu
c. Press 3 or 4 and 2 to select Add New Station
➜ You will enter Installation Mode. Searching for the new
station starts
On WAK3300
a. Press HOME to enter the main menu, and then select the
Settings menu by pressing the navigation controls 3 or 4
and 2
b. Use the navigation controls 3 or 4 and 2 to select
Network followed by Quick Setup
➜ The Select Network screen appears
c. Select “Philips Music Center”
6
On WAC7000, press STOP 9 after all the Stations are
found
Relocate
1
Unplug the WAR1900, the WAK3300 and its connected
device WAC7000
2
Place your Extender,WAK3300 and WAC7000 as shown
3
Connect WAR1900 to power supply
➜ Wireless indicator lights up blue when it is ready for
connection
4
Connect WAK3300 and WAC7000 to power supply
Page 7
C1
Enjoy
Enjoy wireless freedom
The Extender allows you to stream music from Center to Station(s) within a longer distance.
With the connected Wi-Fi extender in between, you can effectively increase the distance
between Center and Station from the max. 30m to about 100m (depending on the actual environment in your house).
Enjoy the freedom of the wireless networking.
For information on how to operate your Center and or Station(s), please refer to their user
manual.
Reset
In case there is problem in setting up connection between
WAR1900 and WACS7000 or WAK3300, press RESET button for at least 5 seconds to reset the extender to its factory
default settings
Default Settings
Password
Default passwordNo password
Network Setting
AP IP address192.168.1.3
DHCP ServerEnabled
Wireless
WirelessEnabled
SSID PHILIPS-EXTENDER
Channel6
Extend RangeEnabled
Wireless Security
SecurityEnabled
WEP mode128 bits
Key Entry methodHEX
WEP5048494C49505331323358595A
Router Information
Current ModeAccess Point
Page 8
C2
Enjoy
Frequently Asked Questions
Q: Why can’t I see the
message “Ok for
Extender ...”
Q: How do I know if the
Extender is working?
Q: Why it's still hard to
create connection
between my Center
and Station(s) after
used the Extender?
A: Please check if the Extender is set at “AP” mode.
A: You may check the connection by pressing Menu >
Information > Wireless > SSID.
A: Please adjust the distance between the Extender and the
Center/Station(s) (refer to "Relocate" step 2)
Important safety information
• Please install and connect the product in the order as described in the 'Quick Start Guide'
booklet only. This assures best installation results with the least technical hassles.
• Please read the 'Quick Start Guide' booklet carefully before using the Wireless Range Extender
(WAR1900); and keep these documents for future reference.
• The most recent downloads and information on this product will be available through our web
site www.philips.com/support
Safety Precautions
• Radio equipment for wireless applications is not protected against disturbance from other radio
services.
• Do not expose the system to excessive moisture, rain, sand or heat sources.
• The product should not be exposed to dripping or splashing. No object filled with liquids, such
as vases, should be placed on the product.
• Keep the product away from domestic heating equipment and direct sunlight
• Allow a sufficient amount of free space all around the product for adequate ventilation.
• Do not open this product. Contact your Philips retailer if you experience technical difficulties.
Page 9
Environmental information
All redundant packing material has been omitted. We have done our utmost to make the
packaging easily separable into two mono materials: cardboard (box) and polyethylene
(bags, protective foam sheet). Your set consists of materials that can be recycled if disassembled
by a specialized company. Please observe the local regulations regarding the disposal of packing
materials and old equipment.
Disposal of your old product
Your product is designed and manufactured with high quality materials and components, which
can be recycled and reused.
When this crossed-out wheeled bin symbol is attached to a product it means the product
is covered by the European Directive 2002/96/EC
Please inform yourself about the local separate collection system for electrical and electronic
products.
Please act according to your local rules and do not dispose of your old products with your
normal household waste. The correct disposal of your old product will help prevent potential
negative consequences for the environment and human health.
Disclaimer
This product is provided by 'Philips' 'as is' and without any express or implied warranty of any
kind of warranties, including, but not limited to, the implied warranties of merchantability and
fitness for a particular purpose are disclaimed.
In no event shall Philips be liable for any direct, indirect, incidental, special, exemplary, or consequential damages (including, but not limited to, procurement of substitute goods or services; loss
of information, data, or profits; or business interruption) howsoever caused and on any theory of
liability, whether in contract, strict liability, or tort (including negligence or otherwise) arising in
any way out of the use of inability to use this product, even if advised of the possibility of such
damages.
Philips further does not warrant the accuracy or completeness of the information, text, graphics,
links or other items transmitted by this product.