Philips VR816, VR807, VR839 User Manual

6 Head Hi-Fi Video Recorder
• Turbo Drive – 75s Rewind Time
• Smart Picture
• Easy Link
• Digital Set Top Box Control
• Showview / VideoPlus +
• Turbo Timer
Silver Shadow
VR 830
VR 830
6 Head Hi-Fi Video Recorder
Product Highlights
• SMART Picture
With SMART picture, you can adapt the picture to your own preference.You can, for example, enhance the contours on a cartoon or suppress the noise from a rental tape. SMART picture offers you the possibility to play your tapes the way you like to see them.
• New Turbo Drive deck
The new Turbo Drive deck offers:
Speed 75-second ultra-fast rewind speed.
Reliability To guarantee an optimum playback reliability, a Dirty Head Warning system will automatically detect when the use of a cleaning tape is necessary and display a message.This comes in addition to the Automatic Head Cleaning which has equipped the Philips’Turbo Drive decks over the past years.
Intelligence The Tape Position Indicator, in wind and re-wind situations, displays the accurate position of the tape on the TV screen and indicates progress by means of a moving/blinking arrow. At any time, you can follow the tape movement on the TV screen.
• Easy Link
Easy Link offers maximum convenience when it comes to installing a VCR.There’s no need to wait endlessly for the tuning of all channels or to spend time re-sorting the presets in the right order.You just connect both VCR and TV with a Scart cable and plug the mains.That’s all! Moreover, features like Automatic On/Off switching of the TV when the VCR is used, Direct Record and automatic 16x9 switching make the daily life of the VCR user much easier.
• Digital Set Top Box Control
This feature offers the possibility to programme the VCR to record a programme from a Satellite receiver When the Timer becomes active, the VCR switches the Set Top Box „On“ by means of a small device (that we affectionately call a „Sat Mouse“) put on the Satellite receiver.The correct channel is automatically selected and the recording starts.When the recording is over, both Set Top Box and VCR are automatically switched back to Stand-By.
• Turbo Timer
Is Timer programming complicated? No! Is Timer programming time consuming? No! Just press the Turbo Timer button on the remote control, select the TV channel you want to record, set the start and the end time.That’s it. All it takes is only a few seconds.
Product Information
Reception - Installation
• Tuner: Hyperband, UHF,VHF
• Tuning - Presets: PLL, CH entry, 99 presets
• TV Related Functions: 16:9 (pin 8), Direct Record, Follow TV,
NexTView Link (Rel 1.3)
• Time/Date Download: PDC (Time/Date),Text (Time)
User Interface
• Record Speed: Long Play, Standard Play
• Record Speed Selection: Auto LP, Per Menu
• Picture Improvement System: Digital Studio Picture Control, SMART Picture
• Audio Recording Level: Automatic
• Special Features: Auto Standby, Channel Name Display
On Tape Standard
• Additional Playback Standard: NTSC Playback on PAL TV
Remote Control Unit
• Remote Control - Type Number: RT227/111
• Remote Control - Codes: VCR1, TV Commands
Connectors Rear
• EXT1: Black, Euro CVBS in/out
• EXT2: Black, Euro CVBS in, Euro Decoder
• Rear Audio Connector: Cinch stereo out
• Terrestrial Antenna In/Out: 75 Ohms (IEC type)
Connectors Front
• Front A/V Connectors: Cinch CVBS in, Cinch stereo in
Tape Deck
• Number of Video / FM Audio / Flying Erase Heads: 4 / 2 / 0
• Play: +1, Repeat
• Still Features: Perfect
• Index Related Functions: Next/Prev. index search
• Head Cleaning: Automatic, Dirty Head Warning
• Tape Length Recognition: Automatic
• Tape Counter: Linear Relative (h.m.s),Tape Position Indicator,Time Left (h.m)
• Winding / Rewinding Time (E180): 75 sec.
Programming
• Number of Events: 8/year
• Special Timer Programming: Turbo Timer
• Record Link: SCART 2
General
• Voltage: 198 - 264 V
• Frequency: 50Hz
• Backup Presets: 1yr
• Backup Clock - Calendar - Timer Event: 1mn
• Power Consumption SB in Watts: <4
• Set Size - W x D x H in mm: 435 x 223 x 98
• Equipement Supplied: Aerial Cable, Batteries for RC
VR 830
VR 830
Subject to modification without notice
Show View Deluxe and Video+ Deluxe are registered Trademarks of Gemstar Development Cooperation.
VR830/58 VR830/39 VR830/16 VR830/07 VR830/02
TV Systems Off Air PAL B/G, PAL D/K, PAL B/G, SECAM B/G, PAL B/G PAL I PAL B/G
SECAM B/G, SECAM D/K SECAM L/L1
Sound Systems German Stereo, Mono, German Stereo, Mono, German Stereo, Mono, Mono, NICAM German Stereo, Mono
NICAM NICAM NICAM
OSD Menu Languages English, Polish, Dutch, French, German Dutch, English, French, English Dutch, English, French,
Russian Cyrillic German, Italian, German, Italian,
Spanish, Swedish Spanish, Swedish Record / Playback Standard MESECAM, PAL MESECAM, PAL, SECAM PAL PAL PAL Record Control & PDC, VPS PDC, VPS PDC, VPS PDC PDC, VPS Transmitter Identification Programming System Showview Deluxe, Showview Deluxe, Showview Deluxe,
VideoPlus + Deluxe,
Showview Deluxe,
Manual Timer, Manual Timer, Manual Timer, Manual Timer, Manual Timer,
One Touch Recording One Touch Recording One Touch Recording One Touch Recording One Touch Recording
Loading...