Philips ultrafill Quick Start Manual

UltraFill

Patient quick start guide

Startup checklist

Before filling UltraFill oxygen cylinders, check to make sure that the system is

setup correctly. Follow the Startup checklist below to ensure proper filling.

Action How to verify

1

2

3

Tubing is properly
connected between
UltraFill and the oxygen
concentrator. Check for
kinks.

Oxygen concentrator is
powered on.

Oxygen concentration
level is properly set.

EverFlo should be at or
below 3 LPM.

Inspect visually.

Green light on top panel
should be lit. If not, check
that the power cord is
plugged in and the power
button is depressed. If the
problem persists, contact
your homecare provider.

Check the concentrator’s
flow meter.

4

UltraFill is powered on. Green light on top panel

should be lit. If not, check
that the power cord is
plugged in and the power
button is depressed. If the
problem persists, contact
your homecare provider.