Philips TDA8395T-N3, TDA8395T-N2, TDA8395T-N1, TDA8395P-N2 Datasheet

DATA SH EET
Preliminary specification File under Integrated Circuits, IC02
October 1991
INTEGRATED CIRCUITS
TDA8395
SECAM decoder
Philips Semiconductors Preliminary specification
SECAM decoder TDA8395
FEATURES
Fully integrated filters
Alignment free
For use with baseband delay
GENERAL DESCRIPTION
The TDA8395 is a self-calibrating, fully integrated SECAM decoder. The IC should preferably be used in conjunction with the PAL/NTSC decoder TDA8362 or TDA8366 and with the switched capacitor baseband delay circuit TDA4660. The IC incorporates HF and LF filters, a demodulator and an identification circuit (luminance is not processed in this IC). The IC needs no adjustments and very few external components are required. A highly stable reference frequency is required for calibration and a two-level sandcastle pulse for blanking and burst gating.
QUICK REFERENCE DATA
ORDERING INFORMATION
Note
1. SOT38-1; 1996 December 3.
SYMBOL PARAMETER MIN. TYP. MAX. UNIT
V
P
positive supply voltage; pin 3 7.2 8.8 V
P
tot
total power dissipation −−220 mW
V
16(p-p)
composite video input voltage (peak-to-peak value); pin 16
1.0 1.5 V
V
O(p-p)
(RY) output voltage amplitude (peak-to-peak value); pin 9
1.05 V
V
O(p-p)
(BY) output voltage amplitude (peak-to-peak value); pin 10
1.33 V
EXTENDED TYPE NUMBER
PACKAGE
PINS PIN POSITION MATERIAL CODE
TDA8395 16 DIL plastic SOT38GE1
(1)
Philips Semiconductors Preliminary specification
SECAM decoder TDA8395
Fig.1 Block diagram.
Fig.2 Pin configuration
PINNING
SYMBOL PIN DESCRIPTION
f
ref/
IDENT 1 reference frequency
input/identification input TEST 2 test output V
P
3 positive supply voltage n.c. 4 not connected n.c. 5 not connected GND 6 ground CLOCHE
ref
7 Cloche reference filter PLL
ref
8 PLL reference
(RY) 9 (RY) output
(BY) 10 (BY) output
n.c. 11 not connected n.c. 12 not connected n.c. 13 not connected n.c. 14 not connected SAND 15 sandcastle pulse input CVBS 16 video (chrominance) input
Loading...
+ 7 hidden pages