Philips TDA8012AM-C1 Datasheet

DATA SH EET
Product specification File under Integrated Circuits, IC02
1997 May 26
INTEGRATED CIRCUITS
TDA8012AM
Low power PLL FM demodulator for satellite TV receivers
1997 May 26 2
Philips Semiconductors Product specification
Low power PLL FM demodulator for satellite TV receivers
TDA8012AM
FEATURES
High input sensitivity
Fully balanced two-pin Voltage Controlled Oscillator
(VCO)
Low input impedance (50 Ω)
Low impedance video baseband output
Internal voltage stabilizer
Keyed Automatic Frequency Control (AFC) or peak AFC
Carrier detector
Automatic Gain Control (AGC) output.
APPLICATIONS
Digital Broadcast System (DBS) satellite receivers.
GENERAL DESCRIPTION
The TDA8012AM is a sensitive Phase Locked Loop (PLL) Frequency Modulation (FM) demodulator for the second Intermediate Frequency (IF) in satellite receivers. It provides Automatic Gain Control (AGC) and Automatic Frequency Control (AFC) outputs that can be used to optimize the level and the frequency of the signal applied at the input. During the search procedure, the AFC output provides a signal used for carrier detection.
QUICK REFERENCE DATA
ORDERING INFORMATION
SYMBOL PARAMETER CONDITIONS MIN. TYP. MAX. UNIT
V
CC
supply voltage 4.75 5.0 5.25 V
I
CC
supply current VCC=5V; T
amb
=25°C 405060mA
V
i
input level 53 57 61 dBµV
f
c
operating carrier frequency 480 MHz
V
o(p-p)
video output signal amplitude (peak-to-peak value)
frequency deviation = 25 MHz 1 V
TYPE
NUMBER
PACKAGE
NAME DESCRIPTION VERSION
TDA8012AM SSOP20 plastic shrink small outline package; 20 leads; body width 4.4 mm SOT266-1
1997 May 26 3
Philips Semiconductors Product specification
Low power PLL FM demodulator for satellite TV receivers
TDA8012AM
BLOCK DIAGRAM
Fig.1 Block diagram.
handbook, full pagewidth
MBH934
3
4
STABILIZER
VCO
VIDEO BUFFER
TDA8012AM
1
2
5
6
7 8
9
10
CDF1 CDF2
PD
+
PD
IFI1 IFI2
GND
CC
V
AGCO
V
th(AGC)
VIDEO
LF1
LF2
OSCGND
VCO1
VCO2
AFCF
KEY
AFC/CDO
AFCOS
20
19 18
17
16
15 14
13
12
11
CARRIER
DETECTOR
AFC
AGC
1997 May 26 4
Philips Semiconductors Product specification
Low power PLL FM demodulator for satellite TV receivers
TDA8012AM
PINNING
SYMBOL PIN DESCRIPTION
CDF1 1 carrier detector filter 1 input CDF2 2 carrier detector filter 2 input PD+ 3 positive peak detector output PD 4 negative peak detector output IFI1 5 intermediate frequency input 1 IFI2 6 intermediate frequency input 2 GND 7 general ground V
CC
8 supply voltage AGCO 9 automatic gain control output V
th(AGC)
10 automatic gain control threshold
voltage input VIDEO 11 baseband signal output LF1 12 loop filter 1 input LF2 13 loop filter 2 input OSCGND 14 oscillator ground VCO1 15 oscillator tank circuit 1 input VCO2 16 oscillator tank circuit 2 input AFCF 17 automatic frequency control filter
input KEY 18 key pulse input AFC/CDO 19 automatic frequency control
/carrier detector output AFCOS 20 automatic frequency control of fset
input
Fig.2 Pin configuration.
handbook, halfpage
TDA8012AM
MBH931
1 2 3 4 5 6 7 8 9
10
20 19 18 17 16 15 14 13 12 11
CDF1
CDF2
IFI1 IFI2
GND
AGCO
V
CC
V
th(AGC)
PD
+
PD
AFCOS
VIDEO
LF1
LF2
OSCGND
VCO1
VCO2
AFCF
KEY
AFC/CDO
FUNCTIONAL DESCRIPTION
The TDA8012AM is a low power PLL FM demodulator designed for use in satellite TV reception systems.
The demodulator is based on a PLL structure including a fully balanced two-pin VCO. A high gain IF amplifier ensures a high input sensitivity. The video output voltage is supplied through a highly-linear video buffer with a low output impedance. The centre frequency of the VCO and the loop characteristics can be set by external components (see Fig.4).
The circuit provides an AGC signal which is used to drive a gain-controlled IF amplifier (TDA8011T or TDA8010AM) for a stable PLL demodulation characteristic.
An analog AFC voltage is available. This signal fits in with the input of the A/D converter port of the PLL frequency synthesizer (TSA5055). The AFC function may be keyed to address D2MAC systems.
The TDA8012AM includes a Carrier Detector (CD) used for channel detection during search procedures.
1997 May 26 5
Philips Semiconductors Product specification
Low power PLL FM demodulator for satellite TV receivers
TDA8012AM
LIMITING VALUES
In accordance with the Absolute Maximum Rating System (IEC 134).
HANDLING
Inputs and outputs are protected against electrostatic discharge in normal handling. However, to be totally safe it is desirable to take normal precautions appropriate to handling MOS devices.
THERMAL CHARACTERISTICS
SYMBOL PARAMETER MIN. MAX. UNIT
V
CC
supply voltage 0.3 +6.0 V
V
I(max)
voltage on all pins 0.3 V
CC
V
I
O(max)
output source current 10 mA
t
sc(max)
maximum short-circuit time on outputs 10 s
Z
L
AC load impedance at video output 600 −Ω
T
stg
IC storage temperature 55 +150 °C
T
j
junction temperature 150 °C
T
amb
operating ambient temperature 10 +80 °C
SYMBOL PARAMETER CONDITIONS VALUE UNIT
R
th j-a
thermal resistance from junction to ambient in free air 120 K/W
Loading...
+ 11 hidden pages