Philips TDA6111Q User Manual
INTEGRATED CIRCUITS
DATA SH EET
TDA6111Q
Video output amplifier
Preliminary specification
Supersedes data of February 1992
File under Integrated Circuits, IC02
Philips Semiconductors
1995 Feb 07
Philips Semiconductors Preliminary specification
Video output amplifier TDA6111Q
FEATURES
• High bandwidth and high slew rate
• Black-current measurement output for Automatic
Black-current Stabilization (ABS)
• Two cathode outputs; one for DC currents, and one for
transient currents
GENERAL DESCRIPTION
The TDA6111Q is a video output amplifier with 16 MHz
bandwidth. The device is contained in a single in-line 9-pin
medium power (DBS9MPF) package, using high-voltage
DMOS technology, intended to drive the cathode of a
colour CRT.
• A feedback output separated from the cathode outputs
• Internal protection against positive appearing
Cathode-Ray Tube (CRT) flashover discharges
• ESD protection
• Simple application with a variety of colour decoders
• Differential input with a designed maximum common
mode input capacitance of 3 pF, a maximum differential
mode input capacitance of 0.5 pF and a differential input
voltage temperature drift of 50 µV/K
• Defined switch-off behaviour.
QUICK REFERENCE DATA
SYMBOL PARAMETER CONDITIONS MIN. TYP. MAX. UNIT
V
V
I
DDH
I
DDL
V
V
T
T
DDH
DDL
I
oc
stg
amb
, V
fb
high level supply voltage 0 − 250 V
low level supply voltage 0 − 14 V
quiescent high voltage supply current Voc= 0.5V
quiescent low voltage supply current Voc= 0.5V
DDH
DDH
input voltage 0 − V
output voltage V
7.0 9.0 11.0 mA
5.0 6.8 8.0 mA
DDL
DDL
− V
DDH
storage temperature −55 − +150 °C
operating ambient temperature −20 − +65 °C
V
V
ORDERING INFORMATION
PACKAGE
TYPE NUMBER
NAME DESCRIPTION VERSION
TDA6111Q DBS9MPF plastic DIL-bent-SIL medium power package with fin; 9 leads SOT111-1
1995 Feb 07 2
Philips Semiconductors Preliminary specification
Video output amplifier TDA6111Q
BLOCK DIAGRAM
handbook, full pagewidth
inverting
input
non-inverting
input
3
1
MIRROR
DIFFERENTIAL
STAGE
MIRROR
supply voltage
input HIGH
6
7 V
V
bias
C
par
feedback
output
9
MIRROR
FOLLOWERS
TDA6111Q
CURRENT
SOURCE
42
ground
(substrate)
supply voltage
input LOW
MIRROR
MGA058
7
8
5
cathode
transient
output
cathode
DC output
black current
measurement
output
Fig.1 Block diagram.
1995 Feb 07 3
Philips Semiconductors Preliminary specification
Video output amplifier TDA6111Q
PINNING
SYMBOL PIN DESCRIPTION
V
ip
V
DDL
V
in
GND 4 ground, substrate
I
om
V
DDH
V
cn
V
oc
V
fb
1 non-inverting voltage input
2 supply voltage LOW
3 inverting voltage input
5 black current measurement
output
6 supply voltage HIGH
7 cathode transient voltage output
8 cathode DC voltage output
9 feedback voltage output
ndbook, halfpage
V
V
V
DDL
V
GND
I
om
DDH
V
V
V
1
ip
2
3
in
4
TDA6111Q
5
6
7
cn
8
oc
9
fb
MGA057
Fig.2 Pin configuration.
1995 Feb 07 4
Philips Semiconductors Preliminary specification
Video output amplifier TDA6111Q
LIMITING VALUES
In accordance with the Absolute Maximum Rating System (IEC 134). Voltages measured with respect to GND (pin 4);
currents as specified in Fig.1; unless otherwise specified.
SYMBOL PARAMETER CONDITIONS MIN. MAX. UNIT
V
DDH
V
DDL
V
I
V
Idm
V
om
V
oc
V
fb
I
in,Iip
I
ocsmL
I
ocsmH
P
tot
T
stg
T
j
V
es
high level supply voltage 0 250 V
low level supply voltage 0 14 V
input voltage 0 V
DDL
V
differential mode input voltage −6+6V
measurement output voltage 0 V
cathode output voltage V
feedback output voltage V
DDL
DDL
V
V
DDL
DDH
DDH
V
V
input current 0 1 mA
low non-repetitive peak cathode
flashover discharge = 100 µC05A
output current
high non-repetitive peak cathode
flashover discharge = 100 nC 0 10 A
output current
total power dissipation 0 4 W
storage temperature −55 +150 °C
junction temperature −20 +150 °C
electrostatic handling
human body model (HBM) − > 1500 V
machine model (MM) − > 400 V
HANDLING
Inputs and outputs are protected against electrostatic discharge in normal handling. However, to be totally safe, it is
desirable to take normal precautions appropriate to handling MOS devices (see
“Handling MOS Devices”
).
QUALITY SPECIFICATION
Quality specification
“SNW-FQ-611 part E”
values”, and can be found in the
“Quality reference handbook”
is applicable, except for ESD Human body model see Chapter “Limiting
(ordering number 9398 510 63011).
THERMAL CHARACTERISTICS
SYMBOL PARAMETER VALUE UNIT
R
th j-c
thermal resistance from junction to case (note 1) 12 K/W
Note
1. External heatsink is required.
1995 Feb 07 5
Loading...