Philips tda5736 DATASHEETS

INTEGRATED CIRCUITS

DATA SH EET

TDA5736; TDA5737

5 V VHF, hyperband and UHF
mixer/oscillators for TV and VCR
3-band tuners

Product specification
Supersedes data of 1996 Oct 16
File under Integrated Circuits, IC02

1996 Oct 25

Philips Semiconductors Product specification

5 V VHF, hyperband and UHF mixer/oscillators
for TV and VCR 3-band tuners

FEATURES

• Balanced mixer with a common emitter input for band A
(single input)

• 2-pin oscillator for band A

• Balanced mixer with a common base input for bands B

and C (balanced input)

• 3-pin oscillator for band B

• 4-pin oscillator for band C

• Local oscillator buffer output for external prescaler

• SAW filter preamplifier with a low output impedance to

drive the SAW filter directly

• Band gap voltage stabilizer for oscillator stability

• Electronic band switch

• External IF filter between the mixer output and the IF

amplifier input.

APPLICATIONS

GENERAL DESCRIPTION

The TDA5736 and TDA5737 are monolithic integrated
circuits that perform the mixer/oscillator functions for
bands A, B and C in TV and VCR tuners. These low power
mixer/oscillators require a power supply of 5 V and are
available in a very small package.

These devices give the designer the capability to design
an economical and physically small 3-band tuner.

They are suitable for European standards, as illustrated in
Fig.17, with the following RF bands: 48.25 to 168.25 MHz,

175.25 to 447.25 MHz and 455.25 to 855.25 MHz.
With an appropriate tuned circuit, they are also suitable for
NTSC all channel tuners (USA and Japan).

The tuner development time can be drastically reduced by
using these devices.

TDA5736; TDA5737

• 3-band all channel TV and VCR tuners

• Any standard.

QUICK REFERENCE DATA

SYMBOL PARAMETER CONDITIONS MIN. TYP. MAX. UNIT

V

P

I

P

f

RF

G

v

NF noise figure band A − 7.5 − dB

V

o

Note

1. The limits are related to the tank circuits used in Fig.17 and the intermediate frequency. Frequency bands may be

adjusted by the choice of external components.

supply voltage − 5.0 − V
supply current − 50 − mA
frequency range RF input; band A; note 1 41 − 171 MHz

RF input; band B; note 1 166 − 451 MHz
RF input; band C; note 1 446 − 861 MHz

voltage gain band A − 23 − dB

band B − 34 − dB
band C − 34 − dB

band B − 8 − dB
band C − 9 − dB

output voltage level causing
1% cross modulation in
channel

band A − 116 − dBµV
band B − 115 − dBµV
band C − 115 − dBµV

1996 Oct 25 2

Philips Semiconductors Product specification

5 V VHF, hyperband and UHF mixer/oscillators for

TDA5736; TDA5737

TV and VCR 3-band tuners

ORDERING INFORMATION

TYPE

NUMBER

NAME DESCRIPTION VERSION

TDA5736M SSOP24 plastic shrink small outline package; 24 leads; body width 5.3 mm SOT340-1
TDA5737M SSOP24 plastic shrink small outline package; 24 leads; body width 5.3 mm SOT340-1

BLOCK DIAGRAM

handbook, full pagewidth

band A oscillator

tuned cicuit

23
(2)

BAND A

OSCILLATOR

21
(4)

band C oscillator

tuned cicuit

22

24

20

(3)

(1)

(5)

BAND C

OSCILLATOR

18
(7)

PACKAGE

band B oscillator

tuned cicuit

19

17

(6)

(8)

BAND B

OSCILLATOR

16
(9)

GND

15
(10)

TDA5736M
TDA5737M

IF outputs

14
(11)

IF

AMPLIFIER

13
(12)

MIXER MIXER MIXER

BAND A

STAGE

(24)1(23)

2

IF

filter input

The numbers in parenthesis represent the TDA5737M.

(19)
6

band A

input

BAND C

STAGE

(21)
4

band C

inputs

BAND B

STAGE

(20)5(22)3(18)

GND

RF

7

band B

inputs

Fig.1 Block diagram.

(17)
8

DC

STABILIZER

(16)
9

V

P

ELECTRONIC

BAND

SWITCH

LOCAL

OSCILLATOR

AMPLIFIER

(15)
10

local oscillator

amplifier outputs

(14)11(13)

12

band switch

input

MGE971

1996 Oct 25 3

Philips Semiconductors Product specification

5 V VHF, hyperband and UHF mixer/oscillators for
TV and VCR 3-band tuners

PINNING

SYMBOL

IFIN1 1 24 IF filter input 1
IFIN2 2 23 IF filter input 2
RFGND 3 22 ground for RF inputs
CIN1 4 21 band C input 1
CIN2 5 20 band C input 2
AIN 6 19 band A input
BIN1 7 18 band B input 1
BIN2 8 17 band B input 2
V

P

LOOUT1 10 15 local oscillator amplifier output 1
LOOUT2 11 14 local oscillator amplifier output 2
BS 12 13 band switch input
IFOUT1 13 12 IF amplifier output 1
IFOUT2 14 11 IF amplifier output 2
GND 15 10 ground (0 V)
BOSCOC1 16 9 band B oscillator output collector 1
BOSCOC2 17 8 band B oscillator output collector 2
COSCIB1 18 7 band C oscillator input base 1
BOSCIB 19 6 band B oscillator input base
COSCOC1 20 5 band C oscillator output collector 1
AOSCOC 21 4 band A oscillator output collector
COSCOC2 22 3 band C oscillator output collector 2
AOSCIB 23 2 band A oscillator input base
COSCIB2 24 1 band C oscillator input base 2

TDA5736 TDA5737

PIN

DESCRIPTION

9 16 supply voltage

TDA5736; TDA5737

1996 Oct 25 4

Philips Semiconductors Product specification

5 V VHF, hyperband and UHF mixer/oscillators for
TV and VCR 3-band tuners

handbook, halfpage

1

IFIN1 COSCIB2

2

IFIN2

RFGND

LOOUT1
LOOUT2

CIN1
CIN2

AIN
BIN1
BIN2

V

BS

P

3
4
5
6

TDA5736M

7
8

9
10
11
12

MBE383

24
23

AOSCIB

22

COSCOC2
AOSCOC

21
20

COSCOC1

19

BOSCIB
COSCIB1

18

BOSCOC2

17
16

BOSCOC1

15

GND
IFOUT2

14
13

IFOUT1

handbook, halfpage

AOSCIB

COSCOC2

AOSCOC

COSCOC1

BOSCIB

COSCIB1

BOSCOC2

BOSCOC1

GND
IFOUT2
IFOUT1

TDA5736; TDA5737

1
2
3
4
5
6

TDA5737M

7
8

9
10
11
12

MGE970

24
23
22
21
20
19
18
17
16
15
14
13

IFIN1COSCIB2
IFIN2
RFGND
CIN1
CIN2
AIN
BIN1
BIN2

V

P
LOOUT1
LOOUT2
BS

Fig.2 Pin configuration (TDA5736M).

1996 Oct 25 5

Fig.3 Pin configuration (TDA5737M).

Philips Semiconductors Product specification

5 V VHF, hyperband and UHF mixer/oscillators for

TDA5736; TDA5737

TV and VCR 3-band tuners

LIMITING VALUES

In accordance with the Absolute Maximum Rating System (IEC 134).

SYMBOL PARAMETER MIN. MAX. UNIT

V

P

V

SW

V

n(max)

I

O

t

sc(max)

T

stg

T

amb

T

j

HANDLING

Human Body Model:

• For TDA5736 GND (15), RFGND (3), V

• For TDA5737 GND (10), RFGND (22), VP(16) separate.

supply voltage −0.3 +7.0 V
switching voltage −0.3 +7.0 V
maximum voltage on each pin with a 22 kΩ resistor

− 35 V

connected in series
output current of each pin to ground −−10 mA
maximum short-circuit time (all pins) − 10 s
IC storage temperature −55 +150 °C
operating ambient temperature −20 +80 °C
junction temperature − +150 °C

(9) separate

P

All pins withstand 2000 V in accordance with the

“MIL-STD-883C”

category B (2000 V) except pins 16 and 17 (8 and 9 for the TDA5737) which withstand 1000 V;

“UZW-BO/FQ-A302”

. Philips specification equivalent to the

R = 1500 Ω, C = 100 pF.
Machine Model:

• For TDA5736 GND (15), RFGND (3), VP(9) separate

• For TDA5737 GND (10), RFGND (22), VP(16) separate.

All pins withstand 200 V in accordance with the

“UZW-BO/FQ-B302”

, Philips specification (revision of: Nov. 6th, 1990)

except pins 16 and 17 (8 and 9 for the TDA5737) which withstand 100 V; R = 0 Ω, C = 200 pF.

THERMAL CHARACTERISTICS

SYMBOL PARAMETER CONDITIONS VALUE UNIT

R

th j-a

thermal resistance from junction to ambient in free air 120 K/W

1996 Oct 25 6

Philips Semiconductors Product specification

5 V VHF, hyperband and UHF mixer/oscillators for

TDA5736; TDA5737

TV and VCR 3-band tuners

CHARACTERISTICS

V

=5V; T

P

SYMBOL PARAMETER CONDITIONS MIN. TYP. MAX. UNIT

Supply

V

P

I

P

V

SW

I

SW

Band A mixer (including IF amplifier)

f

RF

G

v

NF noise figure f

V

o

V

i

g

os

Y

i

C

i

Band A oscillator

f

osc

f

shift

f

drift

V

ripple

Φ

N

=25°C; measured in circuit of Fig.17; unless otherwise specified.

amb

supply voltage 4.5 5.0 5.5 V
supply current 42 50 58 mA
switching voltage depending

on supply voltage V

P

band A; note 1 0 − 0.18VPV
band B; note 1 0.26V
band C; note 1 0.55V

− 0.47VPV

P

− V

P

P

V

switching current band A; note 1 −−2µA

band B; note 1 −−10 µA
band C; note 1 −−25 µA

frequency range note 2 41 − 171 MHz
voltage gain fRF= 50 MHz; see Fig.4; note 3 20.5 23.0 25.5 dB

= 170 MHz; see Fig.4; note 3 20.5 23.0 25.5 dB

f

RF

= 50 MHz; see Figs.5 and 6 − 7.5 9 dB

RF

= 170 MHz; see Figs.5 and 6 − 910dB

f

RF

output voltage level causing
1% cross modulation in
channel

input voltage level causing

fRF= 50 MHz; see Fig.7 115 118 − dBµV

= 170 MHz; see Fig.7 113 116 − dBµV

f

RF

fRF= 170 MHz; note 4 96 100 − dBmV

10 kHz pulling in channel
optimum source conductance

for noise figure

fRF=50MHz − 0.5 − mS

= 170 MHz − 1.1 − mS

f

RF

input admittance fRF= 50 to 170 MHz; see Fig.12 − 0.3 − mS
input capacitance fRF= 50 to 170 MHz; see Fig.12 − 1.9 − pF

frequency range 0.45 V < Vt< 28 V; notes 1 and 5 80 − 210 MHz
frequency shift ∆Vp= 5%; note 6 −−53 kHz
frequency drift with no

compensation

∆T=25°C; NP0 capacitors; note7 −−650 kHz
5 s to 15 mins after switch on; NP0

−−250 kHz

capacitors; note 8

frequency drift with
compensation

∆T=25°C; notes7 and 9;
see Fig.18

5 s to 15 mins after switch on;

−−500 kHz

−−100 kHz

notes 8 and 9; see Fig.18

ripple susceptibility of supply
voltage (peak-to-peak value)

f

= 80 MHz;

osc

4.75 V < VP< 5.25 V; see Fig.8
f

= 210 MHz;

osc

20 −− mV

20 −− mV

4.75 V < VP< 5.25 V; see Fig.8

phase noise measured at the IF output at 10 kHz

81 −− dBc/Hz

offset; Vo= 105 dBµV

1996 Oct 25 7

Philips Semiconductors Product specification

5 V VHF, hyperband and UHF mixer/oscillators for

TDA5736; TDA5737

TV and VCR 3-band tuners

SYMBOL PARAMETER CONDITIONS MIN. TYP. MAX. UNIT

Band B mixer (including IF amplifier)

f

RF

G

v

N noise figure

V

o

V

i

Z

i

Band B oscillator

f

osc

f

shift

f

drift

V

ripple

Φ

N

frequency range note 2 166 − 451 MHz
voltage gain fRF= 170 MHz; see Fig.9; note 3 31 34 37 dB

= 450 MHz; see Fig.9; note 3 31 34 37 dB

f

RF

= 170 MHz; see Fig.10 − 810dB

f

RF

(not corrected for image)
output voltage level causing

1% cross modulation in
channel

input voltage level causing

f

= 450 MHz; see Fig.10 − 810dB

RF

fRF= 170 MHz; see Fig.7 114 117 − dBµV

= 450 MHz; see Fig.7 112 115 − dBµV

f

RF

fRF= 450 MHz; note 4 83 87 − dBµV

10 kHz pulling in channel
input impedance (Rs+jLsω)fRF= 170 to 450 MHz; see Fig.13 − 23 −Ω

f

= 170 to 450 MHz; see Fig.13 − 9 − nH

RF

frequency range 0.45 V < Vt< 28 V; notes 1 and 5 205 − 490 MHz
frequency shift ∆Vp= 5%; note 6 −−53 kHz
frequency drift with no

compensation

∆T=25°C; NP0 capacitors; note7 −−2000 kHz
5 s to 15 mins after switch on; NP0

−−750 kHz

capacitors; note 8

frequency drift with
compensation

∆T=25°C; notes7 and 9;
see Fig.18

5 s to 15 mins after switch on;

−−750 kHz

−−300 kHz

notes 8 and 9; see Fig.18

ripple susceptibility of supply
voltage (peak-to-peak value)

f

= 250 MHz;

osc

4.75 V < VP< 5.25 V; see Fig.8
f

= 490 MHz;

osc

20 −− mV

20 −− mV

4.75 V < VP< 5.25 V; see Fig.8

phase noise measured at the IF output at 10 kHz

81 −− dBc/Hz

offset; Vo= 105 dBmV

Band C Mixer (including IF amplifier)

f

RF

G

v

frequency range note 2 446 − 861 MHz
voltage gain fRF= 450 MHz; see Fig.9; note 3 31 34 37 dB

N noise figure

(not corrected for image)

V

o

output voltage level causing
1% cross modulation in
channel

V

i

input voltage level causing
10 kHz pulling in channel

Z

I

input impedance (Rs+jLsω)fRF= 450 to 860 MHz; see Fig.14 − 28 −Ω

1996 Oct 25 8

= 860 MHz; see Fig.9; note 3 31 34 37 dB

f

RF

= 450 MHz; see Fig.10 − 911dB

f

RF

= 860 MHz; see Fig.10 − 911dB

f

RF

fRF= 450 MHz; see Fig.7 112 115 − dBµV

= 860 MHz; see Fig.7 112 115 − dBµV

f

RF

fRF= 860 MHz; note 4 91 95 − dBµV

= 450 to 860 MHz; see Fig.14 − 10 − nH

f

RF