Philips tda5630 DATASHEETS

INTEGRATED CIRCUITS

DATA SH EET

TDA5630; TDA5631

9 V VHF, hyperband and UHF mixer/oscillator for TV and VCR 3-band tuners

Product speciﬁcation File under Integrated Circuits, IC02

1996 Mar 21

Philips Semiconductors Product speciﬁcation

9 V VHF, hyperband and UHF mixer/oscillator for TV and VCR 3-band tuners

FEATURES

• Balanced mixer with a common emitter input for band A (single input)

• 2-pin oscillator for bands A and B

• Balanced mixer with a common base input for

bands B and C (balanced input)

• 3-pin oscillator for band C

• Local oscillator buffer output for external synthesizer

• SAW filter preamplifier with a low output impedance to

drive the SAW filter directly

• Band gap voltage stabilizer for oscillator stability

• Electronic band switch.

APPLICATIONS

• 3-band all channel TV and VCR tuners

• Any standard.

GENERAL DESCRIPTION

The TDA5630 and TDA5631 are monolithic integrated circuits that perform the mixer/oscillator functions for bands A, B and C in TV and VCR tuners. These low-power mixer/oscillators require a power supply of 9 V and are available in a very small package.

The devices give the designer the capability to design an economical and physically small 3-band tuner.

They are suitable for European standards, as illustrated in Fig.12, with the following RF bands: 48.25 to 168.25 MHz,

175.25 to 447.25 MHz and 455.25 to 855.25 MHz. With an appropriate tuned circuit, they are also suitable for NTSC all channel tuners (USA and Japan).

The tuner development time can be drastically reduced by using these devices.

TDA5630;

TDA5631

QUICK REFERENCE DATA

SYMBOL PARAMETER CONDITIONS MIN. TYP. MAX. UNIT

NF noise ﬁgure band A − 7.5 − dB

Note

1. The limits are related to the tank circuits used in Fig.12 and the intermediate frequency. Frequency bands may be

adjusted by the choice of external components.

supply voltage − 9.0 − V supply current − 35 − mA frequency range RF input; band A; note 1 45 − 180 MHz

RF input; band B; note 1 160 − 470 MHz RF input; band C; note 1 430 − 860 MHz

voltage gain band A − 25 − dB

band B − 36 − dB band C − 36 − dB

band B − 8 − dB band C − 9 − dB

output voltage to get 1% cross modulation in channel

band A − 118 − dBµV band B − 118 − dBµV band C − 118 − dBµV

1996 Mar 21 2

Philips Semiconductors Product speciﬁcation

9 V VHF, hyperband and UHF mixer/oscillator for TV and VCR 3-band tuners

ORDERING INFORMATION

TYPE

NUMBER

NAME DESCRIPTION VERSION

TDA5630T SO20

TDA5630M SSOP20

TDA5631T SO20

TDA5631M SSOP20

BLOCK DIAGRAM

handbook, full pagewidth

band A oscillator

tuned circuit

20 (1)

plastic small outline package; 20 leads; body width 7.5 mm plastic shrink small outline package; 20 leads; body width 4.4 mm plastic small outline package; 20 leads; body width 7.5 mm plastic shrink small outline package; 20 leads; body width 4.4 mm

band B oscillator

tuned circuit

18 (3)

16 (5)

14 (7)

PACKAGE

band C oscillator

tuned circuit

19

17

(2)

(4)

15 (6)

GND

13 (8)

IF outputs

12 (9)

TDA5630;

TDA5631

SOT163-1 SOT266-1 SOT163-1 SOT266-1

MBH044

11 (10)

BAND A

OSCILLATOR

MIXER

BAND A

STAGE

input

(15) 6

(18) 3

RF GND band A

The numbers given in parenthesis represent the TDA5631.

BAND B

OSCILLATOR

MIXER MIXER

BAND B

STAGE

(16) 5

band B

inputs

(17) 4

BAND C

OSCILLATOR

BAND C

STAGE

(19) 2

band C

inputs

(20) 1

TDA5630 TDA5631

DC

STABILIZER

(14) 7

IF AMPLIFIER

ELECTRONIC

BAND

SWITCH

LOCAL

OSCILLATOR

AMPLIFIER

(13) 8

local oscillator

amplifier outputs

(12) 9

band switch

input

(11) 10

1996 Mar 21 3

Fig.1 Block diagram.

Philips Semiconductors Product speciﬁcation

9 V VHF, hyperband and UHF mixer/oscillator for TV and VCR 3-band tuners

PINNING

SYMBOL

TDA5630 TDA5631

CIN1 1 20 band C input 1 CIN2 2 19 band C input 2 RFGND 3 18 ground for RF inputs BIN1 4 17 band B input 1 BIN2 5 16 band B input 2 AIN 6 15 band A input V

LOOUT1 8 13 local oscillator ampliﬁer output 1 LOOUT2 9 12 local oscillator ampliﬁer output 2 BS 10 11 band switch input IFOUT1 11 10 IF ampliﬁer output 1 IFOUT2 12 9 IF ampliﬁer output 2 GND 13 8 ground (0 V) BOSCOC 14 7 band B oscillator output collector COSCOC1 15 6 band C oscillator output collector 1 BOSCIB 16 5 band B oscillator input base COSCOC2 17 4 band C oscillator output collector 2 AOSCOC 18 3 band A oscillator output collector COSCIB 19 2 band C oscillator input base AOSCIB 20 1 band A oscillator input base

DESCRIPTION

7 14 supply voltage

TDA5630;

TDA5631

handbook, halfpage

RFGND

LOOUT1 LOOUT2

CIN1 CIN2

BIN1 BIN2

AIN

1 2 3 4 5 6 7 8 9

TDA5630

MGD265

AOSCIB

COSCIB

AOSCOC

COSCOC2

BOSCIB

COSCOC1

BOSCOC

GND

IFOUT2

IFOUT1

Fig.2 Pin configuration (TDA5630).

1996 Mar 21 4

handbook, halfpage

AOSCOC

COSCOC2

COSCOC1

BOSCOC

Fig.3 Pin configuration (TDA5631).

AOSCIB COSCIB

BOSCIB

GND IFOUT2 IFOUT1

1 2 3 4 5 6 7 8 9

TDA5631

MGD266

20 19 18 17 16 15 14 13 12 11

CIN1 CIN2 RFGND BIN1 BIN2 AIN V

LOOUT1 LOOUT2 BS

Philips Semiconductors Product speciﬁcation

9 V VHF, hyperband and UHF mixer/oscillator for TV and VCR 3-band tuners

LIMITING VALUES

In accordance with the Absolute Maximum Rating System (IEC 134).

SYMBOL PARAMETER MIN. MAX. UNIT

stg

amb

THERMAL CHARACTERISTICS

SYMBOL PARAMETER VALUE UNIT

th j-a

supply voltage −0.3 +10.5 V switching voltage 0 10.5 V output current of each pin referenced to ground −−10 mA maximum short-circuit time (all pins) − 10 s IC storage temperature −55 +150 °C operating ambient temperature −10 +80 °C junction temperature − +150 °C

thermal resistance from junction to ambient in free air

SOT163-1 100 K/W SOT266-1 120 K/W

TDA5630;

TDA5631

HANDLING

Human body model: the IC withstands 2000 V in accordance with the MIL-STD-883C category B (stress reference pins 3, 7 and 13 shorted together for the TDA5630; pins 18, 14 and 8 for the TDA5631).

Machine model: the IC withstands 200 V in accordance with the MIL-STD-883C (stress reference pins 3, 7 and 13 shorted together for the TDA5630; pins 18, 14 and 8 for the TDA5631).

1996 Mar 21 5

Philips Semiconductors Product speciﬁcation

9 V VHF, hyperband and UHF mixer/oscillator for TV and VCR 3-band tuners

TDA5630;

TDA5631

CHARACTERISTICS

=9V; T

=25°C; measured in circuit of Fig.12; unless otherwise speciﬁed.

amb

SYMBOL PARAMETER CONDITIONS MIN. TYP. MAX. UNIT

Supply

supply voltage 8.1 9.0 9.9 V supply current − 35 45 mA switching voltage band A 0 − 1.1 V

band B 1.6 − 2.4 V band C 3.0 − 5.0 V

switching current band A −−2µA

band B −−5µA band C −−10 µA

Band A mixer including IF ampliﬁer

NF noise ﬁgure f

frequency range note 1 45 − 180 MHz voltage gain fRF= 50 MHz; see Fig.4; note 2 22.5 25 27.5 dB

= 180 MHz; see Fig.4; note 2 22.5 25 27.5 dB

= 50 MHz; see Figs 5 and 6 − 7.5 9 dB

= 180 MHz; see Figs 5 and 6 − 910dB

output voltage causing 1%

fRF= 180 MHz; see Fig.7 115 118 − dBµV

cross modulation in channel

input voltage causing 10 kHz

fRF= 180 MHz; note 3 − 100 − dBµV

pulling in channel

optimum source conductance for noise ﬁgure

fRF=50MHz − 0.5 − mS

= 180 MHz − 1.1 − mS

input conductance fRF= 50 MHz; see Fig.13; note 4 − 0.26 − mS

= 180 MHz; see Fig.13; note 4 − 0.35 − mS

input capacitance fRF= 50 to 180 MHz; see Fig.13; note 4 − 2 − pF

Band A oscillator

f f f

osc shift drift

frequency range note 5 80 − 216 MHz frequency shift ∆VP= 10%; note 6 −−200 kHz frequency drift ∆T=25°C with no compensation;

−−500 kHz

NP0 capacitors; note 7 5 s to 15 min after switch on; with no

−−200 kHz

compensation; NP0 capacitors; note 8

1996 Mar 21 6

Philips Semiconductors Product speciﬁcation

9 V VHF, hyperband and UHF mixer/oscillator for TV and VCR 3-band tuners

TDA5630;

TDA5631

SYMBOL PARAMETER CONDITIONS MIN. TYP. MAX. UNIT

Band B mixer including IF ampliﬁer; measurements using hybrid; note 9

NF noise ﬁgure (not corrected

frequency range note 1 160 − 470 MHz voltage gain fRF= 170 MHz; see Fig.8; note 2 33 36 39 dB

= 470 MHz; see Fig.8; note 2 33 36 39 dB

= 170 MHz; see Fig.9 − 810dB

for image) output voltage causing 1%

cross modulation in channel input voltage causing 10 kHz

pulling in channel

= 470 MHz; see Fig.9 − 810dB

fRF= 170 MHz; see Fig.10 115 118 − dBµV

= 470 MHz; see Fig.10 115 118 − dBµV

fRF= 470 MHz; TDA5630T and

− 91 − dBµV

TDA5631T; note 3

= 470 MHz; TDA5630M and

− 83 − dBµV

TDA5631M; note 3

input voltage causing N+5−1 MHz pulling

= 430 MHz; TDA5630T and

TDA5631T; see Fig.11

= 430 MHz; TDA5630M and

− 81 − dBµV

− 66 − dBµV

TDA5631M; see Fig.11

input impedance (RS+jLSω)RS; see Fig.14; note 4 − 30 −Ω

; see Fig.14; note 4 − 8 − nH

Band B oscillator

OSC

shift

drift

frequency range note 5 200 − 500 MHz frequency shift ∆VP= 10%; note 6 −−400 kHz frequency drift ∆T=25°C with no compensation:

−−2 MHz

NP0 capacitors; note 7 5 s to 15 min after switch on; with no

−−300 kHz

compensation: NP0 capacitors; note 8 Band C mixer including IF ampliﬁer; measurements using hybrid; note 9 f

NF noise ﬁgure (not corrected

frequency range note 1 430 − 860 MHz voltage gain fRF= 430 MHz; see Fig.8; note 2 33 36 39 dB

= 860 MHz; see Fig.8; note 2 33 36 39 dB

= 430 MHz; see Fig.9 − 911dB

for image) output voltage causing 1%

cross modulation in channel input voltage causing 10 kHz

pulling in channel

= 860 MHz; see Fig.9 − 911dB

fRF= 430 MHz; see Fig.10 115 118 − dBµV

= 860 MHz; see Fig.10 115 118 − dBµV

fRF= 860 MHz; TDA5630T and

TDA5631T; note 3

= 860 MHz; TDA5630M and

TDA5631M; note 3

input voltage causing

= 820 MHz; see Fig.11 − 61 − dBµV

N+5−1 MHz pulling

1996 Mar 21 7

− 87 − dBµV

− 93 − dBµV

Philips Semiconductors Product speciﬁcation

9 V VHF, hyperband and UHF mixer/oscillator for TV and VCR 3-band tuners

TDA5630;

TDA5631

SYMBOL PARAMETER CONDITIONS MIN. TYP. MAX. UNIT

input impedance (RS+jLSω)RS at fRF= 430 MHz; see Fig.15; note 4 − 40 −Ω

at fRF= 860 MHz; see Fig.15; note 4 − 53 −Ω

at fRF= 430 to 860 MHz; see Fig.15;

− 9 − nH

note 4

Band C oscillator

OSC

shift

drift

frequency range note 5 470 − 900 MHz frequency shift ∆VP= 10%; note 6 −−400 kHz frequency drift ∆T=25°C with no compensation;

−−2.5 MHz

NP0 capacitors; note 7

5 s to 15 min after switch on; with no

−−600 kHz

compensation; NP0 capacitors; note 8

IF ampliﬁer

LO output; R

output reﬂection coefﬁcient magnitude; see Fig.16; note 4 −−10 − dB

output impedance (RS+jLSω)

= 100 Ω

output admittance (GP+jCPω)

phase; see Fig.16; note 4 − 9 −

RS; see Fig.16; note 4 − 95 −Ω

; see Fig.16; note 4 − 45 − nH

= 80 MHz; see Fig.17; note 4 − 2.5 − mS

osc

− 0.9 − pF

= 900 MHz; see Fig.17; note 4 − 3.5 − mS

osc

− 0.7 − pF

SRF spurious signal on LO output

output voltage RL= 100 Ω 83 91 100 dBµV

note 10 −−−10 dBc

with respect to LO output signal

SHD LO signal harmonics with

−−−10 dBc

respect to LO signal

1996 Mar 21 8

+ 16 hidden pages

Philips tda5630 DATASHEETS

Specifications and Main Features

Frequently Asked Questions

User Manual