Philips TDA4510-V9 Datasheet

DATA SH EET
Product specification File under Integrated Circuits, IC02
March 1986
INTEGRATED CIRCUITS
TDA4510
PAL decoder
Philips Semiconductors Product specification
PAL decoder TDA4510
GENERAL DESCRIPTION
The TDA4510 is a colour decoder for the PAL standard, which is pin sequent compatible with multistandard decoder TDA4555 and also pin compatible with NTSC decoder TDA4570. It incorporates the following functions:
Chrominance part
Gain controlled chrominance amplifier with operating point control stage
Chrominance output stage for driving the 64 µs delay line
Blanking circuit for the colour burst signal
Automatic chrominance control (ACC) with sampled rectifier during burst-key
Oscillator and control voltage part
Reference oscillator for double subcarrier frequency
Gated phase comparison
Identification demodulator and automatic colour killer
Sandcastle pulse detector
Service switch
Demodulator part
Two synchronous demodulators for the (B-Y) and (R-Y) signals
PAL flip-flop and PAL switch
Colour switching stages
Separate colour switching output
(B-Y) and (R-Y) signal output stages
Internal filtering of residual carrier
QUICK REFERENCE DATA
PACKAGE OUTLINE
16-lead DIL; plastic (SOT38); SOT38-1; 1996 November 26.
Supply voltage V
P
= V
7-3
typ. 12 V
Supply current I
P
= I
7
typ. 50 mA
Chrominance input signal (peak-to-peak) V
9-3(p-p)
10 to 400 mV
Chrominance output signal (peak-to-peak) V
6-3(p-p)
typ. 1,6 V
Colour difference output signals (peak-to-peak values)
(R-Y) signal V
1-3(p-p)
typ. 1,05 V ± 2dB
(B-Y) signal V
2-3(p-p)
typ. 1,33 V ± 2dB
Sandcastle pulse, required amplitude for
burst gating level V
15-3
typ. 7,7 V
horizontal pulse separation V
15-3
typ. 4,5 V
vertical and horizontal pulse separation V
15-3
typ. 2,5 V
March 1986 3
Philips Semiconductors Product specification
PAL decoder TDA4510
Fig.1 Block diagram.
External capacitors in Fig.1
C1 filter capacitor for control voltage (pin 10)
C2 filter capacitor for identification signal (pin 14)
Loading...
+ 6 hidden pages