INTEGRATED CIRCUITS
DATA SH EET
TDA4510
PAL decoder
Product specification
File under Integrated Circuits, IC02
March 1986
Philips Semiconductors Product specification
PAL decoder TDA4510
GENERAL DESCRIPTION
The TDA4510 is a colour decoder for the PAL standard, which is pin sequent compatible with multistandard decoder
TDA4555 and also pin compatible with NTSC decoder TDA4570. It incorporates the following functions:
Chrominance part
• Gain controlled chrominance amplifier with operating point control stage
• Chrominance output stage for driving the 64 µs delay line
• Blanking circuit for the colour burst signal
• Automatic chrominance control (ACC) with sampled rectifier during burst-key
Oscillator and control voltage part
• Reference oscillator for double subcarrier frequency
• Gated phase comparison
• Identification demodulator and automatic colour killer
• Sandcastle pulse detector
• Service switch
Demodulator part
• Two synchronous demodulators for the (B-Y) and (R-Y) signals
• PAL flip-flop and PAL switch
• Colour switching stages
• Separate colour switching output
• (B-Y) and (R-Y) signal output stages
• Internal filtering of residual carrier
QUICK REFERENCE DATA
Supply voltage V
Supply current I
Chrominance input signal (peak-to-peak) V
Chrominance output signal (peak-to-peak) V
Colour difference output signals (peak-to-peak values)
−(R-Y) signal V
−(B-Y) signal V
Sandcastle pulse, required amplitude for
burst gating level V
horizontal pulse separation V
vertical and horizontal pulse separation V
= V
P
= I
P
9-3(p-p)
6-3(p-p)
1-3(p-p)
2-3(p-p)
15-3
15-3
15-3
typ. 12 V
7-3
7
typ. 50 mA
10 to 400 mV
typ. 1,6 V
typ. 1,05 V ± 2dB
typ. 1,33 V ± 2dB
typ. 7,7 V
typ. 4,5 V
typ. 2,5 V
PACKAGE OUTLINE
16-lead DIL; plastic (SOT38); SOT38-1; 1996 November 26.
March 1986 2
Philips Semiconductors Product specification
PAL decoder TDA4510
March 1986 3
Fig.1 Block diagram.
External capacitors in Fig.1
C1 filter capacitor for control voltage (pin 10)
C2 filter capacitor for identification signal (pin 14)