Philips TDA3664AT-N1, TDA3664-N1, TDA3664T-N1 Datasheet

DATA SH EET

Preliminary specification
Supersedes data of 1999 Aug 11
File under Integrated Circuits, IC01

1999 Sep 01

INTEGRATED CIRCUITS

TDA3664

Very low dropout voltage/quiescent
current 5 V voltage regulator

1999 Sep 01 2

Philips Semiconductors Preliminary specification

Very low dropout voltage/quiescent
current 5 V voltage regulator

TDA3664

FEATURES
General

• Fixed 5 V, 100 mA regulator

• Supply voltage range up to +33 V (45 V)

• Very low quiescent current (typically 15 µA)

• Very low dropout voltage

• High ripple rejection

• Very high stability

– Electrolytic capacitors: ESR (Equivalent Series

resistance) < 38 Ω at I

REG

≤ 25 mA

– Other capacitors: 100 nFat 200 µA ≤ I

REG

≤ 100 mA

see Fig.5 and Fig.6

• Pin compatible family TDA3662 up to TDA3666.

Protections

• Reverse polarity safe (down to −25 V without high
reverse current)

• Negative transient of 50 V (RS=10Ω, t < 100 ms)

• Able to withstand voltages up to 18 V at the output

(supply line may be short-circuited)

• ESD protection on all pins

• DC short-circuit safe to ground and VP of regulator

output

• Temperature protection (Tj> 150 °C).

GENERAL DESCRIPTION

TheTDA3664 is a fixed 5 V voltage regulator with very low
dropout voltage/quiescent current, which operates over a
wide supply voltage range.

The regulator is available as:

• TDA3664T: SO8 package (non-automotive)

• TDA3664AT: SO8 package (automotive)

• TDA3664: SOT223 package (automotive).

Automotive: VP≤ 50P V, −40 °C ≤ T

amb

≤ +125 °C.

Non-automotive: VP≤ 22V, −40 °C ≤ T

amb

≤ +85 °C.

QUICK REFERENCE DATA

ORDERING INFORMATION

SYMBOL PARAMETER CONDITIONS MIN. TYP. MAX. UNIT

Supply

V

P

supply voltage

TDA3664 regulator on 3 14.4 45 V
TDA3664AT regulator on 3 14.4 45 V
TDA3664T regulator on 3 14.4 33 V

I

q(tot)

total quiescent supply current
(all versions)

VP= 14.4 V; no load − 15 30 µA

Voltage regulator

V

REG

regulator output voltage

TDA3664T 8 V ≤ V

P

≤ 22 V 4.8 5.0 5.2 V

TDA3664 and TDA3664AT 6 V ≤ V

P

≤ 45 V 4.75 5.0 5.25 V

I

REG

regulator output current 0.5 mA ≤ I

REG

≤ 100 mA 4.75 5.0 5.25 V

V

REG(drop)

dropout voltage I

REG

=50mA − 0.18 0.3 V

TYPE

NUMBER

PACKAGE

NAME DESCRIPTION VERSION

TDA3664 − plastic surface mounted package; collector pad for good heat transfer; 4 leads SOT223
TDA3664T SO8 plastic small outline package; 8 leads; body width 3.9 mm SOT96-1
TDA3664AT SO8 plastic small outline package; 8 leads; body width 3.9 mm SOT96-1

1999 Sep 01 3

Philips Semiconductors Preliminary specification

Very low dropout voltage/quiescent
current 5 V voltage regulator

TDA3664

BLOCK DIAGRAM

PINNING

SYMBOL

PIN

DESCRIPTION

SOT223 SO8

V

P

1 8 supply voltage
GND 2 and 4 3 ground
REG 3 1 regulator output
n.c. − 2, 4, 5, 6 and 7 not connected

handbook, halfpage

MGL809

REGULATOR

2, 4 (3)

3 (1)

GND

1 (8)

REG

V

P

BANDGAP

TDA3664

THERMAL

PROTECTION

Fig.1 Block diagram for SOT223.

Pins between brackets are for the SO8 version.

handbook, halfpage

132

4

GND

MGL810

GND

V

P

REG

Fig.2 Pin configuration of SOT223. Fig.3 Pin configuration of SO8.

handbook, halfpage

TDA3664

MDA959

1

REG

V

P

n.c. n.c.

GND n.c.

n.c. n.c.

2
3
4

8
7
6
5

1999 Sep 01 4

Philips Semiconductors Preliminary specification

Very low dropout voltage/quiescent
current 5 V voltage regulator

TDA3664

FUNCTIONAL DESCRIPTION

The TDA3664 is a fixed 5 V regulator which can deliver
output currents up to 100 mA. The regulator is available in
SO8 and SOT223 packages. The regulator is intended for
portable, mains, telephone and automotive applications.
To increase the lifetime of batteries, a specially built-in
clamp circuit keeps the quiescent current of this regulator
very low, also in dropout and full load conditions.

Theregulatorremainsoperationaldown to very low supply
voltages, below which it switches off.

A temperature protection is included, which switches the
regulator output off at IC temperatures above 150 °C.

A new output structure guarantees the stability of the
regulator with an ESR up to 38 Ω. This is very attractive as
the ESR of an electrolytic capacitor increases strongly at
low temperatures (no expensive tantalum capacitor
required).

LIMITING VALUES

In accordance with the Absolute Maximum Rating System (IEC 134).

THERMAL CHARACTERISTICS

QUALITY SPECIFICATION

In accordance with

“SNW-FQ-611E”

. The number of the quality specification can be found in the

“Quality Reference

Handbook”

.

SYMBOL PARAMETER CONDITIONS MIN. MAX. UNIT

V

P

supply voltage

TDA3664T − 22 V
TDA3664 − 45 V
TDA3664AT − 45 V

V

P(rp)

reverse polarity supply voltage non-operating −−25 V

P

tot

total power dissipation T

amb

=25°C
SO8 − 0.8 W
SOT223 − 5W

T

stg

storage temperature non-operating −55 +150 °C

T

amb

ambient temperature range operating

TDA3664T −40 +85 °C
TDA3664 −40 +125 °C
TDA3664AT −40 +125 °C

T

j

junction temperature operating −40 +150 °C

SYMBOL PARAMETER CONDITIONS VALUE UNIT

R

th(j-a)

thermal resistance from junction to ambient in free air, soldered in

SO8 155 K/W
SOT223 100 K/W

R

th(j-c)

thermal resistance from junction to case (SOT223) in free air 25 K/W

1999 Sep 01 5

Philips Semiconductors Preliminary specification

Very low dropout voltage/quiescent
current 5 V voltage regulator

TDA3664

CHARACTERISTICS

VP= 14.4 V; T

amb

=25°C; see Fig.4; unless otherwise specified.

Notes

1. The regulator output will follow V

P

if VP<V

REG+VREG(drop)

2. TDA3664T: VP≤ 22 V; −40 °C ≤ T

amb

≤ 85 °C.

SYMBOL PARAMETER CONDITIONS MIN. TYP. MAX. UNIT

Supply voltage

V

P

supply voltage

TDA3664 regulator operating; note 1 3 14.4 45 V
TDA3664AT regulator operating; note 1 3 14.4 45 V
TDA3664T regulator operating; note 1 3 14.4 33 V

I

q

quiescent current VP= 4.5 V; I

REG

=0 − 10 −µA

V

P

= 14.4 V; I

REG

=0 − 15 30 µA

6V≤V

P

≤22 V; I

REG

=10mA − 0.2 0.5 mA

6V≤V

P

≤22 V; I

REG

=50mA − 1.4 2.5 mA

Regulator output: on pin REG (I

REG

= 0.5 mA), −40 °C ≤ T

amb

≤ 125 °C; note 2

V

REG

regulated output voltage I

REG

= 0.5 mA, 4.8 5.0 5.2 V

8V≤V

P

≤22 V, T

amb

=25°C

I

REG

= 0.5 mA, 8 V ≤ VP≤ 22 V 4.75 5.0 5.25 V

0.5 mA ≤ I

REG

≤ 100 mA 4.75 5.0 5.25 V

6V≤V

P

≤45 V; note 2 4.75 5.0 5.25 V

∆V

REG(line)

line regulation voltage 8 V ≤ VP≤ 16 V, T

amb

=25°C − 110mV

7V≤V

P

≤22 V, T

amb

=25°C − 130mV

7V≤V

P

≤45 V; note 2 − 150mV

∆V

REG(load)

load regulation voltage 0.5 mA ≤ I

REG

≤ 50 mA − 10 50 mV

SVRR supply voltage ripple rejection f

i

= 120 Hz; V

ripple

=1V

rms

50 60 − dB

V

REG(drop)

dropout voltage I

REG

= 50 mA; VP= 4.5 V;

T

amb

≤ 85 °C

− 0.18 0.3 V

I

REG(crl)

current limit V

REG

> 4.5 V 0.17 0.25 − A

V

REG(stab)

long-term stability − 20 − mV/1000 h

I

LO(rp)

output leakage current with reverse polarity input

VP= −15 V, V

REG

≤ 0.3 V

− 1 500 µA