Philips TDA1516BQ-N2-S10, TDA1516BQ-N2 Datasheet
DATA SH EET
Product specification
File under Integrated Circuits, IC01
July 1994
INTEGRATED CIRCUITS
TDA1516BQ
24 W BTL or 2 x 12 watt stereo car
radio power amplifier
July 1994 2
Philips Semiconductors Product specification
24 W BTL or 2 x 12 watt stereo car radio
power amplifier
TDA1516BQ
GENERAL DESCRIPTION
The TDA 1516BQ is an integrated class-B output amplifier in a 13-lead single-in-line (SlL) plastic power package.
The device is primarily developed for car radio applications.
FEATURES
• Requires very few external components
• Flexibility in use − stereo as well as mono BTL
• High output power (without bootstrap)
• Low offset voltage at output (important for BTL)
• Fixed gain
• Good ripple rejection
• Mute/stand-by switch
• Load dump protection
• A.C. and d.c. short-circuit-safe to ground and V
P
• Thermally protected
• Reverse polarity safe
• Capability to handle high energy on outputs (VP = 0 V)
• No switch-on/switch-off plop
• Flexible leads
• Low thermal resistance
• Identical inputs (inverting and non-inverting)
• Compatible with TDA1518Q (except gain)
QUICK REFERENCE DATA
PARAMETER CONDITIONS SYMBOL MIN. TYP. MAX. UNIT
Supply voltage range
operating V
P
6,0 14,4 18,0 V
non-operating V
P
−−30,0 V
load dump protected V
P
−−45,0 V
Repetitive peak output
current I
ORM
−−4A
Total quiescent current I
tot
− 30 − mA
Stand-by current I
sb
− 0,1 100 µA
Switch-on current I
sw
−−40 µA
Input impedance
BTL |ZI|25−−kΩ
stereo |Z
I
|50−−kΩ
Stereo application
Output power THD = 10%; 4 Ω P
o
− 6 − W
THD = 10%; 2 Ω P
o
− 11 − W
Channel separation α 40 −−dB
Noise output voltage V
no(rms)
− 50 −µV
BTL application
Output power THD = 10%; 4 Ω P
o
− 22 − W
Supply voltage R
S
= 0 Ω;
ripple rejection f = 100 Hz to 10 kHz RR 48 −−dB
D.C. output offset voltage |∆V
O
| −−100 mV
July 1994 3
Philips Semiconductors Product specification
24 W BTL or 2 x 12 watt stereo car radio
power amplifier
TDA1516BQ
PACKAGE OUTLINE
13-lead SIL-bent-to-DIL; plastic power (SOT141); SOT141-6; 1996 July 24.
Fig.1 Block diagram.
July 1994 4
Philips Semiconductors Product specification
24 W BTL or 2 x 12 watt stereo car radio
power amplifier
TDA1516BQ
PINNING
FUNCTIONAL DESCRIPTION
The TDA1516BQ contains two identical amplifiers with differential input stages. This device can be used for stereo or
bridge applications. The gain of each amplifier is fixed at 20 dB. A special feature of this device is the mute/stand-by
switch which has the following features:
• low stand-by current (< 100 µA)
• low mute/stand-by switching current (low cost supply switch)
• mute condition.
RATINGS
Limiting values in accordance with the Absolute Maximum System (IEC 134)
1 −INV1 non-inverting input 1 8 BS2 bootstrap 2
2 INV inverting input 9 OUT2 output 2
3 GND1 ground (signal) 10 V
P
supply voltage
4V
ref
reference voltage 11 M/SS mute/stand-by switch
5 OUT1 output 1 12 RR supply voltage ripple rejection
6 BS1 bootstrap 1 13 −INV2 non-inverting input 2
7 GND2 ground (substrate)
PARAMETER CONDITIONS SYMBOL MIN. MAX. UNIT
Supply voltage
operating V
P
− 18 V
non-operating V
P
− 30 V
load dump protected during 50 ms;
tr≥ 2,5 ms V
P
− 45 V
A.C. and d.c. short-circuit-
safe voltage V
PSC
− 18 V
Reverse polarity V
PR
− 6V
Energy handling capability
at outputs V
P
= 0 V − 200 mJ
Non-repetitive peak output
current I
OSM
− 6A
Repetitive peak output
current I
ORM
− 4A
Total power dissipation see Fig.2 P
tot
− 25 W
Crystal temperature T
c
− 150 °C
Storage temperature range T
stg
−55 + 150 °C
Loading...